Skip to the content
12345678

LP2951D

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.235V~30V、5V 100mA 30V 430uV 450mV@(100mA) 75uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LP2951D
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOIC-8
Pins
8
In stock
1,349 at JLCPCB (C414606)
Used on
11 open-source boards

Overview

The LP2951D is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃@(Tj) 1 1.235V~30V、5V 100mA 30V 430uV 450mV@(100mA) 75uA Fixed、Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Celestial_Power_Linear_VReg:TI LP2951D, from Altium's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,349 are in stock at JLCPCB (part C414606). 11 open-source boards in 10 repositories on GitHub use it.

Symbol

OUT1FEEDBACK7IN8SENSE2ERROR_N5SHUTDOWN3VTAP6GND4
Celestial_Power_Linear_VReg:TI LP2951DFrom Altium's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

Pinout

8
The pins of the LP2951D
PinNameType
1OUTPassive
2SENSEPassive
3SHUTDOWNPassive
4GNDPassive
5ERROR_NPassive
6VTAPPassive
7FEEDBACKPassive
8INPassive

Open-source boards using it

11See all 11
  • 4 layers100 × 100 mmRobot, the printed circuit board in 3D

    Robot

    UBC-Thunderbots/Electrical

    All things electrical, from radio communication to BLDC motors. Zappity zap!

    186 parts3
  • 2 layers108 × 66 mmAldu, the printed circuit board in 3D

    Aldu

    Kreyl/Aldu

    Trees of Valinor

    122 parts
  • 2 layers60 × 79 mmLedBandRadio, the printed circuit board in 3D

    LedBandRadio

    Kreyl/LedBandRadio

    MCU+Radio868 with F antenna + powerful BUCK (12 to 5) + 3x switch for RGB LED band + connector for WS2812 band

    104 parts
  • 2 layers112.3 × 60 mmLedBandRxTx, the printed circuit board in 3D

    LedBandRxTx

    Kreyl/LedBandRxTx

    76 parts
  • 4 layers168 × 90 mmSiltear, the printed circuit board in 3D

    Siltear

    Kreyl/Siltear

    288 parts
  • 2 layers87 × 88 mmTelegraph, the printed circuit board in 3D

    Telegraph

    Kreyl/Telegraph

    187 parts
  • 2 layersTorch4, the printed circuit board in 3D

    Torch4

    Kreyl/Torches

    Different torch projects here

    48 parts
  • 4 layers72 × 72 mmLedPicture, the printed circuit board in 3D

    LedPicture

    Kreyl/LedPicture

    136 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LP2951D?

Yes. The symbol is Celestial_Power_Linear_VReg:TI LP2951D and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LP2951D?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the LP2951D datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LP2951D?

JLCPCB lists it as part C414606, with 1,349 in stock; the sellers' links on this page open their listings.

What can replace the LP2951D?

Parts like it in the library: the L78L05ACD13 by STMicroelectronics, the L78L05ABD13 by STMicroelectronics, the LM78L05ACMX by Texas Instruments and the MC78L05ABD by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LP2951D?

11 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.