
Locket
Kreyl/Locket
Locket ptetending to be universal. Radio, RGB LED, vibro, beeper, slide switch, button, pill connector, accelerometer, 2xAAA

LedBandRxTx is an open-source printed circuit board by Kreyl, from the Kreyl/LedBandRxTx repository on GitHub. It is a 2-layer board of 112.3 × 60 mm with 76 parts on 57 nets, routed with 2,154 tracks and 294 vias.
It is built around the CC1101RGP, MMA8452QT and 0896BM15A0001E, with the LP2951D among its other parts. Its parts include 28 capacitors, 11 resistors, 6 switches, 4 fuses and 3 inductors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitors:CAP_0603 | C1, C8, C10, C11, C15, C17, C19, C20, C25 |
| 4 | 10u | Capacitors:CAP_0805 | C2, C7, C13, C27 |
| 4 | BUTTON | BtnsSwitches:BTN_SWT9 | SW1, SW2, SW3, SW4 |
| 4 | Fuse0R | Resistors:RES_0603_SOLDERFUSE | F1, F2, F3, F4 |
| 4 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4 |
| 3 | 10n | Capacitors:CAP_0603 | C14, C18, C21 |
| 3 | 51R | Resistors:RES_0603 | R3, R4, R5 |
| 3 | TESTPOINT | PCB:TESTPOINT_1MM | TP1, TP2, TP3 |
| 2 | 100k | Resistors:RES_0603 | R10, R11 |
| 2 | 10pF | Capacitors:CAP_0603 | C6, C9 |
| 2 | 1u | Capacitors:CAP_0603 | C4, C22 |
| 2 | 220pF | Capacitors:CAP_0603 | C12, C23 |
| 2 | 4k7 | Resistors:RES_0603 | R7, R8 |
| 2 | REFPOINT | PCB:REF_POINT_1MM | RP1, RP2 |
| 2 | TB201209 G152 | Inductors:IND_0805 | L1, L2 |
| 1 | 0896BM15A0001 | Radio:BALUN_JOHANSON868 | BLN1 |
| 1 | 1.5pF | Capacitors:CAP_0402 | C26 |
| 1 | 1000pF | Capacitors:CAP_0603 | C3 |
| 1 | 1000u | Capacitors:CAP_10xxR | C5 |
| 1 | 100pF | Capacitors:CAP_0402 | C24 |
| 1 | 10k | Resistors:RES_0603 | R9 |
| 1 | 12k | Resistors:RES_0603 | R2 |
| 1 | 20k | Resistors:RES_0603 | R1 |
| 1 | 27MHz | Quartz:03225C4 | XTAL1 |
| 1 | 3.3pF | Capacitors:CAP_0603 | C16 |
| 1 | 5.6nH | Inductors:IND_0402 | L3 |
| 1 | 56k | Resistors:RES_0603 | R6 |
| 1 | ANT_PCB_MONO_2PIN | Radio:ANT_INVF_LEDBANDRXTX | ANT1 |
| 1 | BARREL_SOCKET | Connectors:Barrel | XL1 |
| 1 | BATx3 | Connectors:18650x3 | BAT1 |
| 1 | CC1101 | QFN_DFN:QFN20 | DD3 |
| 1 | CONN_3 | Connectors:PLS-3 | XL4 |
| 1 | CONN_3 | Connectors:TermiBlockHeader_508_x3_R | XL5 |
| 1 | CONN_6 | Connectors:PLS-6 | XL3 |
| 1 | DIPx4 | BtnsSwitches:DIP_SMD_X4 | SW6 |
| 1 | DoNotMount | Capacitors:CAP_0402 | C28 |
| 1 | IPS6041 | SO_DIL_TSSOP:SO8HEATSINK | DA2 |
| 1 | LED_RGB 5050 | LEDs:LED_5050 | Q1 |
| 1 | LP2951 | SO_DIL_TSSOP:SO8 | DA1 |
| 1 | MMA8452Q | QFN_DFN:QFN16_5_3 | DD2 |
| 1 | STM32L151CxTx | LQFP_TQFP:LQFP48 | DD1 |
| 1 | ST_SWD | Connectors:PLS-4 | XL2 |
| 1 | SWITCH_H | BtnsSwitches:SW_SS9 | SW5 |

Kreyl/Locket
Locket ptetending to be universal. Radio, RGB LED, vibro, beeper, slide switch, button, pill connector, accelerometer, 2xAAA



Kreyl/LedBandRadio
MCU+Radio868 with F antenna + powerful BUCK (12 to 5) + 3x switch for RGB LED band + connector for WS2812 band




It measures 112.3 × 60 mm and has 2 copper layers, 1.6 mm thick.
76 parts, built around the CC1101RGP, MMA8452QT, 0896BM15A0001E and LP2951D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kreyl/LedBandRxTx repository on GitHub, at the commit this page was made from: the board is Hardware/LedbandRxTx.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.