Skip to the content

MMA8452QT

NXP SemiconductorsExtended

Part id
nxp/MMA8452QT
Category
Attitude Sensor, Gyroscope
Package
QFN-16(3x3)
Pins
16
In stock
0 at JLCPCB (C122560)
Used on
28 open-source boards

Overview

The MMA8452QT is an attitude Sensor, Gyroscope made by NXP Semiconductors in a QFN-16(3x3) package with 16 pins.

PCBKit's library has its KiCad symbol (dk_Motion-Sensors-Accelerometers:MMA8452QT, from Digikey) and its footprint (Source_Footprints:VQFN-16_3x3mm, from Digikey), ready for a KiCad board. JLCPCB lists it (part C122560). 28 open-source boards in 25 repositories on GitHub use it.

Symbol

1VDDIO2BYP3DNC4SCL5GND6SDA7SA08NC9INT210GND11INT112GND13NC14VDD15NC16NC
dk_Motion-Sensors-Accelerometers:MMA8452QTFrom Digikey

Footprint

Source_Footprints:VQFN-16_3x3mmFrom Digikey

From the datasheet

10
Supply, least
1.95 V · VDD, recommended operating, min · p. 7
Supply, most
3.6 V · VDD, recommended operating, max · p. 7
Supply, least
1.62 V · VDDIO, recommended operating, min · p. 7
Supply, most
3.6 V · VDDIO, recommended operating, max · p. 7
Supply, absolute maximum
3.6 V · VDD, absolute maximum · p. 9
Works from
-40 °C · Operating temperature, min · p. 7
Works up to
85 °C · Operating temperature, max · p. 7
Takes working
165 µA · Normal mode, ODR = 800 Hz, VDD = 2.5 V, typical · p. 7
Takes at most
1 mA · Boot sequence, VDD = 2.5 V, duration up to 0.5 ms, max · p. 7
Takes asleep
1.8 µA · Standby, VDD = 2.5 V, VDDIO = 1.8 V, 25 °C, typical · p. 7

Open-source boards using it

28See all 28
  • 2 layers95.2 × 154.5 mmBadge2017, the printed circuit board in 3D

    Badge2017

    cryptovillage/badge2017

    The 2017 Crypto and Privacy Village Badge

    233 parts31
  • 2 layers30 × 30 mmBlewatch, the printed circuit board in 3D

    Blewatch

    jim-kirisame/LotWatch

    A BLE Watch using nrf51822

    27 parts22
  • 4 layers30 × 50 mmWireless logger, the printed circuit board in 3D

    Wireless logger

    bnahill/wireless_logger

    A compact wireless inertial logging and processing hardware platform

    155 parts7
  • 2 layers63.7 × 89.4 mmSwadge devkit, the printed circuit board in 3D

    Swadge devkit

    AEFeinstein/Super-2020-Swadge-HW

    The hardware for a hardware badge (Swadge) for Magfest 2020

    69 parts6GPL-3.0
  • 4 layers50.5 × 80 mmBasic, the printed circuit board in 3D

    Basic

    aep/artanis-light

    vehicle gps tracker with battery ================================

    147 parts2
  • 2 layers310 × 60 mmPCB Keys, the printed circuit board in 3D

    PCB Keys

    g200kg/multiribbon

    135 parts2MIT
  • 2 layers50 × 50 mmHeart rate monitor, the printed circuit board in 3D

    Heart rate monitor

    jkravanja/heart_rate_monitor

    Heart rate monitor designed in KiCad, using Nordic NRF51822 bluetooth module and TI AFE4400 heart rate module.

    232 parts2

Questions

Is there a KiCad symbol and footprint for the MMA8452QT?

Yes. The symbol is dk_Motion-Sensors-Accelerometers:MMA8452QT and the footprint Source_Footprints:VQFN-16_3x3mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MMA8452QT?

QFN-16(3x3), with 16 pins. Its footprint is drawn on this page.

Where is the MMA8452QT datasheet?

NXP Semiconductors publishes it: the Datasheet link on this page opens it.

Where can I order the MMA8452QT?

JLCPCB lists it as part C122560, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the MMA8452QT?

28 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.