

Heart rate monitor
Heart rate monitor designed in KiCad, using Nordic NRF51822 bluetooth module and TI AFE4400 heart rate module.
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 232
- Nets
- 66
- Pads
- 439
- Tracks, vias
- 766, 72
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Jan 2016
- Updated
- 17 Jan 2016
Overview
Heart rate monitor is an open-source printed circuit board by jkravanja, from the jkravanja/heart_rate_monitor repository on GitHub. It is a 2-layer board of 50 × 50 mm with 232 parts on 66 nets, routed with 766 tracks and 72 vias.
It is built around the MMA8452QT. Its parts include 29 capacitors, 15 resistors, 6 diodes, 5 ICs and 5 transistors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
1README
README.mdheart_rate_monitor
Heart rate monitor designed in KiCad, using Nordic Semiconductor NRF51822 bluetooth module and TI AFE4400 heart rate module.
The repository contains a KiCad design of a 5x5 cm heart rate monitor breakout board. Some libraries were borrowed from Guan Yang's github projects (https://github.com/guanix/boards). Also, some design aspects of the circuit were inspired by HackManhattan Nordic nrf51822 beakout board (http://dangerousprototypes.com/2013/05/19/hackmanhattans-nordic-nrf51822-breakout-board/)
In addition to AFE440 for heart rate measurements and NRF51822 for BLE communications, the circuit also contains a Freescale MMA8452 3-axis accelerometer, CAT24M01 1Mb EEPROM and an additional heart rate circuit composed of just a few simple elements (see bottom center of the schematics). The circuit was inspired by this article and presents a cheaper and simpler option to AFE4400.
Image of manufactured PCB

Components were soldered with reflow technique. Some joints had to be manually corrected using soldering iron

Parts
232| Qty | Value | Footprint | References |
|---|---|---|---|
| 158 | GND_VIA | , , , , , , , , , , , , , , , +142 | |
| 4 | 0.1uF | SM0402 | C8, C11, C15, C19 |
| 4 | 20pF | SM0402 | C5, C6, C13, C14 |
| 4 | 4.7k | SM0402 | R3, R7, R8, R9 |
| 3 | 0.1 uF | SM0402 | C1, C2, C16 |
| 3 | MOSFET_P | SOT23GDS | Q1, Q4, Q5 |
| 3 | P*** | 1pin | 1PIN, 1PIN, 1PIN |
| 2 | 1 nF | SM0603 | C25, C29 |
| 2 | 1 uF | SM0402 | C27, C28 |
| 2 | 100 k | SM0603 | R11, R12 |
| 2 | 1uF | SM0402 | C12, C20 |
| 2 | 2.2uF | SM0402 | C21, C22 |
| 2 | 33p | SM0402 | C17, C18 |
| 2 | 4.7uF | SM0402 | C4, C7 |
| 2 | MOSFET_N | SOT23GDS | Q2, Q3 |
| 2 | R | SM0603 | R14, R15 |
| 1 | 0.01 uF | SM0402 | C24 |
| 1 | 1 M | SM0603 | R10 |
| 1 | 10 | SM0402 | R5 |
| 1 | 100R | SM0402 | R2 |
| 1 | 10k | SM0402 | R4 |
| 1 | 10uH | SM0603 | L4 |
| 1 | 12K | SM0402 | R1 |
| 1 | 15nH | SM0603 | L5 |
| 1 | 16.000MHZ | 16Mhz_crystal | X1 |
| 1 | 1k | SM0402 | R6 |
| 1 | 1nF | SM0402 | C9 |
| 1 | 2.2nF | SM0402 | C3 |
| 1 | 220 nF | SM0603 | C26 |
| 1 | 3 k | SM0603 | R13 |
| 1 | 32.768 kHz | 32768kHz_Crystal | X2 |
| 1 | 4.7 uF | SM0402 | C23 |
| 1 | 47nF | SM0402 | C10 |
| 1 | 8 MHz | 8MHzCrystal | X3 |
| 1 | AFE4400 | QFN40-AFE4400-noVias | U2 |
| 1 | ANTENNA Johanson 2450AT18A100E | ANTENNA-JOHANSON-2.45GHZ | U1 |
| 1 | BATTERY | BatteryHolderCR2032 | BT1 |
| 1 | Balun Johanson 2450BM14A0002 | BALUNJOHANSON-2450BM14A0002 | B1 |
| 1 | CAT24M01 | SOIC8-5.3MM | U4 |
| 1 | CONN_2 | PIN_ARRAY_2X1 | P2 |
| 1 | CONN_3X2 | PIN_ARRAY-6X1 | P3 |
| 1 | CONN_5X2 | PIN-5x2-50MIL | P1 |
| 1 | IR | VSBM2943 | D4 |
| 1 | LED | VSBM2943 | D6 |
| 1 | LED | SM0603 | D1 |
| 1 | MMA8452Q | MMA8452Q | U3 |
| 1 | NRF51822 | QFN48+1-0.4MM-SHORTPADS | IC1 |
| 1 | PHOTODIODE | VBPW34FA | D2 |
| 1 | PHOTODIODE | QSB34_Photodiode | D3 |
| 1 | RED | SM1206 | D5 |
| 1 | SWITCH-4 | Switch-B3S | SW1 |
Similar boards
- 2 layers95.2 × 154.5 mm

- 2 layers30 × 30 mm

- 4 layers30 × 50 mm

Wireless logger
bnahill/wireless_logger
A compact wireless inertial logging and processing hardware platform
155 parts7 - 2 layers63.7 × 89.4 mm

Swadge devkit
AEFeinstein/Super-2020-Swadge-HW
The hardware for a hardware badge (Swadge) for Magfest 2020
69 parts6GPL-3.0 - 2 layers100.1 × 100.1 mm

- 4 layers50.5 × 80 mm

- 2 layers310 × 60 mm

- 4 layers60.7 × 27.2 mm

Questions
How big is the Heart rate monitor PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Heart rate monitor use?
232 parts, built around the MMA8452QT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Heart rate monitor KiCad files?
From the jkravanja/heart_rate_monitor repository on GitHub, at the commit this page was made from: the board is hr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Heart rate monitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask jkravanja before reusing the design.