
PCB Prototipo Proyecto Final
FrancoBisciglia/ProyectoFinal_PCB_Prototipo
PCB de la placa prototipo del Sistema de Automatización para Huertas Hidropónicas NFT

Programmable periodic waveform generator based on the ATmega32U4 microcontroller and a DAC
Generator dds is an open-source printed circuit board by kpatrykEIT, from the kpatrykEIT/DDS_generator_ATmega32u4 repository on GitHub. It is a 4-layer board of 102 × 150 mm with 47 parts on 63 nets, routed with 260 tracks and 13 vias.
It is built around the MCP601-I/P, LM358P and TLC7524CN, with the UA741CP among its other parts. Its parts include 10 resistors, 9 connectors, 6 ICs and 4 capacitors. It belongs with the audio and music boards of this library.
Periodic waveform generator project based on Direct Digital Synthesis (DDS). The system utilizes an ATmega32u4 microcontroller and a TLC7524C DAC. Developed low-level firmware in C using direct register manipulation. Designed the PCB in KiCad.
![]() | ![]() |
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3, J4, J5, J6, J7, J8, J9 |
| 8 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 4 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R8, R9, R10 |
| 3 | 1u | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2, C3 |
| 3 | SW_Push | PRZYCISK_2P_5mm:PRZYCISK_2P_5mm | BTN_DOWN1, BTN_MODE1, BTN_UP1 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | AMPLITUDA, OFFSET |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
| 2 | MCP601 | Package_DIP:DIP-8_W7.62mm | U2, U3 |
| 2 | SW_SPDT | PRZELACZNIK_SPDT:PRZELACZNIK_SPDT_5mm | WYJŚCIE, ZAKRES SYGNAŁU |
| 1 | 1n5 | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C4 |
| 1 | Arduino_Micro | Arduino:Arduino_Micro | U1 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_PinHeader_2.00mm:PinHeader_2x02_P2.00mm_Vertical | J2 |
| 1 | LM358P | LM358P:DIP794W53P254L959H508Q8N | IC3 |
| 1 | LOGO | LOGO | G*** |
| 1 | TLC7524CN | TLC7524CN:DIP794W53P254L1930H508Q16N | IC1 |
| 1 | UA741CP | UA741CP:DIP794W53P254L959H508Q8N | IC2 |
| 1 | ~ | PRZETWORNICA_5V:PRZETWORNICA_5V | PRZETWORNICA_-5V1 |
| 1 | ~ | LCD_20x4_I2C:LCD_20x4_I2C_TESTfp | LCD_20x4_I2C1 |

FrancoBisciglia/ProyectoFinal_PCB_Prototipo
PCB de la placa prototipo del Sistema de Automatización para Huertas Hidropónicas NFT





MadsRudolph/62768-energy-system
Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…


saimh-ee/PPG-Heart-Sensor
A custom KiCad PCB developed as an extension of a UBC ENGR 352 Microelectronics II photoplethysmography (PPG) heart-rate sensing project.
It measures 102 × 150 mm and has 4 copper layers, 1.6 mm thick.
47 parts, built around the MCP601-I/P, LM358P, TLC7524CN and UA741CP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kpatrykEIT/DDS_generator_ATmega32u4 repository on GitHub, at the commit this page was made from: the board is generator_dds/generator_dds.kicad_pcb and its schematic generator_dds/generator_dds.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kpatrykEIT before reusing the design.