Skip to the content
PCBKitNew board
MCP601-I/P on a board, in 3D

MCP601-I/P

Microchip Technology

-40℃~+85℃ 1 1pA 1pA 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 86dB Built-in compensation、ESD protection Rail-to-rail output DIP-8 Operational Amplifier ROHS

Extended
DatasheetJLCPCBLCSCmicrochip/MCP601-I/P
Category
Operational Amplifier
Package
DIP-8
Pins
8

Overview

The MCP601-I/P is an operational Amplifier made by Microchip Technology in a DIP-8 package with 8 pins. -40℃~+85℃ 1 1pA 1pA 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 86dB Built-in compensation、ESD protection Rail-to-rail output DIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MCP6546-I_SN, from EasyEDA) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C150777). 11 open-source boards in 7 repositories on GitHub use it.

Symbol

NC8NC5NC1VOUT6VSS4VIN-2VIN+3VDD7
EasyEDA_Cloud:MCP6546-I_SNFrom EasyEDA

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Parameters

16
Common Mode Rejection Ratio(CMRR)
86dB
Features
Built-in compensation, ESD protection
Gain Bandwidth Product
2.8MHz
Ib - Input Bias Current
1pA
Input Offset Current(Ios)
1pA
Input Offset Voltage Drift(Vos TC)
2.5uV/℃
Input Voltage Noise Density
29nV/√Hz@1kHz
Maximum Power Supply Range (Vdd-Vss)
6V
Number of Channels
1
Operating Temperature
-40℃~+85℃
Output Current
22mA
Quiescent Current
230uA
Rail to Rail
Rail-to-rail output
Single supply
2.7V~6V
Slew Rate
2.3V/us
Vos - Input Offset Voltage
700uV

Order codes

1

Pinout

8
The pins of the MCP601-I/P
PinNameType
1NCUnspecified
2VIN-Unspecified
3VIN+Unspecified
4VSSUnspecified
5NCUnspecified
6VOUTUnspecified
7VDDUnspecified
8NCUnspecified

Open-source boards using it

All 11
  • 2 layers35 × 14 mmDongle, the printed circuit board in 3D

    Dongle

    iTeleTram/dongle_hw

    USB to DCC dongle hardware schematics for KiCad

    39 partsApache-2.0
  • 4 layers102 × 150 mmGenerator dds, the printed circuit board in 3D

    Generator dds

    kpatrykEIT/DDS_generator_ATmega32u4

    Programmable periodic waveform generator based on the ATmega32U4 microcontroller and a DAC

    47 parts
  • 2 layers202.2 × 131 mmNew system, the printed circuit board in 3D

    New system

    MadsRudolph/62768-energy-system

    Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…

    131 parts
  • 2 layers117 × 31 mmPPG heart rate sensor, the printed circuit board in 3D

    PPG heart rate sensor

    saimh-ee/PPG-Heart-Sensor

    A custom KiCad PCB developed as an extension of a UBC ENGR 352 Microelectronics II photoplethysmography (PPG) heart-rate sensing project.

    44 parts
  • 2 layers110.5 × 38.1 mmDelSol Preamp, the printed circuit board in 3D

    DelSol Preamp

    dzavalishin/hardware

    Misc smart house hardware

    79 parts3
  • 2 layers104 × 104 mmC2000 feedback, the printed circuit board in 3D

    C2000 feedback

    MadsRudolph/62768-energy-system

    Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…

    47 parts
  • 2 layers104 × 104 mmFeedback circuit, the printed circuit board in 3D

    Feedback circuit

    MadsRudolph/62768-energy-system

    Team project for 62768 Electrical Energy Systems (DTU, June 2026, 3-week course). We design and build a complete electrical energy system per the course requirement spec (Kravspecifikation), from idea to a working…

    10 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/microchip/MCP601-I/P" title="MCP601-I/P in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/microchip/MCP601-I/P.jpg" alt="MCP601-I/P" width="1200" height="900">
A picture that opens the part, for a README
[![MCP601-I/P](https://pcbkit.io/embed/parts/microchip/MCP601-I/P.jpg?size=s)](https://pcbkit.io/parts/microchip/MCP601-I/P)

Questions

Is there a KiCad symbol and footprint for the MCP601-I/P?

Yes. The symbol is EasyEDA_Cloud:MCP6546-I_SN and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP601-I/P?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP601-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP601-I/P?

JLCPCB lists it as part C150777, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP601-I/P?

Parts like it in the library: the LM358N by HGSEMI, the LM358N/NOPB by Texas Instruments, the LM741CN/NOPB by Texas Instruments and the NE5532P by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP601-I/P?

11 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8