2 layers76.4 × 63.3 mm
InfraRedGelUniversalDispenser
abdontroche/InfraRed_Gel_Universal_Dispenser
This project pretends to be a open source device that could help people fighting against the COVID-19.
20 parts5CC0-1.0
LM358P
SlkorExtended
-1.5V~18V 0℃~+70℃ 1MHz 2 2mV 3V~36V 3nA 40mA 45nA 500uA 85dB Built-in compensation DIP-8 Operational Amplifier ROHS
- Part id
- slkor/LM358P
- Category
- Operational Amplifier
- Package
- DIP-8
- Pins
- 8
- In stock
- 153 at JLCPCB (C5330384)
- Used on
- 20 open-source boards
Overview
The LM358P is an operational Amplifier made by Slkor in a DIP-8 package with 8 pins. -1.5V~18V 0℃~+70℃ 1MHz 2 2mV 3V~36V 3nA 40mA 45nA 500uA 85dB Built-in compensation DIP-8 Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Operational:LM358, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 153 are in stock at JLCPCB (part C5330384). 20 open-source boards in 19 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
10- Supply, least
- 3 V · VCC, single-supply recommended operating min · p. 1
- Supply, most
- 36 V · VCC, single-supply recommended operating max · p. 1
- Supply, least
- 1.5 V · VCC, dual-supply rail magnitude min (±1.5 V) · p. 1
- Supply, most
- 18 V · VCC, dual-supply rail magnitude max (±18 V) · p. 1
- Supply, absolute maximum
- 36 V · VCC, single-supply absolute max · p. 3
- Supply, absolute maximum
- 18 V · VCC, dual-supply absolute max rail magnitude (±18 V) · p. 3
- Works from
- 0 °C · TA, operating ambient min · p. 3
- Works up to
- 70 °C · TA, operating ambient max · p. 3
- Takes working
- 500 µA · ICC, typical, VCC=5 V, RL=∞, entire temperature range · p. 3
- Takes at most
- 2 mA · ICC, max, VCC=30 V, RL=∞, entire temperature range · p. 3
What it is and has
4- Amplifiers
- 2 independent, high-gain amplifiers · p. 1
- DC voltage gain
- approximately 100 dB · p. 1
- Unity-gain bandwidth
- approximately 1 MHz · p. 1
- Package options
- DIP8, SOP8 · p. 1
Specifications
26| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 电源电压 VCC | TA=25°C; 单电源 | max 36 V | 3 |
| 电源电压 VCC | TA=25°C; 双电源; ±18 V | min -18 · max 18 V | 3 |
| 差模输入电压 VIDR | TA=25°C | max 36 V | 3 |
| 共模输入电压 VIN | TA=25°C | min -0.3 · max 36 V | 3 |
| 输入电流 IIN | TA=25°C | max 50 mA | 3 |
| 功耗 PD | TA=25°C; DIP封装 | max 830 mW | 3 |
| 工作环境温度 TA | min 0 · max 70 °C | 3 | |
| 贮存温度 Tstg | min -65 · max 150 °C | 3 | |
| 输入失调电压 VIO | Ta=25℃; VCC=12V | typ 2 · max 5 mV | 3 |
| 输入失调电流 IIO | Ta=25℃，IIN(+)或IIN(-) ，VCM=0V; VCC=12V | typ 3 · max 30 nA | 3 |
| 输入偏置电流 IBIAS | Ta=25℃，IIN(+)或IIN(-) ，VCM=0V; VCC=12V | typ 45 · max 150 nA | 3 |
| 输入共模电压范围 VICR | Ta=25℃，Vcc =30V; upper bound Vcc-1.5 V | min 0 V | 3 |
| 电源电流 ICC | 在整个温度范围上,RL= ∞,Vcc=5V | typ 0.5 · max 1.2 mA | 3 |
| 电源电流 ICC | 在整个温度范围上,RL= ∞,Vcc=30V | typ 1 · max 2 mA | 3 |
| 大信号电压增益 GV | Vcc=15V，Ta=25℃， RL≥2kΩ，Vo=1 ~11V | min 50 · typ 100 V/mV | 3 |
| 共模抑制比 CMRR | DC ，Ta=25℃， VCM=0~ Vcc-1.5V; VCC=12V | min 70 · typ 85 dB | 3 |
| 电源纹波抑制比 PSRR | DC，Ta=25℃， Vcc=5~30V | min 65 · typ 100 dB | 3 |
| 通道分离度 CS | Ta=25℃， f=1k~20kHz; VCC=12V | typ 120 dB | 3 |
| 短路电流 ISC | Vcc=15V ， Ta=25℃ | typ 40 · max 60 mA | 3 |
| 输出源电流 ISOURCE | VIN(+)=1V，VIN(-)=0V ， Vcc=15V，Vo=2V; unit reproduced as printed | min 50 · typ 100 V/mV | 3 |
| 输出陷电流 ISINK | VIN(-)=1V,VIN(+)=0V, Vcc=15V ，Vo=2V; TA=0~85°C | min 10 · typ 20 mA | 3 |
| 输出陷电流 ISINK | VIN(-)=1V,VIN(+)=0V，Vcc=15V，Vo=200mV; TA=0~85°C | min 12 · typ 50 uA | 3 |
| 输出高电平摆幅 VOH | Vcc =30V ，RL=2K; TA=0~85°C | min 26 V | 3 |
| 输出高电平摆幅 VOH | Vcc =30V ，RL=10K; TA=0~85°C | min 27 · typ 29 V | 3 |
| 输出低电平摆幅 VOL | Vcc =15V ，RL≥10K; TA=0~85°C; first printed row | typ 5 · max 20 mV | 3 |
| 输出低电平摆幅 VOL | Vcc =15V ，RL≥10K; TA=0~85°C; second printed row | typ 5 · max 20 mV | 3 |
Pins, by the datasheet
8- 1 输出 1
- Amplifier 1 output. · p. 2
- 2 输入 1-
- Amplifier 1 inverting input. · p. 2
- 3 输入 1+
- Amplifier 1 noninverting input. · p. 2
- 4 GND
- Ground. · p. 2
- 5 输入 2+
- Amplifier 2 noninverting input. · p. 2
- 6 输入 2-
- Amplifier 2 inverting input. · p. 2
- 7 输出 2
- Amplifier 2 output. · p. 2
- 8 VCC
- Supply voltage. · p. 2
Ordering codes, by the datasheet
2- LM358P
- DIP-8 · DIP package · p. 2
- LM358S
- SOP-8 · SOP package · p. 2
- 4 layers56 × 51 mm
Psu controller
igorzab-stud/wanptek_encoder
Digital front-panel mod for Wanptek DC power supplies — replaces analog potentiometers with dual rotary encoders, MCP4725 DACs, and an OLED display.
11 parts3MIT - 4 layers186.9 × 129.8 mm
BLDC 4
ansh1113/e-bike-conversion-kit
A 4-layer PCB-based e-bike conversion kit featuring an STM32-based VESC ESC, power management circuits, wireless throttle, GSM, GPS, and more.
179 parts1 - 2 layers81.3 × 85.7 mm
- 2 layers94.1 × 121.9 mm
SCH PowerSupply
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
47 parts1 - 2 layers80 × 104.5 mm
EKG generator
asliwaa/ECG-Simulator
A custom hardware ECG/EKG simulator built with the XIAO ESP32-C6 and an MCP4725 DAC, designed to generate physiologically accurate heart signals.
18 parts - 2 layers100 × 100 mm
- 2 layers86.5 × 57.1 mm
CONTROL PowerSupply
IKGB105/PCBs-POWER-ELECTRONICS
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
27 parts
Parts like it
8
LM358N/NOPB
PDIP-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 1MHz 1mA 2 2mV 3V~32V 40mA 45nA 5nA 65dB 7uV/℃ Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358N(XBLW)
DIP-8-12V~-1.5V、1.5V~12V 0℃~+70℃ 2 3V~24V 3nA 40mA 45nA 500uA 5mV 600V/ms 7uV/℃ 90dB DIP-8 Operational Amplifier ROHSXBLWOperational AmplifierUA741CP
PDIP-8-15V~15V -5V~15V 0℃~+70℃ 1 2.8mA 200nA 40mA 500V/ms 500nA 6mV 90dB Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLM358AN
DIP-8-18V~18V -40℃~+85℃ 2 20nA 2nA 3mV 500uA 50mA 5V~36V 700V/ms 700kHz 7uV/℃ 80dB DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierCA3140EZ
DIP-8-18V~18V -55℃~+125℃ 0.5pA 1 10pA 4.5MHz 40mA 40nV/√Hz@1kHz 4V~36V 4mA 5mV 8uV/℃ 90dB 9V/us Built-in compensation DIP-8 Operational Amplifier ROHSRenesas ElectronicsOperational AmplifierMC1458P
PDIP-8-15V~15V 0℃~+70℃ 150nV/√Hz@1kHz 1MHz 1mV 2 200nA 3.4mA 40mA 500V/ms 70dB 80nA Built-in compensation PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierCA3140AN
DIP-8-10℃~+85℃ -15V~15V 1 4.5MHz 40nV/√Hz@1kHz 45mA 9V/us DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierLM358GN
DIP-8-22.5V~22.5V -40℃~+125℃ 15dB 1mA 2 20nA 2nA 50mA 5V~40V 700V/ms 700kHz 7mV 9uV/℃ Built-in compensation DIP-8 Operational Amplifier ROHSHTC Korea TAEJIN TechOperational Amplifier
Questions
Is there a KiCad symbol and footprint for the LM358P?
Yes. The symbol is Amplifier_Operational:LM358 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM358P?
DIP-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM358P datasheet?
Slkor publishes it: the Datasheet link on this page opens it.
Where can I order the LM358P?
JLCPCB lists it as part C5330384, with 153 in stock; the sellers' links on this page open their listings.
What can replace the LM358P?
Parts like it in the library: the LM358N/NOPB by Texas Instruments, the LM358N(XBLW) by XBLW, the UA741CP by Texas Instruments and the LM358AN by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM358P?
20 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.