2 layers71.5 × 55.5 mm
Phothoresistor Gel Universal Dispenser
abdontroche/InfraRed_Gel_Universal_Dispenser
This project pretends to be a open source device that could help people fighting against the COVID-19.
16 parts5CC0-1.0
2 layers76.4 × 63.3 mm
InfraRedGelUniversalDispenser
abdontroche/InfraRed_Gel_Universal_Dispenser5This project pretends to be a open source device that could help people fighting against the COVID-19.
- Size
- 76.4 × 63.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 11
- Pads
- 76
- Tracks, vias
- 126, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Mar 2020
- Updated
- 9 Nov 2021
Overview
InfraRedGelUniversalDispenser is an open-source printed circuit board by abdontroche, from the abdontroche/InfraRed_Gel_Universal_Dispenser repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 76.4 × 63.3 mm with 20 parts on 11 nets, routed with 126 tracks and 0 vias.
It is built around the LM358P and TIP120. Its parts include 6 diodes, 5 resistors, 2 connectors, 1 IC and 1 transistor.
Main components
2
LM358P
DIP-8-1.5V~18V 0℃~+70℃ 1MHz 2 2mV 3V~36V 3nA 40mA 45nA 500uA 85dB Built-in compensation DIP-8 Operational Amplifier ROHSSlkorOperational Amplifier
TIP120
TO-220-55℃~+150℃ 200uA 2V@3A,12mA 2W 5A 5V 60V NPN TO-220 Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Darlington Transistors
README
README.md================================= This project pretends to be a open source device that could help people fighting against the COVID-19.
Who are we?
Estimados Miembros: Este grupo está conformado por alumnos, profesores y egresados de la FP-UNA y tiene por objetivo pensar, formular y realizar acciones concretas ante esta situación adversa que vivimos en el país con respecto al coronavirus COVID-19. Iniciamos con gente del área de electrónica e informática pero no estamos cerrados de ninguna manera. El trabajo es voluntario y sin fines de lucro. A hombros de gigantes enfrentaremos mejor las adversidades.
Dear Members: This group is made up of students, professors and graduates of the FP-UNA and its objective is to think, formulate and carry out concrete actions in the face of this adverse situation that we are experiencing in the country with respect to the COVID-19 coronavirus. We started with people from the electronics and computing area but we are not closed in any way. The work is voluntary and non-profit. On the shoulders of giants we will better face adversities.
Team FP-UNA/COVID
What we want to achieve?
The board is based on the website called www.electroschematics.com and the project is called Automatic soap dispenser IR proximity sensor.
We want to use this board and use to dispense gel alcohol adapting it on differents bottles.
What we will find inside this repository?
Fist to all we will find the board.
The Board was designed using the software KiCad 5.1.2
The components are chosen by the existence on the Paraguay electronics componentes market.
The schmematic
The board
Bill Of Materials
This is the file of the BOM
The 3D models
You will find the board 3D model in the STP format in order you can choose the software you want to develope the mechanism with.
Desing the mechanism using Fusion 360
Electronic board
[Dispenser mecanism](InfraRedGelUniversalDispenser/CustomizedSolenoid v5.step)
Gel alcohol bottle or soap bottle dispenser
Fisrt assembly
Second assembly
File of the prototipe "InfraRedGelUniversalDispenserDevice v17.step"
This is another version of the board
The schmematic
The board
Bill Of Materials
The 3D models
You will find the board 3D model in the STP format in order you can choose the software you want to develope the mechanism with.
Desing the mechanism using Fusion 360
Electronic board
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N4007 | digikey-footprints:DO-41 | D5, D6 |
| 2 | 330 | Resistors:AXIAL-0.3 | R1, R3 |
| 2 | RESISTORAXIAL-0.3 | Resistors:AXIAL-0.3 | R4, R5 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3386F_Vertical | RV1 |
| 1 | 33K | Resistors:AXIAL-0.3 | R2 |
| 1 | GREEN-LED | LED:LED_5MM-KIT | D4 |
| 1 | IR-LED | LED:LED_5MM-KIT | D2 |
| 1 | LM358P | digikey-footprints:DIP-8_W7.62mm | U1 |
| 1 | POWER | digikey-footprints:Term_Block_1x2_P5mm | J2 |
| 1 | PhotoDiode | LED_THT:LED_D5.0mm_IRGrey | D1 |
| 1 | RED-LED | LED:LED_5MM-KIT | D3 |
| 1 | SOLENOID | digikey-footprints:Term_Block_1x2_P5mm | J1 |
| 1 | TIP120 | digikey-footprints:TO-220-3 | Q1 |
The 16 most common of 20 parts.
More from abdontroche/InfraRed_Gel_Universal_Dispenser
1Similar boards
- 4 layers56 × 51 mm
Psu controller
igorzab-stud/wanptek_encoder
Digital front-panel mod for Wanptek DC power supplies — replaces analog potentiometers with dual rotary encoders, MCP4725 DACs, and an OLED display.
11 parts3MIT - 4 layers186.9 × 129.8 mm
BLDC 4
ansh1113/e-bike-conversion-kit
A 4-layer PCB-based e-bike conversion kit featuring an STM32-based VESC ESC, power management circuits, wireless throttle, GSM, GPS, and more.
179 parts1 - 2 layers81.3 × 85.7 mm
- 2 layers94.1 × 121.9 mm
SCH PowerSupply
UAA-F14/PCBs-Design
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
47 parts1 - 2 layers80 × 104.5 mm
EKG generator
asliwaa/ECG-Simulator
A custom hardware ECG/EKG simulator built with the XIAO ESP32-C6 and an MCP4725 DAC, designed to generate physiologically accurate heart signals.
18 parts - 2 layers100 × 100 mm
- 2 layers86.5 × 57.1 mm
CONTROL PowerSupply
IKGB105/PCBs-POWER-ELECTRONICS
Power electronics PCB coursework — SCR controller, buck converter, Class D amplifier, DC-AC inverter, and a protected power supply Resources
27 parts - 2 layers99.5 × 85 mm
Questions
How big is the InfraRedGelUniversalDispenser PCB?
It measures 76.4 × 63.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the InfraRedGelUniversalDispenser use?
20 parts, built around the LM358P and TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InfraRedGelUniversalDispenser KiCad files?
From the abdontroche/InfraRed_Gel_Universal_Dispenser repository on GitHub, at the commit this page was made from: the board is InfraRedGelUniversalDispenser/InfraRedGelUniversalDispenser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the InfraRedGelUniversalDispenser design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).