2 layers150 × 100 mm
2 layers
Full1
koson/KicadProject- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 50
- Pads
- 78
- Tracks, vias
- 101, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
Full1 is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board with 9 parts on 50 nets, routed with 101 tracks and 0 vias.
It is built around the PIC18F4550-I/P and ESP8266EX. Its parts include 2 capacitors, 2 resistors, 2 ICs, 1 transistor and 1 crystal. It belongs with the ESP8266 and PIC boards of this library.
Main components
2
PIC18F4550-I/P
PDIP-40-40℃~+85℃ 10bit 256Byte 2KB 32KB 35 4.2V~5.5V 48MHz 8 Bit Built-in FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1, C2 |
| 1 | 1.2kΩ | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2 |
| 1 | 10kΩ | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | 20Mhz | Crystals:HC-49V | Y1 |
| 1 | 2N3904 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | Q1 |
| 1 | ESP-8266 | Pin_Headers:Pin_Header_Straight_2x04 | U2 |
| 1 | LCD-20X4 | ThinkerForge:LCD-20x4 | DP1 |
| 1 | PIC18F4550 | Housings_DIP:DIP-40_W15.24mm | U1 |
Questions
What parts does the Full1 use?
9 parts, built around the PIC18F4550-I/P and ESP8266EX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Full1 KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is Sensor Sever FYP/Full1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Full1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.
More from koson/KicadProject
12- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers
- 2 layers190.5 × 88.9 mm
- 2 layers75 × 50 mm
- 2 layers100 × 100 mm
- 2 layers95 × 60 mm
- 2 layers146.1 × 69.9 mm
- 2 layers112.5 × 60 mm
- 2 layers88.9 × 48.9 mm
- 2 layers62.2 × 55.9 mm
Similar boards
- 2 layers
- 2 layers
- 2 layers88.9 × 98.5 mm
- 2 layers
- 2 layers
Projeto modificado
luispaulomr/alr3000z_firmware
Firmware for ALR3000z (development board based on PIC18F4550).
68 parts - 2 layers75 × 130 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers32 × 24 mm
