

Trial1
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 163
- Pads
- 529
- Tracks, vias
- 1,252, 132
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
Trial1 is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board with 123 parts on 163 nets, routed with 1,252 tracks and 132 vias.
It is built around the LM324, MCP4922-E/P and CD4051, with the 25LC256-I/P, LM7805 and LM7809T among its other parts. Its parts include 34 capacitors, 32 resistors, 19 diodes, 10 ICs and 8 connectors. It belongs with the STM32 boards of this library.
Main components
7LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational AmplifierMCP4922-E/P
PDIP-14-40℃~+125℃ 0.25LSB、4LSB 12 2 2.7V~5.5V 350uA 4.5us Power-on reset、Power-down mode、Programmable gain SPI Voltage Buffer PDIP-14 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)CD4051
TSSOP-16-40℃~+85℃ 115Ω 15ns 280ns 3V~9V 8:1 TSSOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers25LC256-I/P
DIP-8-40℃~+85℃ 1,000,000 cycles 10MHz 2.5V~5.5V 200 Years 256Kbit 5ms Hardware write protection function、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SPI DIP-8 EEPROM ROHSMicrochip TechnologyEEPROMLM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM7809T
TO-220-20℃~+80℃@(Ta) 1 1A 35V 56dB@(120Hz) 57uV 9V Fixed Positive Short Circuit Protection、Thermal shutdown TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHGSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsHMC5883L
LGA-16_L3.0-W3.0-P0.50LPCC-16(3x3) New Arrivals ROHSHoneywellUncategorised
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Custom Footprint:Cap_UnPol_P3 | C1, C2, C4, C5, C6, C16, C19, C20, C24, C25, C28, C29, C30, C31, C32, C33 +2 |
| 12 | LED_B | Custom Footprint:LED_5mm | LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15 |
| 10 | 150Ω | Custom Footprint:Resistor-0.25W | R8, R9, R10, R11, R12, R13, R14, R21, R24, R29 |
| 9 | 10kΩ | Custom Footprint:Resistor-0.25W | R5, R6, R7, R19, R20, R22, R26, R27, R31 |
| 7 | 2N3904 | Custom Footprint:TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7 |
| 6 | 100uF | Custom Footprint:Cap_Pol_Radial_D10_P3 | C3, C17, C18, C26, C27, C34 |
| 6 | 10uF | Custom Footprint:Cap_Pol_Radial_D8_P2 | C9, C10, C11, C21, C22, C23 |
| 5 | 3.3kΩ | Custom Footprint:Resistor-0.25W | R3, R15, R16, R17, R18 |
| 4 | 47uF | Custom Footprint:Cap_Pol_Radial_D8_P2 | C12, C13, C14, C15 |
| 4 | 7Segment_CC | Custom Footprint:7Seg_small | SEG1, SEG2, SEG3, SEG4 |
| 3 | 1N914 | Custom Footprint:1N4148 | D1, D2, D3 |
| 3 | LED_R | Custom Footprint:LED_5mm | LED1, LED2, LED3 |
| 2 | 100Ω | Custom Footprint:Resistor-0.25W | R23, R28 |
| 2 | 18kΩ | Custom Footprint:Resistor-0.25W | R25, R30 |
| 2 | 270Ω | Custom Footprint:Resistor-0.25W | R1, R2 |
| 2 | CD4051 | Custom Footprint:IC_PDIP_16pin | U9, U10 |
| 2 | NSL-32 | Custom Footprint:NSL32 | OPTO1, OPTO2 |
| 2 | SW_PUSH | Custom Footprint:Round_Button | SW1, SW2 |
| 1 | 10kΩ | Custom Footprint:Potentiometer_Bourns_3386 | POT2 |
| 1 | 180Ω | Custom Footprint:Resistor-0.25W | R4 |
| 1 | 1kΩ | Custom Footprint:Potentiometer_Large | POT1 |
| 1 | 25LC256 | Custom Footprint:IC_PDIP_8pin | U1 |
| 1 | 390Ω | Custom Footprint:Resistor-0.25W | R32 |
| 1 | 74LS164 | Custom Footprint:IC_PDIP_14pin | U4 |
| 1 | AUDIO_IN | Custom Footprint:Audio_3.5mm_Socket | J6 |
| 1 | AUDIO_OUT | Custom Footprint:Audio_3.5mm_Socket | J7 |
| 1 | BH1750 | Custom Footprint:Pin_Header_Straight_1x05 | J4 |
| 1 | DB9 | Custom Footprint:RS232_DB9_Female_PCB_Mount | J1 |
| 1 | GND | Custom Footprint:Pin_Header_Straight_1x02 | J3 |
| 1 | HMC5883L | Custom Footprint:Pin_Header_Straight_1x05 | J5 |
| 1 | LCD2004 | Custom Footprint:LCD_2004 | LCD1 |
| 1 | LED_G | Custom Footprint:LED_5mm | LED16 |
| 1 | LM324 | Custom Footprint:IC_PDIP_14pin | U5 |
| 1 | LM7805 | Custom Footprint:TO-220_Neutral123_Vertical | U8 |
| 1 | LM7809 | Custom Footprint:TO-220_Neutral123_Vertical | U6 |
| 1 | MCP4922 | Custom Footprint:IC_PDIP_14pin | U2 |
| 1 | POWER | Custom Footprint:Power_Socket_2.1mm | J8 |
| 1 | RTC_CALIB | Custom Footprint:Pin_Header_Straight_1x02 | J2 |
| 1 | Rotary_Encoder | Custom Footprint:Rotary_Encoder | RE1 |
| 1 | SP3232ECP-L | Custom Footprint:IC_PDIP_18pin | U3 |
| 1 | STM32L053R8T6_Nucleo | Custom Footprint:STM32L053R8T6_Nucleo | BOARD1 |
| 1 | TC962 | Custom Footprint:IC_PDIP_8pin | U7 |
More from koson/KicadProject
12- 2 layers150 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers190.5 × 88.9 mm

- 2 layers75 × 50 mm

- 2 layers100 × 100 mm

- 2 layers95 × 60 mm

- 2 layers146.1 × 69.9 mm

- 2 layers112.5 × 60 mm

- 2 layers88.9 × 48.9 mm

- 2 layers62.2 × 55.9 mm

- 2 layers47.6 × 43.8 mm

Similar boards
- 2 layers126 × 59.5 mm

VFO BFO Si5351
loscorpione/VFO-BFO-HF-ESP32-Si5351
VFO & BFO con Si 5351 gestito da ESP32 devkit V1 per la gamma di frequenze HF, da 1 a 30 MHZ
34 parts3 - 2 layers190 × 109 mm

IOB v3.2.1
ADFTech/xtec-uc-ip-main-pcb
KiCad hardware repo for the UC-IP main PCB (currently: IOB board family). This README documents the review-and-release process used to get a schematic/PCB change from an engineer's desk to fabrication.
538 parts - 4 layers90.8 × 47 mm

Pickit
ananevego/ProjectFreeCad
Конвертер библиотечных footprint-файлов KiCad .kicadmod в самостоятельные библиотеки FreePCB2 .fpl. Написан на Python 3.10+, внешние зависимости не нужны.
122 parts - 2 layers130 × 105 mm

- 4 layers90 × 47 mm

- 4 layers43.9 × 33.4 mm

- 2 layers60.8 × 99.9 mm

- 2 layers156.2 × 141 mm

MCU MotherBoard
bc-kim/PCB_KiCAD
Tips Footprint of the resisotor and capacitor should be assigned aforetime because assigning those are comfusing when lots of reisistor and capacitors are used. 3. Reference: https://wikidocs.net/103412
49 parts
Questions
What parts does the Trial1 use?
123 parts, built around the LM324, MCP4922-E/P, CD4051 and 25LC256-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Trial1 KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is ARM/STM32L053R8T6/Project Trial 1/Trial1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Trial1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.