

DC Electronic Load Mini
- Size
- 75 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 109
- Nets
- 105
- Pads
- 349
- Tracks, vias
- 620, 43
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2022
- Updated
- 5 Dec 2019
Overview
DC Electronic Load Mini is an open-source printed circuit board by koson, from the koson/KicadProject repository on GitHub. It is a 2-layer board of 75 × 50 mm with 109 parts on 105 nets, routed with 620 tracks and 43 vias.
It is built around the STM32F373C8T6, LMP2022MM and L7805, with the LD1117 among its other parts. Its parts include 43 resistors, 35 capacitors, 12 connectors, 11 ICs and 1 diode. It belongs with the power boards and the STM32 boards of this library.
Main components
4STM32F373C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 12bit、16bit 16KB 2V~3.6V 32 Bit 36 64KB 72MHz ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)LMP2022MM
VSSOP-8-0.65mm-40℃~+125℃ 1.1mA 11nV/√Hz@0.1kHz 139dB 2 2.2V~5.5V 2.6V/us 25pA 400nV 48pA 4nV/℃ 50mA 5MHz EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-rail output VSSOP-8-0.65mm Precision Op Amps ROHSTexas InstrumentsLow Noise Amplifiers (LNA) - RFL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLD1117
UncategorisedSTMicroelectronics
Parts
109| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C2, C4, C5, C10, C12, C13, C14, C15, C18, C21, C22, C23, C24, C25, C26, C27 +3 |
| 16 | 0Ω1 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R14, R15, R17, R18, R20, R21, R23, R24, R26, R27, R29, R30, R32, R33, R35, R36 |
| 9 | 100Ω | Resistors_SMD:R_0603_HandSoldering | R5, R13, R16, R19, R22, R25, R28, R31, R34 |
| 9 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C28, C29, C30, C31, C32, C33, C34, C35, C36 |
| 7 | 10uF | Capacitors_SMD:C_0603_HandSoldering | C1, C3, C9, C11, C16, C17, C20 |
| 6 | 10kΩ | Resistors_SMD:R_0603_HandSoldering | R3, R8, R9, R10, R11, R12 |
| 5 | LMP2022 | Housings_SSOP:VSSOP-8_3.0x3.0mm_Pitch0.65mm | U6, U7, U8, U9, U10 |
| 4 | 0Ω02 | Resistors_SMD:R_0603_HandSoldering | R37, R38, R39, R40 |
| 2 | MCP3425 | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U11, U12 |
| 1 | 100Ω | CustomFootprint:Potentiometer_Bourns_3386 | POT5 |
| 1 | 10kΩ | CustomFootprint:Potentiometer_Bourns_3386 | POT3 |
| 1 | 18kΩ | Resistors_SMD:R_0603_HandSoldering | R41 |
| 1 | 1N914 | Diodes_THT:D_A-405_P12.70mm_Horizontal | D1 |
| 1 | 1k8Ω | Resistors_SMD:R_0603_HandSoldering | R2 |
| 1 | 200Ω | CustomFootprint:Potentiometer_Bourns_3386 | POT4 |
| 1 | 220Ω | Resistors_SMD:R_0603_HandSoldering | R7 |
| 1 | 29kΩ | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | 500Ω | CustomFootprint:Potentiometer_Bourns_3386 | POT1 |
| 1 | 50kΩ | CustomFootprint:Pin_Header_Straight_1x03 | POT2 |
| 1 | 50Ω | CustomFootprint:Resistor-0.25W | R43 |
| 1 | 6k2Ω | Resistors_SMD:R_0603_HandSoldering | R4 |
| 1 | 820Ω | Resistors_SMD:R_0603_HandSoldering | R42 |
| 1 | 910Ω | Resistors_SMD:R_0603_HandSoldering | R6 |
| 1 | ExternalVset | CustomFootprint:Pin_Header_Straight_1x02 | J3 |
| 1 | L7805 | TO_SOT_Packages_THT:TO-220-3_Vertical | U1 |
| 1 | LCD1602 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | LCD1 |
| 1 | LD1117 | TO_SOT_Packages_THT:TO-220-3_Vertical | U2 |
| 1 | MOSFET 1 | CustomFootprint:Pin_Header_Straight_1x03 | J5 |
| 1 | MOSFET 2 | CustomFootprint:Pin_Header_Straight_1x03 | J6 |
| 1 | MOSFET 3 | CustomFootprint:Pin_Header_Straight_1x03 | J7 |
| 1 | MOSFET 4 | CustomFootprint:Pin_Header_Straight_1x03 | J8 |
| 1 | MOSFET 5 | CustomFootprint:Pin_Header_Straight_1x03 | J9 |
| 1 | MOSFET 6 | CustomFootprint:Pin_Header_Straight_1x03 | J10 |
| 1 | MOSFET 7 | CustomFootprint:Pin_Header_Straight_1x03 | J11 |
| 1 | MOSFET 8 | CustomFootprint:Pin_Header_Straight_1x03 | J12 |
| 1 | Power | CustomFootprint:Power_Socket_2.1mm | J1 |
| 1 | ST-LINK | CustomFootprint:Pin_Header_Straight_1x06 | J4 |
| 1 | STM32F373C8T6 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U5 |
| 1 | SW_SPDT | CustomFootprint:Pin_Header_Straight_1x03 | SW1 |
| 1 | TC962 | CustomFootprint:IC_PDIP_8pin | U3 |
| 1 | Vin | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | J2 |
More from koson/KicadProject
12- 2 layers150 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers

- 2 layers190.5 × 88.9 mm

- 2 layers100 × 100 mm

- 2 layers95 × 60 mm

- 2 layers146.1 × 69.9 mm

- 2 layers112.5 × 60 mm

- 2 layers88.9 × 48.9 mm

- 2 layers62.2 × 55.9 mm

- 2 layers47.6 × 43.8 mm

Similar boards
- 2 layers49.1 × 48.4 mm

- 2 layers156.8 × 67.3 mm

YM2151 STM32 VGM
AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151
52 parts81AGPL-3.0 - 2 layers42 × 24 mm

- 4 layers40 × 47 mm

- 4 layers40 × 40 mm

- 2 layers80 × 49 mm

Obd2
kevinkrieger/CAN
CAN repository containing my CAN project, kicad files, firmware, datasheets, references, etc.
64 parts3 - 2 layers60 × 50 mm

Theia
loldavid6/Theia
An easy, cheap and open source way to add IoT to a light switch.
34 parts2CC-BY-SA-4.0 - 2 layers49.5 × 56.4 mm

Toadstool Mega328
CrashBangProto/Toadstool-Mega328
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.
28 parts1GPL-3.0
Questions
How big is the DC Electronic Load Mini PCB?
It measures 75 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DC Electronic Load Mini use?
109 parts, built around the STM32F373C8T6, LMP2022MM, L7805 and LD1117. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC Electronic Load Mini KiCad files?
From the koson/KicadProject repository on GitHub, at the commit this page was made from: the board is DC Electronics Load Mini/DC Electronic Load Mini/DC Electronic Load Mini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC Electronic Load Mini design in my own project?
Its repository states no licence, so its author keeps all rights: ask koson before reusing the design.