
DI Lambda UNO top
koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

Schematics for AVR-based DI-Lambda DITOS and UNO v1
DI Lambda UNO panel LED is an open-source printed circuit board by koi-science, from the koi-science/DI-Lambda-schematics-avr repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 33.2 × 26.5 mm with 9 parts on 8 nets, routed with 50 tracks and 4 vias.
It is built around the 24LC024/P. Its parts include 2 resistors, 2 diodes, 1 capacitor, 1 IC and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF 25v | Capacitors_SMD:C_0603 | C601 |
| 1 | 24LC02 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U601 |
| 1 | 4.75K | Resistor_SMD:R_0603_1608Metric | R601 |
| 1 | 470R | Resistors_SMD:R_0805 | R602 |
| 1 | Conn_01X06 | Spring-contact-connector-2:Contact-2.5x6 | J601 |
| 1 | LED | LEDs:LED_0603 | D602 |
| 1 | LED | LED-single-layer:LED_D5.0mm | D601 |
| 1 | Mounting_Hole | DI-Lambda-module-tabs:Tab_LED | MK601 |
| 1 | WRITE | TestPoint:TestPoint_Pad_D2.5mm | W601 |

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1

koi-science/DI-Lambda-schematics-avr
Schematics for AVR-based DI-Lambda DITOS and UNO v1



embeddedboys/hdmi2rgb_adapter
hdmi2rgb_adapter is a simple HDMI to RGB deserializer based on TFP401 (TI)




gmarcus1018/Portfolio_Web
Personal portfolio site built with Astro. Static site, deploys to Cloudflare Pages.

joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
It measures 33.2 × 26.5 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the 24LC024/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the koi-science/DI-Lambda-schematics-avr repository on GitHub, at the commit this page was made from: the board is DI-Lambda-UNO/DI-Lambda-UNO-panel-LED/DI-Lambda-UNO-panel-LED.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).