Skip to the content
2 layers19 × 13.8 mmIotrain, the printed circuit board in 3D
Size
19 × 13.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
73
Nets
64
Pads
242
Tracks, vias
226, 21
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Oct 2024
Updated
10 Mar 2025

Overview

Iotrain is an open-source printed circuit board by klaus-liebler, from the klaus-liebler/iotrain repository on GitHub, published under the MIT licence. It is a 2-layer board of 19 × 13.8 mm with 73 parts on 64 nets, routed with 226 tracks and 21 vias.

It is built around the ESP32-C6FH4, TPS82130SIL and DRV8876RGT, with the XL-1010RGBC-WS2812B-DZ and K22 among its other parts. Its parts include 25 capacitors, 16 connectors, 12 resistors, 7 diodes and 5 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Main components

5

Parts

73
QtyValueFootprintReferences
8u1liebler_PASSIVES:SMD0201C7, C9, C10, C14, C19, C21, C25, C26
41kliebler_PASSIVES:SMD0201R4, R9, R11, R12
4Dliebler_SEMICONDUCTORS:D_SOD-123F_smallerD2, D3, D4, D5
310kliebler_PASSIVES:SMD0201R5, R8, R10
310u/25Vliebler_PASSIVES:SMD0603C15, C20, C22
210nliebler_PASSIVES:SMD0201C4, C4
210uliebler_PASSIVES:SMD0402C12, C18
215pliebler_PASSIVES:SMD0201C5, C6
21p5liebler_PASSIVES:SMD0201C1, C2
21uliebler_PASSIVES:SMD0201C3, C3
2AC1Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ3, J4
2GNDConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ13, J15
2LSPConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ5, J6
2TPM2008 EP3-APackage_DFN_QFN:Diodes_DFN1006-3Q1, Q2
2XL-1010RGBC-WS2812Bliebler_OPTO:XL-1010RGBC-WS2812BD6, D7
2k47liebler_PASSIVES:SMD0201R1, R6
112VConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ1
122kliebler_PASSIVES:SMD0201R3
122n/25Vliebler_PASSIVES:SMD0201C8
122uliebler_PASSIVES:SMD0402C17
122u/25Vliebler_PASSIVES:SMD0805C11
12nliebler_PASSIVES:SMD0201L2
13V3Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ14
13n3liebler_PASSIVES:SMD0201C16
140MHzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
1AntennaRF_Antenna:Johanson_2450AT18x100AE1
1BootButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW2
1DRV8876RGTPackage_DFN_QFN:UQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mmU7
1ESP32-C6FH4Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mmU4
1IPS_160_40_10Pliebler_OPTO:IPS LCD 0.99 40x160U6
1Lliebler_PASSIVES:SMD0201L1
1LEDLED_SMD:LED_0402_1005MetricD1
1M1liebler_PASSIVES:SMD0201R2
1M1Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ7
1M2Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ8
1MAX98357A_WLP_PackagePackage_BGA:WLP-9_1.448x1.468mm_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mmU2
1PROG ESPConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ2
1ResetButton_Switch_SMD:SW_Push_SPST_NO_Alps_SKRKSW1
1SCLConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ11
1SDAConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ12
1TPS82130Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalViasU3
1USB_B_MicroConnector_USB:USB_Micro-B_Amphenol_10104110_HorizontalJ16
1X1Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ9
1X2Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ10
1k22liebler_PASSIVES:SMD0201R7

Similar boards

  • 4 layers38.4 × 128.5 mmPlantpal, the printed circuit board in 3D

    Plantpal

    teapotlaboratories/plantpal

    Your pal in plant care

    121 parts98MIT
  • 4 layers21 × 17.8 mmXIAO ESP32 C6, the printed circuit board in 3D

    XIAO ESP32 C6

    MitkoDyakov/Calipatron

    I design my own digital caliper based on STM32F103C8T6 blue pill.

    83 parts47MIT
  • 4 layers53.5 × 33 mmH C6-ulp, the printed circuit board in 3D

    H C6-ulp

    martinberlin/H-C6-ulp

    ESP32C6 in a very low power design with a 24 pin FPC for a small SPI Epaper

    82 parts4GPL-3.0
  • 6 layers104.8 × 77 mmGame console-1, the printed circuit board in 3D

    Game console-1

    enigmr/game-console-1

    Hobby handheld game console from scratch.

    213 parts2MIT
  • 2 layers25.5 × 23 mmYumbuddy, the printed circuit board in 3D

    Yumbuddy

    marrowbuster/yumbuddy

    tiny lil' esp32-c6 based wireless development board designed for the flipper zero. only takes up one set of gpio pins!

    35 parts2
  • 2 layers87.3 × 125 mmPCB TCC, the printed circuit board in 3D

    PCB TCC

    DaFrancoGui/TCC

    Repositório para compilação de arquivos de código e de texto referentes ao meu trabalho de conclusão de curso

    6 parts
  • 4 layers54 × 29 mmWSB Device, the printed circuit board in 3D

    WSB Device

    emaneric/Wireless-Serial-Bridge

    A battery powered ESP32 based serial bridge

    99 parts
  • 2 layers85 × 75 mmGeiger Counter, the printed circuit board in 3D

    Geiger Counter

    perpuchaty/MQTT-Geiger-Counter

    Portable Geiger counter with WiFi and MQTT. Home assistant compatible

    137 parts

Questions

How big is the Iotrain PCB?

It measures 19 × 13.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Iotrain use?

73 parts, built around the ESP32-C6FH4, TPS82130SIL, DRV8876RGT and XL-1010RGBC-WS2812B-DZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Iotrain KiCad files?

From the klaus-liebler/iotrain repository on GitHub, at the commit this page was made from: the board is iotrain/iotrain.kicad_pcb and its schematic iotrain/iotrain.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Iotrain design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).