4 layers170 × 120 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
286 parts1
4 layers100.4 × 83 mm
Component tester
kitspace/component_tester1A keychain version of the Mikrontroller.net AVR component tester
- Size
- 100.4 × 83 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 93
- Pads
- 559
- Tracks, vias
- 234, 20
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2020
- Updated
- 11 Sep 2020
Overview
Component tester is an open-source printed circuit board by kitspace, from the kitspace/component_tester repository on GitHub. It is a 4-layer board of 100.4 × 83 mm with 79 parts on 93 nets, routed with 234 tracks and 20 vias.
It is built around the ATMEGA328P-MMH, FT232RL and MCP1640-I/MC, with the MAX1811ESA+, BSS138 and BAS40 among its other parts. Its parts include 28 resistors, 22 capacitors, 6 diodes, 4 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATMEGA328P-MMH
VQFN-28-EP(5x5)-40℃~+85℃ 1.8V~5.5V 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH VQFN-28-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersMCP1640-I/MC
DFN-8(2x3)-40℃~+125℃@(TJ) 1 19uA 2V~5.5V 350mA 500kHz 800mV~5.5V Adjustable Boost Boost Built-in Yes DFN-8(2x3) DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
MAX1811ESA+
SOIC-8-40℃~+85℃ 1 2.5uA 4.2V 4.35V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、涓流充电、可编程充电电流、软启动、欠压锁定 SOIC-8 Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBAS40
SOT-23-55℃~+125℃ 1 Independent 1V@40mA 200mA 200nA@30V 40V 600mA SOT-23 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching DiodesBC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BSS123
SOT-23-55℃~+150℃ 1 N-channel 1.4V 1.4nC@10V 100V 170mA 22pF 2pF 3.5pF 680mW 6Ω@10V、10Ω@4.5V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
CR2032
-- Unclassified goods ROHSMaxellUncategorisedPMV65XP
SOT-23-55℃~+150℃ 1 P-Channel 2.8A 20V 480mW 7.7nC@4.5V 744pF 74mΩ@4.5V SOT-23 MOSFETs ROHSNexperiaMOSFETs
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | KiCad/Resistors_SMD.pretty:R_0201 | R401, R402, R403, R404, R405, R406, R407, R408 |
| 8 | 10k | KiCad/Resistors_SMD.pretty:R_0201 | R201, R202, R203, R205, R210, R211, R212, R213 |
| 6 | V 3p | KiCad/Capacitors_SMD.pretty:C_0201 | C208, C209, C210, C211, C212, C213 |
| 4 | 1uF | KiCad/Capacitors_SMD.pretty:C_0603 | C404, C406, C407, C408 |
| 3 | 1N4148 | Adafruit 128x64 Mono OLED PCB v2:SOD-323 | D401, D402, D403 |
| 3 | 470k | KiCad/Resistors_SMD.pretty:R_0201 | R215, R217, R219 |
| 3 | 680 | KiCad/Resistors_SMD.pretty:R_0201 | R214, R216, R218 |
| 2 | 0R-JUMPA | component_tester:A0R-JMP | J301, J302 |
| 2 | 10uF | KiCad/Capacitors_SMD.pretty:C_0805 | C201, C403 |
| 2 | 22p | KiCad/Capacitors_SMD.pretty:C_0201 | C204, C205 |
| 2 | 4,7u | component_tester:C-TAN_A | C302, C303 |
| 2 | 47u | KiCad/Capacitors_SMD.pretty:C_0805 | C203, C207 |
| 2 | BSS138 | Adafruit 128x64 Mono OLED PCB v2:SOT23-WIDE | Q401, Q402 |
| 1 | 100 | KiCad/Resistors_SMD.pretty:R_0402 | R301 |
| 1 | 100n | KiCad/Capacitors_SMD.pretty:C_0805 | C301 |
| 1 | 100n | KiCad/Capacitors_SMD.pretty:C_0402 | C202 |
| 1 | 1M | KiCad/Resistors_SMD.pretty:R_0201 | R204 |
| 1 | 1n | KiCad/Capacitors_SMD.pretty:C_0201 | C206 |
| 1 | 2.2uF/16V | KiCad/Capacitors_SMD.pretty:C_0603 | C405 |
| 1 | 240k | KiCad/Resistors_SMD.pretty:R_0201 | R207 |
| 1 | 330k | KiCad/Resistors_SMD.pretty:R_0201 | R209 |
| 1 | 390K | KiCad/Resistors_SMD.pretty:R_0201 | R409 |
| 1 | 4.7uH | KiCad/Resistors_SMD.pretty:R_0603 | L201 |
| 1 | 750k | KiCad/Resistors_SMD.pretty:R_0201 | R206 |
| 1 | 8 MHz | mcous/kicad-lib/footprints/crystal.pretty:NDK-NX3225GA_xtal | Q201 |
| 1 | ATmega328P-MMH | KiCad/Housings_DFN_QFN.pretty:QFN-28-1EP_4x4mm_Pitch0.4mm | IC202 |
| 1 | BAS40 | KiCad/LEDs.pretty:LED_0402 | D203 |
| 1 | BAV99 | digikey/digikey-kicad-library/src/Source_Footprints:SOT-523 | D201 |
| 1 | BC847 | digikey/digikey-kicad-library/src/Source_Footprints:SOT-523 | T204 |
| 1 | BSS123 | component_tester:SOT23 | T301 |
| 1 | BSS123 | KiCad/TO_SOT_Packages_SMD.pretty:SOT-323_SC-70 | T203 |
| 1 | BSS84 | component_tester:SOT23 | T202 |
| 1 | CR2032 | StefanHamminga/SH_Batteries.pretty:Battery_Retainer_2032_BK-912 | BAT201 |
| 1 | Conn_01x30 | component_tester:SSD1306 | OLED1 |
| 1 | DRAWING | drawings:pads | DRAWING201 |
| 1 | DRAWING | drawings:combined | DRAWING101 |
| 1 | DRAWING | drawings:pads_bottom | DRAWING202 |
| 1 | EVQ | component_tester:PANASONIC_EVQ | SW201 |
| 1 | FT232RL | component_tester:SSOP28 | IC301 |
| 1 | ISP | component_tester:Pin_Header_Straight_2x03_Pitch1.27mm | X202 |
| 1 | LEDCHIP-LED0805 | component_tester:CHIP-LED0805 | LED301 |
| 1 | MAX1811 | component_tester:SO08 | IC302 |
| 1 | MCP1640 | component_tester:SOT23-6 | IC201 |
| 1 | MICRO-USB | component_tester:TE_1981568-1 | X201 |
| 1 | PMV65XP | component_tester:SOT23 | T201 |
Questions
How big is the Component tester PCB?
It measures 100.4 × 83 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Component tester use?
79 parts, built around the ATMEGA328P-MMH, FT232RL, MCP1640-I/MC and MAX1811ESA+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Component tester KiCad files?
From the kitspace/component_tester repository on GitHub, at the commit this page was made from: the board is kicad/component_tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Component tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask kitspace before reusing the design.
More from kitspace/component_tester
12- 2 layers120 × 90 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
234 parts1 - 2 layers120.6 × 80.7 mm
Old BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
184 parts1 - 2 layers170 × 120 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
28 parts1 - 2 layers120 × 90 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
21 parts1 - 2 layers120 × 90 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
17 parts1 - 2 layers170 × 38.5 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
13 parts1 - 2 layers170 × 120 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
13 parts1 - 2 layers170 × 120 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
13 parts1 - 2 layers120 × 90 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
12 parts1 - 2 layers176 × 53 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
12 parts1 - 2 layers120 × 27.7 mm
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester
8 parts1
Similar boards
- 2 layers40 × 82 mm
JCMuac
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
46 parts5BSD-2-Clause - 2 layers50 × 100 mm
ActiveLoad
ahessling/ActiveLoad
Small 12 Watt Active Load (dummy load) with STM32 microcontroller
83 parts5MIT - 2 layers60 × 110.8 mm
- 2 layers60.1 × 29.2 mm
- 2 layers76.2 × 147.3 mm
- 2 layers67.7 × 49.8 mm
- 4 layers95.9 × 90.2 mm
Ykts payload
cansat-ptl/cubesat-boards
YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards
156 parts - 2 layers115 × 65 mm
Bms monitor
eagletrt/bms-monitor
Slave BMS module to monitor 24s cells voltages and temperatures.
256 parts