Skip to the content
2 layers120 × 90 mmBMS dacus, the printed circuit board in 3D

A keychain version of the Mikrontroller.net AVR component tester

Size
120 × 90 mm
Copper layers
2
Thickness
2.5 mm
Parts
234
Nets
166
Pads
1,324
Tracks, vias
1,428, 281
Pours
41
Routed
Yes
KiCad
KiCad 4
Created
11 Sep 2020
Updated
11 Sep 2020

Overview

BMS dacus is an open-source printed circuit board by kitspace, from the kitspace/component_tester repository on GitHub. It is a 2-layer board of 120 × 90 mm with 234 parts on 166 nets, routed with 1,428 tracks and 281 vias.

It is built around the LMP8481MM-H, FAN5622SX and LM5050MK-1. Its parts include 99 resistors, 54 capacitors, 21 diodes, 9 ICs and 5 connectors. It belongs with the power boards and the ESP32 and STM32 boards of this library.

Main components

3

Parts

234
QtyValueFootprintReferences
3210Kdacusnewlib:SM0805-dacR1, R3, R4, R13, R14, R15, R17, R22, R62, R64, R65, R67, R68, R69, R70, R108 +16
201Kdacusnewlib:SM0805-dacR2, R12, R16, R20, R23, R25, R39, R40, R46, R63, R66, R72, R76, R78, R80, R82 +4
19100nFdacusnewlib:SM0805-dacC13, C15, C17, C20, C21, C28, C29, C32, C34, C37, C40, C41, C43, C45, C49, C50 +3
1612dacusnewlib:SM0805-dacR112, R113, R114, R115, R116, R117, R118, R119, R120, R121, R122, R123, R124, R125, R126, R127
13100Kdacusnewlib:SM0805-dacR71, R73, R91, R97, R100, R101, R102, R103, R104, R105, R106, R107, R110
131uFdacusnewlib:SM0805-dacC3, C7, C10, C12, C24, C25, C26, C27, C33, C35, C38, C46, C48
1322uFdacusnewlib:SM0805-dacC4, C5, C9, C11, C14, C16, C18, C19, C23, C39, C42, C44, C47
13SCHdacusnewlib:Diode-dac3D1, D2, D4, D10, D11, D13, D14, D17, D19, D20, D21, D23, D24
8Ndacusnewlib:PG-TDSON-dac-vias3Qb1, Qb2, Qb13, Qb14, Qb20, Qb21, Qb27, Qb28
710kdacusnewlib:SM0805-dacR5, R6, R7, R9, R10, R60, R61
61mRdacusnewlib:SM1206R27, R28, R29, R52, R53, R54
6Ndacusnewlib:SOT23-dac-4Qb29, Qb31, Qb32, Qb33, Qb34, Qb35
5ZENERdacusnewlib:Diode-dac3D12, D15, D16, D18, D25
4dacusnewlib:H1-3mm-7.2, , ,
4100dacusnewlib:SM0805-dacR11, R36, R109, R111
4Pdacusnewlib:SOT23-dac-4Qb30, Qb36, Qb37, Qb38
34.7nFdacusnewlib:SM0805-dacC30, C31, C36
3CONN_1dacusnewlib:1PIN_Power-dac-65A2Battery+1, Load+1, PV1
3FUSEdacusnewlib:SM1808-dacF1, F2, F3
3LMP8481dacusnewlib:LMP8481-SSOP8-dacU4, U5, U8
2dacusnewlib:H1-5mm-7.2,
210uFdacusnewlib:SM1206C51, C52
222pFdacusnewlib:SM0603_CapaC1, C2
233nFdacusnewlib:SM0805-dacC6, C8
2SSRdacusnewlib:Opto-dac3OPTO1, OPTO2
2VAL**dacusnewlib:fiducial-dac3fiducial-dac, fiducial-dac
1H1-5mm
1dacusnewlib:H1-5x6mm
11kdacusnewlib:SM0805-dacR74
130V 5000Wdacusnewlib:DO-214AB-dac-simple4-TVS3TVS3
130V 5000Wdacusnewlib:DO-214AB-dac-simple4-TVS1TVS1
132768dacusnewlib:32khzX1
133uHdacusnewlib:5x5-L1L1
1CellMondacusnewlib:5x2_SMD-dacP4
1ESP32dacusnewlib:ESP32-2M1
1ExtConnectordacusnewlib:SMD-8-dac1P3
1FAN5622dacusnewlib:LM5050-SOT23_6-dacU2
1ISL94203dacusnewlib:QFP48-dac-3U9
1LCD-10pindacusnewlib:LCD-24-10pinLCD1
1LM5050dacusnewlib:LM5050-SOT23_6-dacU6
1LMR16006dacusnewlib:LM5050-SOT23_6-dacU10
1LOGOdacusnewlib:Logo-copper-ROHSG***
1Molex 0878321622dacusnewlib:con_8x2x2mm-dacP2
1S25FL127dacusnewlib:Flash-SO8E-dac2U1
1SCHdacusnewlib:SBRT20M80-dac-simple4-D8D8
1SCHdacusnewlib:SBRT20M80-dac-simple4-D9D9
1SCHdacusnewlib:SBRT20M80-dac-simple4-D7D7
1STM32F373-48dacusnewlib:LQFP48-3-dacU3
1THERMISTORdacusnewlib:SM0805-dacTH1
1TouchButtonsdacusnewlib:SIL-5-dacP1
1USB-MICRO-Bdacusnewlib:USB_MICRO_B-2CON1
1VAL**dacusnewlib:Logo1Logo1
1VAL**dacusnewlib:OSHW_COPPER_10MMOSHW_COPPER_10MM

More from kitspace/component_tester

12
  • 4 layers170 × 120 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    286 parts1
  • 2 layers120.6 × 80.7 mmOld BMS dacus, the printed circuit board in 3D

    Old BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    184 parts1
  • 4 layers100.4 × 83 mmComponent tester, the printed circuit board in 3D

    Component tester

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    79 parts1
  • 2 layers170 × 120 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    28 parts1
  • 2 layers120 × 90 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    21 parts1
  • 2 layers120 × 90 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    17 parts1
  • 2 layers170 × 38.5 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    13 parts1
  • 2 layers170 × 120 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    13 parts1
  • 2 layers170 × 120 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    13 parts1
  • 2 layers120 × 90 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    12 parts1
  • 2 layers176 × 53 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    12 parts1
  • 2 layers120 × 27.7 mmBMS dacus, the printed circuit board in 3D

    BMS dacus

    kitspace/component_tester

    A keychain version of the Mikrontroller.net AVR component tester

    8 parts1

Similar boards

  • 4 layers100 × 70 mmZSWatch Watch DevKit, the printed circuit board in 3D

    ZSWatch Watch DevKit

    ZSWatch/Watch-DevKit-HW

    The hardware repo for the ZSWatch Development Kit.

    132 parts188GPL-3.0
  • 4 layersSmart Watch, the printed circuit board in 3D

    Smart Watch

    jacksterb1234/Smart_Watch

    A fully custom smartwatch designed from the ground up, featuring a purpose-built PCB, BLE connectivity, and a 3D-printed case. Designed for complete control over hardware and software integration.

    73 parts
  • 4 layers41 × 12.4 mmZSWatch, the printed circuit board in 3D

    ZSWatch

    yuxiangcheng2002/KiCad-lib-ref

    73 parts
  • 2 layers428.6 × 121.4 mmA2000Serotina, the printed circuit board in 3D

    A2000Serotina

    grahamshaw1972/a2000Serotina

    The A2000 Serotina Keyboard is a build it yourself Open Source Hardware Mechanical Keyboard for the Amiga A2000 and A3000 computers. Features are:

    234 parts39GPL-3.0
  • 2 layers130 × 265.4 mmDc power supply, the printed circuit board in 3D

    Dc power supply

    dc-power-supply/dc-power-supply

    OSHW DC power supply

    234 parts30
  • 2 layers9.3 × 11.3 mmErgodonk pico zero, the printed circuit board in 3D

    Ergodonk pico zero

    JellyTitan/ErgoDonk

    ErgoDox variant using standard SA keycaps, FDM case, and blackpill MCU

    234 parts10MIT
  • 2 layers434.5 × 208.2 mmEurope ergo smd, the printed circuit board in 3D

    Europe ergo smd

    Supermagnum/Europe-ergo

    A 94 key ergonomic, split keyboard suitable for European countries.

    234 parts8GPL-3.0

Questions

How big is the BMS dacus PCB?

It measures 120 × 90 mm and has 2 copper layers, 2.5 mm thick.

What parts does the BMS dacus use?

234 parts, built around the LMP8481MM-H, FAN5622SX and LM5050MK-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BMS dacus KiCad files?

From the kitspace/component_tester repository on GitHub, at the commit this page was made from: the board is playground/SBMS_HW/SBMS40_v02c/main-pcb-40/BMS-dacus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BMS dacus design in my own project?

Its repository states no licence, so its author keeps all rights: ask kitspace before reusing the design.