

Caravel breakout fpga ICE40UP5K TT3
Tiny Tapeout breakout PCBs
- Size
- 45 × 52.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 234
- Nets
- 93
- Pads
- 511
- Tracks, vias
- 734, 127
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Mar 2024
- Updated
- 29 Oct 2026
Overview
Caravel breakout fpga ICE40UP5K TT3 is an open-source printed circuit board by TinyTapeout, from the TinyTapeout/breakout-pcb repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 45 × 52.5 mm with 234 parts on 93 nets, routed with 734 tracks and 127 vias.
It is built around the ICE40UP5K-SG48I, W25Q32JVSSIQ and AP2112K-1.2TRG1, with the AP2112K-3.3TRG1, CRG0603ZR and RC0402FR-0710KL among its other parts. Its parts include 38 resistors, 22 capacitors, 4 ICs, 3 connectors and 2 diodes. It belongs with the interfaces and adapters and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
12ICE40UP5K-SG48I
QFN-48-EP(7x7)-40℃~+100℃ 1.14V~1.26V 1171456bit 39 5280 660 iCE40 UltraPlus QFN-48-EP(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSLatticeProgrammable Logic Device (CPLDs/FPGAs)W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAP2112K-1.2TRG1
SOT-25-40℃~+85℃@(Ta) 1 1.2V 250mV@(600mA) 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-25 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsCRG0603ZR
0603-55℃~+155℃ 0Ω 100mW 75V Thick Film Resistor 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountRC0402FR-0710KL
UncategorisedUnknown makerRC0402FR-07100KL
UncategorisedUnknown makerCR0603-FX-1501ELF
0603-55℃~+155℃ 1.5kΩ 100mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountCR0603-FX-68R0ELF
0603-55℃~+155℃ 100mW 68Ω 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSBournsChip Resistor - Surface MountM20-7812045
SMD,P=2.54mmFemale HeadersHarwin1N4148WT-7-CN
SOD-523SOD-523 Switching Diodes ROHSChipNoboSwitching Diodes0ZCK0035FF2G
0805-40℃~+85℃ 1.2Ω 100A 100ms 250mΩ 350mA 500mW 6V 750mA 0805 Resettable Fuses ROHSBel FuseResettable Fuses
README
breakout-gf-cob/README.mdTiny Tapeout GF 0p2 COB ETR PCB

Parts
234| Qty | Value | Footprint | References |
|---|---|---|---|
| 101 | StitchingVia-0.3mm | flyingcarsfootprints:StitchingVia-0.3mm | STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1, STITCH1 +85 |
| 45 | G*** | kibuzzard-6288F08E | kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E, kibuzzard-6288F08E +29 |
| 12 | 0R | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8, R9, R22, R23, R24, R31 |
| 10 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C2, C4, C7, C9, C11, C12, C14, C16, C21, C22 |
| 9 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C6, C8, C10, C13, C15, C17 |
| 9 | R_10k_0402 | Resistor_SMD:R_0402_1005Metric | R10, R15, R16, R20, R21, R25, R26, R28, R30 |
| 8 | R_100k_0402 | Resistor_SMD:R_0402_1005Metric | R27, R32, R33, R34, R35, R36, R37, R38 |
| 6 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5, NT6 |
| 3 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3 |
| 2 | 1k5 | Resistor_SMD:R_0603_1608Metric | R17, R29 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 68R | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | DNI | Capacitor_SMD:C_0603_1608Metric | C19, C20 |
| 2 | Logo | Logos:ef_logo | EFABNAME, EFABNAME |
| 2 | REF-182665-01 | BreakoutCommon:FH-00339 | CON1, CON2 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 1N4148WT-7 | Diode_SMD:D_SOD-523 | D1 |
| 1 | 20MHz | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1 |
| 1 | 350mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 434121025816 | TinyTapeout:434121025816 | SW1 |
| 1 | 6800pF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | AP2112K-1.2 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ICE40UP5K-SG48ITR | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LOGO | flyingcarsfootprints:PsychoLogoSmall | G*** |
| 1 | Logo | Logos:ef_logo_graphical | EFABLOGO |
| 1 | R_100R_0402 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | R_2k_0402 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | USB4500-03-0-A_REVA | TinyTapeout:GCT_USB4500-03-0-A_REVA | J3 |
| 1 | W25Q32JVSSIM | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
The 231 most common of 234 parts.
More from TinyTapeout/breakout-pcb
11- 4 layers45 × 52.5 mm

- 2 layers85 × 85 mm

- 2 layers50 × 52 mm

- 4 layers50 × 50 mm

- 4 layers50 × 53 mm

- 4 layers50 × 50 mm

- 4 layers50 × 50 mm

- 4 layers50 × 48 mm

- 2 layers45 × 52.5 mm

- 2 layers50 × 52 mm

- 4 layers19 × 42.1 mm

Similar boards
- 4 layers53.5 × 65.5 mm

ChipigniteExplain
efabless/chipignite_discover
This FPGA experimentation and development board was developped for efabless chipignite workshops and labs to serve as an easy to use experimentation board and stepping stone towards ASIC digital design, allowing for…
251 parts2Apache-2.0 - 4 layers104.5 × 81 mm

Tinytapeout demo
KiCad/kicad-source-mirror
This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.
309 parts3.1kGPL-3.0 - 6 layers83.5 × 90 mm

- 4 layers22.9 × 61 mm

- 4 layers27.9 × 63.5 mm

Pico2-ice
tinyvision-ai-inc/pico2-ice
Doc | Hardware | SDK | Schematic | Assembly | Discord
124 parts60MIT - 4 layers100 × 40 mm

- 4 layers20 × 45 mm

Module
OrbitalCommons/gumstick
Gumstick: ESP32 + iCE40UP5K FPGA module (v1 DF40 board-to-board, v2 M.2 gold-finger draft) and its programming carrier. KiCad 10.
52 parts1MIT - 6 layers80 × 60 mm

Ice core
enkhbold470/ice-core
iCE40UP5K FPGA board with 8 MB PSRAM and three Pmods, programmed over USB-C by an RP2040. 6-layer KiCad 10 board.
78 partsCERN-OHL-S-2.0
Questions
How big is the Caravel breakout fpga ICE40UP5K TT3 PCB?
It measures 45 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Caravel breakout fpga ICE40UP5K TT3 use?
234 parts, built around the ICE40UP5K-SG48I, W25Q32JVSSIQ, AP2112K-1.2TRG1 and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Caravel breakout fpga ICE40UP5K TT3 KiCad files?
From the TinyTapeout/breakout-pcb repository on GitHub, at the commit this page was made from: the board is ASIC-simulator/tt03-fpga-ICE40UP5k/caravel-breakout-fpga-ICE40UP5K-TT3.kicad_pcb and its schematic ASIC-simulator/tt03-fpga-ICE40UP5k/caravel-breakout-fpga-ICE40UP5K-TT3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Caravel breakout fpga ICE40UP5K TT3 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).