
BMS dacus
kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

A keychain version of the Mikrontroller.net AVR component tester
Old BMS dacus is an open-source printed circuit board by kitspace, from the kitspace/component_tester repository on GitHub. It is a 2-layer board of 120.6 × 80.7 mm with 184 parts on 137 nets, routed with 742 tracks and 107 vias.
It is built around the LMP8481MM-H, FAN5622SX and LM5050MK-1. Its parts include 79 resistors, 44 capacitors, 24 connectors, 10 ICs and 7 diodes. It belongs with the power boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 10K | SM0805 | R10, R11, R13, R14, R25, R26, R28, R30, R32, R34, R36, R38, R40, R42, R45, R46 +6 |
| 19 | CONN_1 | 1PIN_SMD | P6, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24 +3 |
| 18 | 100nF | SM0805 | C4, C18, C21, C24, C27, C30, C32, C35, C37, C38, C39, C40, C41, C42, C43, C44 +2 |
| 17 | 1K | SM0805 | R12, R15, R18, R19, R20, R21, R22, R29, R31, R33, R35, R37, R39, R41, R43, R44 +1 |
| 16 | 12 | SM0805 | R64, R65, R66, R67, R68, R69, R70, R71, R72, R73, R74, R75, R76, R77, R78, R79 |
| 11 | 1uF | SM0805 | C7, C11, C12, C13, C15, C22, C23, C25, C31, C33, C36 |
| 10 | 470K | SM0805 | R54, R55, R56, R57, R58, R59, R60, R61, R62, R63 |
| 8 | 22uF | SM0805 | C1, C5, C8, C16, C17, C19, C20, C28 |
| 7 | 10k | SM0805 | R1, R2, R3, R4, R5, R16, R17 |
| 6 | 100 | SM0805 | R23, R24, R47, R48, R50, R51 |
| 5 | N | SOT23-dac | Qb1, Qb2, Qb3, Qb4, Qb5 |
| 3 | Hole-large | , , | |
| 3 | 4.7nF | SM0805 | C26, C29, C34 |
| 3 | BAV99U | SOT23_6 | D2, D3, D5 |
| 3 | P | SOT23-dac | Qb6, Qb7, Qb8 |
| 2 | H1-2 | , | |
| 2 | 22pF | SM0805 | C2, C3 |
| 2 | 33nF | SM0805 | C10, C14 |
| 2 | CONN_1 | 60p-power | P3, P4 |
| 2 | DIODESCH | Diode1 | D1, D4 |
| 2 | LM5050 | SOT23_6 | U9, U10 |
| 2 | LMP8481 | SSOP8 | U6, U7 |
| 2 | ZENER | DO-214AC(SMA) | D6, D7 |
| 1 | 1k | SM0805 | R27 |
| 1 | 32786Hz | Quartz | X1 |
| 1 | 33uH | SM1210 | L1 |
| 1 | AS7620 | Opto | U3 |
| 1 | CONN_1 | SMD-5p-dac | P5 |
| 1 | CONN_10X2 | 6p-con | P2 |
| 1 | CONN_5X2 | 10p-con | P1 |
| 1 | ESP03 | DIP-14__300 | M1 |
| 1 | FAN5622 | LQFP48 | U1 |
| 1 | FUSE | SM1808 | F1 |
| 1 | ISL94203 | QFP48-dac-2 | U8 |
| 1 | LCD_320x240 | LCD | LCD1 |
| 1 | LMP8481 | QFP48-dac-2 | U5 |
| 1 | S25FL127 | Opto | U4 |
| 1 | STM32F373-48 | MLPQ12-1 | U2 |
| 1 | VAL** | Logo2 | Logo2 |
| 1 | VAL** | Logo1 | Logo1 |

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.

jacksterb1234/Smart_Watch
A fully custom smartwatch designed from the ground up, featuring a purpose-built PCB, BLE connectivity, and a 3D-printed case. Designed for complete control over hardware and software integration.



QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

heiso/macrolev
Macrolev is an open source analog keyboard powered by Hall Effect switches

MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
It measures 120.6 × 80.7 mm and has 2 copper layers, 1.6 mm thick.
184 parts, built around the LMP8481MM-H, FAN5622SX and LM5050MK-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kitspace/component_tester repository on GitHub, at the commit this page was made from: the board is playground/SBMS_HW/SBMS120_v03d/smallfront-pcb-120/old-BMS-dacus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kitspace before reusing the design.