

Load cell
- Size
- 122.9 × 51.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 76
- Pads
- 240
- Tracks, vias
- 356, 41
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 31 Jul 2026
- Updated
- 28 Oct 2026
Overview
Load cell is an open-source printed circuit board by kc099, from the kc099/kicad repository on GitHub. It is a 4-layer board of 122.9 × 51.8 mm with 57 parts on 76 nets, routed with 356 tracks and 41 vias.
It is built around the ESP32-WROOM-32, LM2596S-ADJ and LM358N, with the AMS1117-3.3, TLP291-4 and ULN2803 among its other parts. Its parts include 22 resistors, 12 capacitors, 10 connectors, 7 ICs and 5 diodes. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
7ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC ConvertersLM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorisedULN2803
SOP-18-300mil-20℃~+70℃ 1.7V 100uA 15pF 30V 500mA 50V 65uA 8 SOP-18-300mil Darlington Transistor Arrays ROHSShanghai Siproin MicroelectronicsDarlington Transistor ArraysSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8, R11, R12, R20, R33, R35, R36, R37 |
| 11 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R9, R10, R13, R14, R15, R16, R17, R18, R19 |
| 6 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C9, C10, C11, C12 |
| 3 | Conn_01x04_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J3, J6, J8 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J7, J9 |
| 3 | SS34 | Diode_SMD:D_SMA | D2, D4, D5 |
| 2 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C27, C30 |
| 2 | Conn_01x01 | TestPoint:TestPoint_Pad_1.0x1.0mm | J1, J4 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C13 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | C | Capacitor_Tantalum_SMD:CP_EIA-7132-28_AVX-C_Pad2.72x3.50mm_HandSolder | C26 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28 |
| 1 | Conn_01x02_Pin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J12 |
| 1 | DE1207-470 | DE1207-470:DE1207 | L1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U8 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U7 |
| 1 | LM358N | LM358N:DIP762W46P254L960H508Q8 | U2 |
| 1 | TLP291-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U5 |
| 1 | ULN2803 | ULN2803AFW:SOIC127P1030X265-18N | U1 |
| 1 | ~ | 1825910-6:hx711 | U3 |
More from kc099/kicad
12- 4 layers107.5 × 102.5 mm

- 2 layers112.7 × 110.8 mm
/8-channel_relay/8-channel_relay.kicad_pcb.jpg?size=s&soon)
- 2 layers

- 2 layers250 × 96 mm

- 4 layers199.6 × 47 mm

- 2 layers115 × 159 mm

- 2 layers102 × 95 mm

- 4 layers130.3 × 51.8 mm

- 2 layers102 × 95 mm

- 2 layers102 × 95 mm

- 4 layers151.8 × 55.2 mm

- 2 layers107.5 × 102.5 mm

Similar boards
- 2 layers63.8 × 52.7 mm

Projeto SIllion
Henriquepr15/ESP32-Motor-RS232
Projeto de hardware com ESP32, RS232 e controle de motor
59 parts - 2 layers100 × 100 mm

Hour meter board microfit can handroute
ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
152 parts - 4 layers97.8 × 99.6 mm

- 2 layers123 × 87.3 mm

- 4 layers66 × 57 mm

A1-External ESP8266-Cooling Fan Module
potpurri/A1-External-ESP8266-Cooling-Fan-Module
ESP8266-board driving an external fan for improved cooling of nozzle and prints
74 partsApache-2.0 - 2 layers99 × 105 mm

STM32 IOT GATEWAY
RiddheshVeling/Industrial-Flowmeter-Totalizer-with-Modbus-based-HMI-and-Data-Logging
EXTC Final year project: Industrial flowmeter totalizer with Modbus-based HMI for real-time monitoring and data logging using STM32 and RS485.
154 parts - 2 layers90.8 × 58.7 mm

- 2 layers85 × 56 mm

Questions
How big is the Load cell PCB?
It measures 122.9 × 51.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Load cell use?
57 parts, built around the ESP32-WROOM-32, LM2596S-ADJ, LM358N and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Load cell KiCad files?
From the kc099/kicad repository on GitHub, at the commit this page was made from: the board is loadcell_modififed _esp32/loadcell_modififed/load_cell/load_cell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Load cell design in my own project?
Its repository states no licence, so its author keeps all rights: ask kc099 before reusing the design.