OnurBAYRAM1903/KiCad-PCB-DesignKiCad Projeleri is an open-source printed circuit board by OnurBAYRAM1903, from the OnurBAYRAM1903/KiCad-PCB-Design repository on GitHub. It is a 2-layer board of 123 × 87.3 mm with 153 parts on 153 nets, routed with 1,275 tracks and 163 vias.
It is built around the MAX485ED, SIM800C and TJA1051T, with the LM2596S-ADJ, 74HC14 and AMS1117-3.3 among its other parts. Its parts include 48 resistors, 40 capacitors, 18 diodes, 15 ICs and 12 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C10, C11, C13, C14, C15, C16, C22, C23, C24, C25, C26, C27, C30, C32, C33 +4 |
| 11 | LED_BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19 |
| 10 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R13, R14, R15, R16, R23, R24, R40, R41 |
| 8 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R9, R26, R27, R28, R44, R46 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R22, R31, R42, R47 |
| 6 | 47R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20, R37, R38, R39 |
| 4 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18, C19, C20 |
| 4 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW1, SW2, SW3, SW4 |
| 3 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, RJ1, RJ2 |
| 3 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R33, R43 |
| 3 | 33pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36, C37, C38 |
| 3 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3, J8, J11 |
| 3 | RESETTABLE_FUSE-0603 | My_Library:RESETTABLE_FUSE-0603 | F1, F2, F3 |
| 3 | SS34 | Diode_SMD:D_SMC | D1, D2, D3 |
| 2 | 100uF-50V | Capacitor_SMD:CP_Elec_8x10 | C1, C5 |
| 2 | 20K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30 |
| 2 | 220uF-16V | Capacitor_SMD:CP_Elec_8x10 | C3, C7 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R35, R36 |
| 2 | 47uH | My_Library:INDUCTOR_12x12x8 | L1, L2 |
| 2 | LED_ORANGE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7, D8 |
| 2 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2, U4 |
| 2 | TVS_5V | My_Library:TVS_5V | U7, U10 |
| 1 | 100nF-10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 100uF-10V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_HandSolder | C34 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 1K8 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 1uF | Capacitor_SMD:CP_Elec_4x5.4 | C40 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 4.7uF-10V | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_HandSolder | C28 |
| 1 | 4017 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U15 |
| 1 | 47K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_HandSolder | C21 |
| 1 | 590R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34 |
| 1 | 74HC14_ | My_Library:74HC14_ | U6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | ANT | Connector_Pin:Pin_D1.0mm_L10.0mm_LooseFit | TP1 |
| 1 | BC337 | Package_TO_SOT_SMD:TSOT-23 | Q1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | C_Polarized_Small | Capacitor_SMD:CP_Elec_4x5.4 | C39 |
| 1 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J1 |
| 1 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J10 |
| 1 | Conn_01x05 | Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_5-G-5.08_1x05_P5.08mm_Horizontal | J6 |
| 1 | Conn_01x06 | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J9 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | Crystal_Small | Crystal:Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y2 |
| 1 | D_Schottky_Small | Diode_SMD:D_SOD-123 | D4 |
| 1 | LED_RGB | LED_SMD:LED_RGB_5050-6 | D6 |
| 1 | LOGO | My_Library:Atatürk | G*** |
| 1 | LOGO | My_Library:Beşiktaş | G*** |
| 1 | M24C02-FMN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | NE555D | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 1 | RJ45_USER | My_Library:RJ45_USER | J7 |
| 1 | R_Potentiometer_US | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1 |
| 1 | SDCARD_KLS | My_Library:L-KLS1-TF-003-SDCARD | U9 |
| 1 | SIM800C | RF_GSM:SIMCom_SIM800C | U13 |
| 1 | SIM_Card-8066 | My_Library:GCT_SIM8066-6-1-14-01-A_REVA | J12 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Screw_Terminal_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J5 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | USB_OTG | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2 |
The 151 most common of 153 parts.
TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.
dimipapr/TalkyPump
The legacy v1 firmware is preserved under archive/ as a behavioral reference.
Wissemtriki/GSM-Socket-KiCad
PCB design project of a GSM socket using KiCad. Includes complete PCB layout, schematics, and project files, designed for GSM module integration in embedded systems and IoT applications.
digislateplus/digislateplus.github.io
DigiSlate+ is based on the DigiSlate and is inspired by the DIY timecode generator from mitkunz. The aim for the DigiSlate+ is not only to be able to read and display timecode, but also to generate it itself.
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
It measures 123 × 87.3 mm and has 2 copper layers, 1.6 mm thick.
153 parts, built around the MAX485ED, SIM800C, TJA1051T and LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OnurBAYRAM1903/KiCad-PCB-Design repository on GitHub, at the commit this page was made from: the board is KiCad/KiCad Projeleri.kicad_pcb and its schematic KiCad/5VLEDLER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OnurBAYRAM1903 before reusing the design.