Skip to the content
2 layers44.9 × 59.2 mmDoorbell, the printed circuit board in 3D

A wireless doorbell with security features that send notifications!

Size
44.9 × 59.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
30
Pads
56
Tracks, vias
99, 3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 May 2025
Updated
7 Jun 2025

Overview

Doorbell is an open-source printed circuit board by kashsuks, from the kashsuks/Securodoor repository on GitHub. It is a 2-layer board of 44.9 × 59.2 mm with 13 parts on 30 nets, routed with 99 tracks and 3 vias.

It is built around the ESP32-CAM. Its parts include 5 resistors, 2 ICs, 2 diodes, 1 connector and 1 switch. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

Securodoor

Securodoor is a wireless smart doorbell system that uses a esp32-cam in order to monitor your porch!!

Why did i build this

Welp I just moved into a new house and as expected, there isnt any smart doorbell or anything, so I decided to make my own, at my own ease. I wanted it to be able to send messages to my phone when I have someone at the door and the microphone is so I can hear the other person on the end

Any cool ideas I had in this project

Since the esp32 cam doesnt have its own microphone module, I decided to use a microphone amplifier and merge the Audio from the mic and the Video from the camera in order to have A/V for my footage

My images!!

Schematic: Schematic

PCB: PCB

3D Model of PCB: 3d Model

3d Model of my Case!!: 3D model

I realized that I didn't need a PCB since I wont be using it and instead handwiring everything a bit too late :D

BOM

Product NamePriceLinkQuantity
Esp32-cam$6.15Link1
Open Push Button$0.90Link1
Red LED (I have this)$5.95Link1
Blue LED (I have this)$5.95Link1
USB-C Breakout Board$2.62Link1
Max9814 Amplifier$1.86Link1
5V Passive Buzzer$7.28Link1
1k Ohm Resistor$0.10Link2
10k Ohm Resistor$3.99Link2
5.1k Ohm Resistor$6.05Link2

Parts

13
QtyValueFootprintReferences
21kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R3
25.1kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1BlueLED_THT:LED_D5.0mmD2
1ESP32-CAMESP32-CAM:ESP32-CAMU1
1KPEG242-5VXDCR_KPEG242-5V:XDCR_KPEG242-5VLS1
1LOGOlogo:hcG***
1MAX9814MAX9814ETD_T:SON40P300X300X80-15NU2
1RedLED_THT:LED_D5.0mmD1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H13mmSW1
1USB-C Breakout BoardConnector:FanPinHeader_1x04_P2.54mm_VerticalJ1

Similar boards

  • 2 layers38.1 × 63.5 mmSstv backpack, the printed circuit board in 3D

    Sstv backpack

    vaugerbird/sstv-backpack

    A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!

    29 parts94GPL-2.0
  • 2 layers146.2 × 99 mmFPVRover, the printed circuit board in 3D

    FPVRover

    Circuit-Digest/ESP32-Cam-Surveillance-Car

    Watch full video on ESP32 surveillance car

    35 parts15
  • 2 layers78 × 62 mmPortier connecte, the printed circuit board in 3D

    Portier connecte

    InnoGreenTech/ESP32-CAM-pir-static-relay

    ESP32-CAM mounting on a board with pir, photo-resistor sensors, AC/DC power and a static relay.

    16 parts5
  • 2 layers188.2 × 129.7 mmQms kiosk, the printed circuit board in 3D

    Qms kiosk

    jamestansx/qms

    Queue Management System

    10 parts5
  • 2 layers82.3 × 43.5 mmNight Gogle, the printed circuit board in 3D

    Night Gogle

    airsoftak25/Night-Gogle

    My small project about creating a Night vision gogle witch cost less than 2000CZK each

    29 parts2
  • 2 layers82 × 58 mmNoirShot, the printed circuit board in 3D

    NoirShot

    rabinniroula/NoirShot

    instant thermal camera

    50 parts2
  • 2 layers53.8 × 34 mmPCBcam, the printed circuit board in 3D

    PCBcam

    dipenac/camara-esp32-espidf

    - [x] Y dentro del folder de projects utilizamos una de las funciones que presta idf.py, con la cual creamos un projecto con el nombre que deseemos.

    11 parts1
  • 2 layers78.8 × 63 mmLynx-30-Camera Trap, the printed circuit board in 3D

    Lynx-30-Camera Trap

    Engr-umer-mohammed/Lynx-30-Camera-Trap

    Low-power long-range wireless camera trap designed using KiCad and Simulink.

    37 parts1MIT

Questions

How big is the Doorbell PCB?

It measures 44.9 × 59.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Doorbell use?

13 parts, built around the ESP32-CAM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Doorbell KiCad files?

From the kashsuks/Securodoor repository on GitHub, at the commit this page was made from: the board is pcb/doorbell.kicad_pcb and its schematic pcb/doorbell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Doorbell design in my own project?

Its repository states no licence, so its author keeps all rights: ask kashsuks before reusing the design.