Skip to the content
2 layers78.8 × 63 mmLynx-30-Camera Trap, the printed circuit board in 3D

Low-power long-range wireless camera trap designed using KiCad and Simulink.

Size
78.8 × 63 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
30
Pads
134
Tracks, vias
137, 8
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Jun 2026
Updated
12 Jun 2026

Overview

Lynx-30-Camera Trap is an open-source printed circuit board by Engr-umer-mohammed, from the Engr-umer-mohammed/Lynx-30-Camera-Trap repository on GitHub, published under the MIT licence. It is a 2-layer board of 78.8 × 63 mm with 37 parts on 30 nets, routed with 137 tracks and 8 vias.

It is built around the ESP32-CAM, AMS1117-3.3 and TPS63060DSC, with the IRL 81A and AO3401A among its other parts. Its parts include 9 capacitors, 9 resistors, 6 diodes, 3 ICs and 2 connectors. It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 and RISC-V boards of this library.

Main components

5

README

README.md

Lynx-30: Simulation-Driven Low-Power Long-Range Camera Trap System

Overview

Lynx-30 is a low-power wireless camera trap system designed around the ESP32-CAM module. The system combines motion detection, infrared illumination, and efficient power management to provide battery-powered image capture for wildlife monitoring and remote sensing applications.

The project was developed using a modular hierarchical design approach and includes complete schematic capture, PCB layout, BOM generation, and manufacturing-ready Gerber files.

Features

  • Low-power battery-powered operation
  • ESP32-CAM image capture and wireless connectivity
  • PIR-based motion detection
  • Infrared illumination for night operation
  • High-efficiency TPS63060 power architecture
  • 5V and 3.3V regulated power rails
  • PMOS-based power gating for IR LEDs
  • Hierarchical schematic design
  • Manufacturing-ready PCB design
  • Support for 2-layer and 4-layer PCB stackups

System Architecture

Battery ↓ TPS63060 Buck-Boost Converter ↓ V_SYS_5V ├── ESP32-CAM ├── IR Illumination └── LDO Regulator ↓ V_SYS_3V3 ├── PIR Sensor └── Control Logic

Hardware Components

Main Controller

  • ESP32-CAM AI Thinker Module

Power Management

  • TPS63060 Buck-Boost Converter
  • 3.3V LDO Regulator

Motion Detection

  • PIR Sensor Module

Illumination

  • IR LEDs
  • PMOS High-Side Switching Circuit

Interfaces

  • UART Programming Header
  • MicroSD Storage

Power Architecture

The system uses a TPS63060 high-efficiency buck-boost converter to generate a regulated 5V rail from battery input.

The 5V rail supplies:

  • ESP32-CAM
  • IR illumination circuit

A secondary LDO regulator generates a 3.3V rail for:

  • PIR sensor
  • Control logic
  • MOSFET gate drive circuitry

PCB Stackup

2-Layer Version

  • Top Layer: Components and signal routing
  • Bottom Layer: Ground plane

4-Layer Version

  • Layer 1: Signal routing
  • Layer 2: Ground plane
  • Layer 3: Power plane
  • Layer 4: Signal routing

Design Tools

  • KiCad

Project Structure

Lynx-30-Camera-Trap │ ├── Documentation │ ├── Project_Report.pdf │ ├── System_Architecture.pdf │ └── Design_Notes.pdf │ ├── KiCad │ ├── Schematics │ ├── PCB │ └── Libraries │ ├── Gerbers │ ├── BOM │ └── BOM.csv │ ├── Images │ ├── PCB_Top.png │ ├── PCB_Bottom.png │ ├── PCB_3D.png │ └── System_Block_Diagram.png │ └── README.md

text
Deliverables

* Complete hierarchical schematic
* PCB layout
* BOM (Bill of Materials)
* Gerber files
* Pick-and-place files
* PCB 3D render images
* Engineering documentation

Future Improvements

* Deep sleep optimization
* Solar charging capability
* Machine learning-based object detection
* Cloud connectivity
* LoRa communication support
* Environmental sensors integration

Applications

* Wildlife monitoring
* Security surveillance
* Remote sensing

Parts

37
QtyValueFootprintReferences
6IRL81ALED_THT:LED_D5.0mmD5001, D5002, D5003, D5004, D6001, D6002
20.1uCapacitor_SMD:C_0805_2012MetricC3001, C4001
2100KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2005, C2006
268Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6001, R6002
110PCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2002
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2004
110uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2001
110uCapacitor_SMD:C_0805_2012MetricC4002
11UCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2004
12.2uHInductor_SMD:L_0805_2012MetricL2001
1220nResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2005
122nResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2002
147uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2003
1900KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2002
1AO3401APackage_TO_SOT_SMD:SOT-23Q2001
1Battery_CellTerminalBlock_MetzConnect:TerminalBlock_MetzConnect_360410_1x01_Horizontal_ScrewM3.0BT2001
1Conn_01x05_PinConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ3002
1ESP32-CAMkicad new model:ESP32-CAMU3001
1LOGOLOGOG***
1R_USResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3001
1TPS63060Package_SON:Texas_S-PWSON-N10_ThermalViasU2003
1U_PIR_SENSORConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1LeftJ4001

The 33 most common of 37 parts.

Similar boards

  • 4 layers71 × 57.5 mmEoC Lab, the printed circuit board in 3D

    EoC Lab

    jackshisd/EoC-Lab

    ESP32-based infant wearable for audio and video data acquisition with SD storage, BLE-triggered recording, and USB mass storage support.

    85 parts2
  • 4 layers60 × 60 mmUNSW Rocketry Senior Flight Computer, the printed circuit board in 3D

    UNSW Rocketry Senior Flight Computer

    DashiellRussell/UNSW_Rocketry_Senior_Flight_Computer

    KiCad project for the senior flight computer used by UNSW Rocketry.

    132 parts
  • 2 layers119 × 92 mmClock A, the printed circuit board in 3D

    Clock A

    fluffy/blinky

    Blinking lights to tell time

    225 parts
  • 2 layers94.8 × 47.8 mmMouse v2, the printed circuit board in 3D

    Mouse v2

    lowj/fish-mouse

    Small Robot for maze navigation (Micromouse)

    77 parts5
  • 2 layers176.4 × 21.4 mmLedClock, the printed circuit board in 3D

    LedClock

    qb-creates/pov-led-clock

    POV Clock using an ATmega32 microcontroller.

    47 parts2MIT
  • 2 layers54 × 55 mmHa plattform, the printed circuit board in 3D

    Ha plattform

    alexmohr/home_automation_plattform

    PCB and schematic for my personal home automation plattform

    15 parts1
  • 4 layers76.2 × 25.4 mmCurio, the printed circuit board in 3D

    Curio

    dotcypress/curio

    Glorified Infrared Remote Control.

    31 parts1

Questions

How big is the Lynx-30-Camera Trap PCB?

It measures 78.8 × 63 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lynx-30-Camera Trap use?

37 parts, built around the ESP32-CAM, AMS1117-3.3, TPS63060DSC and IRL 81A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lynx-30-Camera Trap KiCad files?

From the Engr-umer-mohammed/Lynx-30-Camera-Trap repository on GitHub, at the commit this page was made from: the board is Lynx30_CameraTrap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lynx-30-Camera Trap design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).