Skip to the content
12345678910111213141516

ESP32-CAM

Ai-ThinkerExtended

插件 WiFi Modules ROHS

Part id
ai-thinker/ESP32-CAM
Category
WiFi Modules
Package
插件
Pins
16
In stock
0 at JLCPCB (C277946)
Used on
66 open-source boards

Overview

The ESP32-CAM is a wiFi Module made by Ai-Thinker in a 插件 package with 16 pins. 插件 WiFi Modules ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ESP32-CAM, from EasyEDA) and its footprint (EasyEDA_Cloud:COMM-TH_16P-L40.0-W27.0-P2.54_ESP32-CAM, from EasyEDA), ready for a KiCad board. JLCPCB lists it (part C277946). 66 open-source boards in 56 repositories on GitHub use it.

Symbol

1IO42IO23IO144IO155IO136IO127GND85V93V310IO1611IO012GND13VCC14U0R15U0T16GND
EasyEDA_Cloud:ESP32-CAMFrom EasyEDA

Footprint

12345678910111213141516
EasyEDA_Cloud:COMM-TH_16P-L40.0-W27.0-P2.54_ESP32-CAMFrom EasyEDA

From the datasheet

9
Supply, least
5 V · 供电范围, recommended operating min · p. 2
Supply, most
5 V · 供电范围, recommended operating max · p. 2
Works from
-20 °C · Operating temperature min · p. 2
Works up to
85 °C · Operating temperature max · p. 2
Takes working
180 mA · Operating current with flash off at 5 V · p. 2
Takes at most
310 mA · Operating current with flash at maximum brightness at 5 V · p. 2
Takes asleep
6 mA · Deep-sleep current min at 5 V · p. 2
Takes asleep
20 mA · Moderm-sleep current min at 5 V · p. 2
Takes asleep
6.7 mA · Light-sleep current min at 5 V · p. 2

What it is and has

18
CPU
Low-power dual-core 32-bit CPU · p. 1
CPU clock and performance
Up to 240MHz, up to 600 DMIPS · p. 1
RAM
Internal 520KB + external 4M PSRAM · p. 2
SPI Flash
Default 32Mbit · p. 2
Interfaces
UART/SPI/I2C/PWM/ADC/DAC · p. 1
Camera support
OV2640 and OV7670; built-in flash · p. 1
Bluetooth
4.2 BR/EDR and BLE · p. 2
Wi-Fi
802.11 b/g/n/e/i · p. 2
TF card
Up to 4G · p. 2
IO
9 · p. 2
Image output formats
JPEG (OV2640 only), BMP, GRAYSCALE · p. 2
Antenna
Onboard PCB antenna, 2dBi gain · p. 2
Security
WPA/WPA2/WPA2-Enterprise/WPS · p. 2
Package
DIP-16 · p. 2
Software
Lwip and FreeRTOS · p. 1
Wi-Fi operating modes
STA/AP/STA+AP · p. 1
Provisioning
Smart Config/AirKiss · p. 1
Firmware update
Local serial update and remote FOTA · p. 1

Specifications

23
ParameterConditionsAs printedPage
SPI Flash默认typ 32 Mbit2
支持 TF 卡max 4 G2
IO 口typ 9 个2
串口速率默认typ 115200 bps2
频谱范围min 2412 · max 2484 MHz2
天线形式板载 PCB 天线; 增益typ 2 dBi2
发射功率802.11b, @11Mbps; ±2 dBmtyp 17 dBm2
发射功率802.11g, @54Mbps; ±2 dBmtyp 14 dBm2
发射功率802.11n, @MCS7; ±2 dBmtyp 13 dBm2
接收灵敏度CCK, 1 Mbpstyp -90 dBm2
接收灵敏度CCK, 11 Mbpstyp -85 dBm2
接收灵敏度6 Mbps (1/2 BPSK)typ -88 dBm2
接收灵敏度54 Mbps (3/4 64-QAM)typ -70 dBm2
接收灵敏度MCS7 (65 Mbps, 72.2 Mbps)typ -67 dBm2
功耗关闭闪光灯; 5Vtyp 180 mA2
功耗开启闪光灯并且亮度调到最大; 5Vtyp 310 mA2
功耗Deep-sleep; 5Vmin 6 mA2
功耗Moderm-sleep; 5Vmin 20 mA2
功耗Light-sleep; 5Vmin 6.7 mA2
供电范围Single stated supply voltagetyp 5 V2
工作温度min -20 · max 85 ℃2
存储环境< 90%RHmin -40 · max 90 ℃2
重量typ 10 g3

Open-source boards using it

66See all 66
  • 2 layers38.1 × 63.5 mmSstv backpack, the printed circuit board in 3D

    Sstv backpack

    vaugerbird/sstv-backpack

    A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!

    29 parts94GPL-2.0
  • 2 layers146.2 × 99 mmFPVRover, the printed circuit board in 3D

    FPVRover

    Circuit-Digest/ESP32-Cam-Surveillance-Car

    Watch full video on ESP32 surveillance car

    35 parts15
  • 2 layers78 × 62 mmPortier connecte, the printed circuit board in 3D

    Portier connecte

    InnoGreenTech/ESP32-CAM-pir-static-relay

    ESP32-CAM mounting on a board with pir, photo-resistor sensors, AC/DC power and a static relay.

    16 parts5
  • 2 layers188.2 × 129.7 mmQms kiosk, the printed circuit board in 3D

    Qms kiosk

    jamestansx/qms

    Queue Management System

    10 parts5
  • 2 layers82.3 × 43.5 mmNight Gogle, the printed circuit board in 3D

    Night Gogle

    airsoftak25/Night-Gogle

    My small project about creating a Night vision gogle witch cost less than 2000CZK each

    29 parts2
  • 2 layers82 × 58 mmNoirShot, the printed circuit board in 3D

    NoirShot

    rabinniroula/NoirShot

    instant thermal camera

    50 parts2
  • 2 layers53.8 × 34 mmPCBcam, the printed circuit board in 3D

    PCBcam

    dipenac/camara-esp32-espidf

    - [x] Y dentro del folder de projects utilizamos una de las funciones que presta idf.py, con la cual creamos un projecto con el nombre que deseemos.

    11 parts1
  • 2 layers78.8 × 63 mmLynx-30-Camera Trap, the printed circuit board in 3D

    Lynx-30-Camera Trap

    Engr-umer-mohammed/Lynx-30-Camera-Trap

    Low-power long-range wireless camera trap designed using KiCad and Simulink.

    37 parts1MIT

Questions

Is there a KiCad symbol and footprint for the ESP32-CAM?

Yes. The symbol is EasyEDA_Cloud:ESP32-CAM and the footprint EasyEDA_Cloud:COMM-TH_16P-L40.0-W27.0-P2.54_ESP32-CAM, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ESP32-CAM?

插件, with 16 pins. Its footprint is drawn on this page.

Where is the ESP32-CAM datasheet?

Ai-Thinker publishes it: the Datasheet link on this page opens it.

Where can I order the ESP32-CAM?

JLCPCB lists it as part C277946, with 0 in stock; the sellers' links on this page open their listings.

Which open-source boards use the ESP32-CAM?

66 boards in 56 repositories on GitHub; the most starred are listed on this page, with their KiCad files.