
JBclone soldering station
Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support

ESP32-CAM mounting on a board with pir, photo-resistor sensors, AC/DC power and a static relay.
Portier connecte is an open-source printed circuit board by InnoGreenTech, from the InnoGreenTech/ESP32-CAM-pir-static-relay repository on GitHub. It is a 2-layer board of 78 × 62 mm with 16 parts on 24 nets, routed with 166 tracks and 3 vias.
It is built around the ESP32-CAM and IRM-02-5. Its parts include 4 resistors, 2 ICs, 2 connectors, 2 switches and 2 fuses. It belongs with the home automation and IoT and sensors and measurement boards and the ESP32 and RISC-V boards of this library.
This is a camera built around a ESP32-CAM. It allow to stream RTSP stream for your Video station like Synology for exemple. It have two sensors, a Pir sensor to detect mouvement and a photo-resistor to detect luminosity and control integrate flash LED. There is also a static relay to swith on a light or other actuators. It integrates a power supply.
You can found more information on my web site on this page
[I have used the great library of Kevin Hester-Chow] https://github.com/geeksville/Micro-RTSP/blob/master/README.md
I share also the drawing and the pcb in this repository.

Fork it Create your feature branch (git checkout -b my-new-feature) Commit your changes (git commit -am 'Add some feature') Push to the branch (git push origin my-new-feature) Create new Pull Request
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | Fuse | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | F1, F2 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | C | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | ESP32-CAM | RF emprunte (ESP32_CAM):ESP32-CAM | U1 |
| 1 | G3MB202PDC12 | Relay_THT:RELAY_G3MB202PDC12 | K1 |
| 1 | IRM-02-5 | Converter_ACDC:Converter_ACDC_YS100000590 | PS1 |
| 1 | Jumper_NO_Small | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | JP1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U2 |
| 1 | PIR_Motion_Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PIR1 |
| 1 | R_PHOTO | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical | R1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_P5_Angled | SW1 |
| 1 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J2 |

Minu-IU3IRR/JBclone-soldering-station
Multi channel DIY soldering station with JBC tip support


dondangp/Smart-Crib-IoT
Senior Design Capstone project (Summer/Fall 2024) - This mobile application allows users to manage their smart lights, door lock, and fan via a user-friendly interface.

johnffred/TarjetaSalidasESP32
Proyecto de control de salidas con ESP32, pantalla LCD y relés. Esquemático en KiCad.

leodk27/Reflow-oven-Custom
Reflow oven project based on custom PCB and programming


anobli/pandora-hw
Open hardware designs for user-controlled smart home devices. Zephyr RTOS + Thread/WiFi connectivity. No cloud dependency, no vendor lock-in.

csdexter/valhalla
Version-controlled material related to the Valhalla project
It measures 78 × 62 mm and has 2 copper layers, 1.6 mm thick.
16 parts, built around the ESP32-CAM and IRM-02-5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the InnoGreenTech/ESP32-CAM-pir-static-relay repository on GitHub, at the commit this page was made from: the board is schematic_and_pcb/Portier_connecte.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask InnoGreenTech before reusing the design.