
Restore backup 2026-10-15T00-06-46-763
JulCesarCorrea/Basic-EPS
PCB design para a 4 fase da obsat

PCB design para a 4 fase da obsat
Sources is an open-source printed circuit board by JulCesarCorrea, from the JulCesarCorrea/Basic-EPS repository on GitHub. It is a 2-layer board of 87.2 × 77.2 mm with 55 parts on 90 nets, routed with 417 tracks and 23 vias.
It is built around the SCT2650STER, D2F and HX TYPE-C 16PIN, with the IP2326, SS34 and SS54 among its other parts. Its parts include 21 resistors, 17 capacitors, 6 ICs, 4 diodes and 2 inductors.
A Amazônia desempenha um papel estratégico de extrema relevância global e nacional, abrigando a maior biodiversidade do planeta e recursos naturais de alto valor. Contudo, essa importância é ameaçada pela proliferação de pistas de pouso clandestinas, que funcionam como vetores para atividades ilícitas como garimpo ilegal, narcotráfico e desmatamento, comprometendo o equilíbrio ambiental, social e a soberania nacional. Estudos apontam que há mais pistas não homologadas do que oficiais na Amazônia Legal, formando uma infraestrutura paralela que impulsiona essas atividades ilegais.
Apesar dos esforços de fiscalização, o monitoramento por satélites convencionais enfrenta limitações significativas:
O satélite processa as imagens diretamente em órbita e envia alertas com dados de localização e área estimada, reduzindo custos, latência e dependência de infraestrutura terrestre. O projeto reforça a pesquisa em monitoramento ambiental com tecnologias acessíveis e contribui para o avanço da IA embarcada em CubeSats, com impacto direto na soberania e proteção da Amazônia.
A Missão Samaúma é conduzida por dois estudantes de Engenharia de Computação do Instituto Nacional de Telecomunicações (INATEL), sob orientação técnica do Prof. Evandro César Vilas Boas.
Mateus Ananias Duarte Lima Software e IA embarcada Desenvolvimento do algoritmo de detecção de pistas; implementação do sistema operacional de tempo real (RTOS); integração dos subsistemas via software.
Daniele Letícia Pereira Sousa Hardware e sistemas embarcados Projeto e implementação dos subsistemas físicos (EPS, STR, Payload, COMMS, TCS, ADCS); integração e validação de hardware.
Apesar da divisão de responsabilidades, o trabalho é conduzido de forma colaborativa e integrada, permitindo que ambos mantenham visão global do projeto e contribuam em múltiplas frentes técnicas.
A Missão Samaúma é estruturada em três etapas principais:
O algoritmo embarcado processa as imagens diretamente no computador de bordo (OBC), distinguindo áreas de desmatamento comum de pistas clandestinas, e enviando alertas automáticos com coordenadas e área estimada.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10uF | EPS_PAY-Footprints:C0805 | C1, C13, C38, C43, C46, C47 |
| 5 | 100nF | EPS_PAY-Footprints:C0603 | C3, C42, C48, C49, C50 |
| 4 | 120kΩ | EPS_PAY-Footprints:R0603 | R40, R42, R44, R48 |
| 4 | 22uF | EPS_PAY-Footprints:C1206 | C2, C9, C44, C45 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | M1, M2, M3, M4 |
| 3 | 5.1KΩ | EPS_PAY-Footprints:R0603 | R36, R41, R49 |
| 2 | 100KΩ | EPS_PAY-Footprints:R0603 | R32, R50 |
| 1 | 0.5Ω | EPS_PAY-Footprints:RES-SMD_L6.4-W3.2-R2512 | R37 |
| 1 | 100uF | EPS_PAY-Footprints:C1206 | C5 |
| 1 | 100Ω | EPS_PAY-Footprints:R0603 | R39 |
| 1 | 10KΩ | EPS_PAY-Footprints:R0603 | R15 |
| 1 | 150Ω | EPS_PAY-Footprints:R0603 | R38 |
| 1 | 1881561 | EPS_PAY-Footprints:CONN-TH_3P-P2.50_C3585554 | U12 |
| 1 | 1KΩ | EPS_PAY-Footprints:R0603 | R51 |
| 1 | 2.2uH | EPS_PAY-Footprints:L1008 | L6 |
| 1 | 200KΩ | EPS_PAY-Footprints:R0603 | R2 |
| 1 | 22KΩ | EPS_PAY-Footprints:R0603 | R3 |
| 1 | 3.3nF | EPS_PAY-Footprints:C0603 | C4 |
| 1 | 33kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R33 |
| 1 | 52.5KΩ | EPS_PAY-Footprints:R0402 | R1 |
| 1 | 55kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 6.8uH | EPS_PAY-Footprints:IND-SMD_L5.4-W5.2 | L1 |
| 1 | 60KΩ | EPS_PAY-Footprints:R0603 | R43 |
| 1 | 82kΩ | EPS_PAY-Footprints:R0402 | R52 |
| 1 | AO4407A_C2841482 | EPS_PAY-Footprints:SOP-8_L5.0-W4.0-P1.27-LS6.0-BL | U19 |
| 1 | D2F | EPS_PAY-Footprints:SW-TH_D2F-L | U18 |
| 1 | HX_TYPE-C_16PIN | EPS_PAY-Footprints:TYPE-C-SMD_HX-TYPE-C-16PIN | U16 |
| 1 | IP2326 | EPS_PAY-Footprints:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5 | U17 |
| 1 | LED_GREEN | EPS_PAY-Footprints:LED0603-FD | D2 |
| 1 | PC/104 Connector | Connector_PinSocket_2.54mm:PinSocket_2x26_P2.54mm_Vertical | H1 |
| 1 | SCT2650STER | EPS_PAY-Footprints:ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP-2 | U1 |
| 1 | SS34 | Diode_SMD:D_SMA | D9 |
| 1 | SS54 | EPS_PAY-Footprints:SMB_L4.3-W3.6-LS5.4-RD | D1 |
| 1 | USBLC6-2P6_C2827693 | EPS_PAY-Footprints:SOT-666-6_L1.6-W1.2-P0.50-LS1.6-BL | D8 |
It measures 87.2 × 77.2 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the SCT2650STER, D2F, HX TYPE-C 16PIN and IP2326. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JulCesarCorrea/Basic-EPS repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/EPS&PAY/sources/PCB.kicad_pcb and its schematic Hardware/PCB/EPS&PAY/sources/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JulCesarCorrea before reusing the design.

JulCesarCorrea/Basic-EPS
PCB design para a 4 fase da obsat




NgxLuis/30W-PD-Power-Bank
PCB design - 30W High-Performance Power Bank utilizing SW3518, IP2326, and BM3451 for a 3S 21700 battery pack.


2ah33d/esp32-power-actuator-board
Custom 2-layer ESP32 carrier with 2S LiPo boost charging (IP2326), multi-rail regulation, and high-current servo distribution in KiCad.


Prajwal-sahyadri-ECE/-Optimized-Powersupply-design-
A highly detailed PCB to maintain an power supply for a defined hardware architecture specifically for ICS system