6 layers34 × 56 mm
2 layers80 × 52 mm
VolleyBot
CausticLime1/VolleyBot- Size
- 80 × 52 mm
- Copper layers
- 2
- Thickness
- 1.61 mm
- Parts
- 110
- Nets
- 99
- Pads
- 379
- Tracks, vias
- 455, 130
- Pours
- 173
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Apr 2025
- Updated
- 18 Jan 2026
Overview
VolleyBot is an open-source printed circuit board by CausticLime1, from the CausticLime1/VolleyBot repository on GitHub. It is a 2-layer board of 80 × 52 mm with 110 parts on 99 nets, routed with 455 tracks and 130 vias.
It is built around the STM32F411CEU6, RZ7899-MS and AP62300TWU, with the IP2326, AO3401A and 1N5819WS among its other parts. Its parts include 35 capacitors, 26 resistors, 10 diodes, 8 connectors and 7 ICs. It belongs with the STM32 boards of this library.
Main components
12
STM32F411CEU6
UFQFPN-48(7x7)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 32 Bit 36 512KB ARM Cortex-M4 Built-in FLASH UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
RZ7899-MS
SOP-8Brushed DC Motor DriversMSKSEMI
AP62300TWU
TSOT-26-40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 763mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
IP2326
VQFN-24-EP(4x4)-40℃~+150℃ 1.5A 2~3 4.5V~9.5V 700nA 8.4V Charging IC、Balancing IC Support VQFN-24-EP(4x4) Battery Management ROHSINJOINICBattery Management
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
FNR5020S3R3NT
SMD,5x5mm2.7A 3.3uH 3A 56mΩ Magnetic Shielded Inductor ±30% SMD,5x5mm Power Inductors ROHScjiangPower InductorsAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
BLM18PG121SN1
0603-55℃~+125℃ 1 120Ω@100MHz 2A 50mΩ ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
FNR6045S2R2MT
SMD,6x6mm18mΩ 2.2uH 5A 7.4A Magnetic Shielded Inductor ±20% SMD,6x6mm Power Inductors ROHScjiangPower Inductors
FUET-8530H-3.6V
SMD,8.5x8.5mm-20℃~+60℃ 100mA 2.5V~4.5V 2.7kHz 3.1mm 3.6V 8.5mm 8.5mm 85dB Electromagnetic Passive (Externally Driven) Plug-in SMD,8.5x8.5mm Buzzers ROHSFUETBuzzers
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdParts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C13, C17, C18, C22, C24, C31, C34, C35, C37 |
| 8 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C12, C23, C27, C28, C32, C33 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R4, R6, R8, R21, R23, R26 |
| 6 | 22uF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C25, C26, C29, C30 |
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R12, R13, R15, R27, R28 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H5, H6, H7, H8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 100uF | Capacitor_SMD:C_1206_3216Metric | C16, C19, C36 |
| 3 | 5K1 | Resistor_SMD:R_0402_1005Metric | R2, R3, R14 |
| 3 | AO3401A | Rocketry_Easyeda:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q2, Q5 |
| 3 | Conn_01x02_Socket | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J5, J6, J7 |
| 3 | RZ7899-MS | Rocketry_Easyeda:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U2, U3, U8 |
| 3 | SS34_C8678 | Rocketry_Easyeda:SMA_L4.3-W2.6-LS5.2-RD | D1, D10, D12 |
| 3 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1, SW2, SW3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D7, D8 |
| 2 | AP62300TWU | Package_TO_SOT_SMD:TSOT-23-6 | U4, U5 |
| 2 | Conn_01x05_Socket | Connector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J2, J8 |
| 2 | FNR5020S3R3NT | Rocketry_Easyeda:IND-SMD_L5.0-W5.0_FNR50XXS | L1, L2 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 120K | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 15K | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 33K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 47K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 51K | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 7.5K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 75K | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | AO3400A | Rocketry_Easyeda:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q3 |
| 1 | C14709 | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | Conn_01x02_Socket | Connector_AMASS:AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J3 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | FNR6045S2R2MT | Rocketry_Easyeda:IND-SMD_L6.0-W6.0_FNR60XXS | L4 |
| 1 | FUET-8530H-3.6V | Rocketry_Easyeda:BUZ-SMD_4P-L8.5-W8.5_FUET-8530-05 | BUZZER1 |
| 1 | IP2326 | Rocketry_Easyeda:VQFN-24_L4.0-W4.0-P0.50-BL-EP2.5 | U7 |
| 1 | KT-603R | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | LOGO | LOGO | G*** |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | STM32F411CEU6 | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TYPE-C 16PIN 2MD(073) | Rocketry_Easyeda:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB2 |
Questions
How big is the VolleyBot PCB?
It measures 80 × 52 mm and has 2 copper layers, 1.61 mm thick.
What parts does the VolleyBot use?
110 parts, built around the STM32F411CEU6, RZ7899-MS, AP62300TWU and IP2326. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VolleyBot KiCad files?
From the CausticLime1/VolleyBot repository on GitHub, at the commit this page was made from: the board is Electrical/VolleyBot.kicad_pcb and its schematic Electrical/VolleyBot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VolleyBot design in my own project?
Its repository states no licence, so its author keeps all rights: ask CausticLime1 before reusing the design.
Similar boards
- 6 layers84.5 × 56 mm
VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3 - 4 layers63.6 × 86 mm
BECom
rjsc/BECom
BECom - Battery Emulator Companion - Open Source Hardware, designed to run dalathegreat/Battery-Emulator
276 parts2GPL-3.0 - 2 layers59 × 26 mm
Vectornav imu
formulaslug/fs-5-schematics
Electrical Design Repository for fs-5 schematics and PCBs
34 parts1 - 4 layers100 × 99.9 mm
Solar Project Rev0 - Manufactured First Build
Phil-CIA/Solar-Project-200w
Solar Project 200W is a prototype-first hardware and firmware effort for a 200W-class solar charging system built around a 4S LiFePO4 battery domain.
163 parts - 4 layers61.3 × 61.7 mm
- 2 layers50 × 110 mm
Ogham merged v1.0
keeos-io/ogham
Ogham — a dual-voice bytebeat synthesizer for Eurorack. Firmware (MIT) and hardware (CC BY-SA 4.0).
109 parts3 - 6 layers49.6 × 103 mm
Analogue board pico revb routed
Eight4aWish/eurorack_electronics
Analogue designs and breadboard layouts: the Dual Pingable LPG, and the board behind Boy.
361 parts1