Skip to the content
2 layers23 × 37 mmGlue, the printed circuit board in 3D

Homebrew Motorola 68010 computer

Size
23 × 37 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
26
Pads
72
Tracks, vias
296, 19
Routed
Yes
KiCad
KiCad 4
Created
1 Apr 2017
Updated
3 Feb 2018

Overview

Glue is an open-source printed circuit board by jtsiomb, from the jtsiomb/m68kcomputer repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 23 × 37 mm with 6 parts on 26 nets, routed with 296 tracks and 19 vias.

It is built around the 74LS32SC and 74LS04PC. Its parts include 4 ICs and 2 connectors.

Main components

2

README

README.md

Homebrew 68k computer project 1

photo

About

The purpose of this project is to design a minimal but useful homebrew computer, based on the Motorola 68010 16/32-bit processor.

The current hardware design is broken into a main processor board, and an I/O and expansion board with an AVR microcontroller playing the role of UART, timer, and RTC all in one.

Directory structure:

  • hw - hardware: kicad files and pdf schematics.
  • fw_iolite - firmware for the I/O controller.
  • monitor - ROM monitor program.

Project website: http://nuclear.mutantstargoat.com/hw/m68kcomp1

License

Copyright (C) 2017 John Tsiombikas nuclear@member.fsf.org

You are free to use, reproduce, modify, redistribute any parts of this project, provided you make any derivative work you release, freely available under the same terms.

More specifically the hardware parts of this project are released under the Creative Commons Attribution Share-Alike license (see LICENSE.hw for details), and the software/firmware parts are released under the GNU General Public License v3, or later (see LICENSE.sw for details).

Parts

6
QtyValueFootprintReferences
374LS32Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU2, U3, U4
2CONN_01X08Pin_Headers:Pin_Header_Straight_1x08P1, P2
174LS04Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU1

More from jtsiomb/m68kcomputer

3
  • 2 layers159.5 × 99.8 mmM68kcomp1, the printed circuit board in 3D

    M68kcomp1

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    55 parts32CC-BY-SA-4.0
  • 2 layers149 × 100 mmIolite, the printed circuit board in 3D

    Iolite

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    51 parts32CC-BY-SA-4.0
  • 2 layers142 × 100 mmM68kcomputer, the printed circuit board in 3D

    M68kcomputer

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    43 parts32CC-BY-SA-4.0

Similar boards

  • 2 layers237.5 × 102.9 mmInstruction, the printed circuit board in 3D

    Instruction

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    112 parts301Unlicense
  • 2 layers370.8 × 298.5 mm8 Bit Computer, the printed circuit board in 3D

    8 Bit Computer

    The-Invent0r/8-bit-Computer-PCB

    These are the KiCAD files for my 8-Bit Computer.

    323 parts142
  • 2 layers134.6 × 208.3 mmTs2, the printed circuit board in 3D

    Ts2

    jefftranter/68000

    Code related to the Motorola 68000 microprocessor.

    110 parts133
  • 2 layers114.3 × 106.7 mmXt ide, the printed circuit board in 3D

    Xt ide

    glitchwrks/xt_ide

    XT-IDE 8-Bit IDE Controller

    46 parts126GPL-3.0
  • 2 layers407 × 184 mmTRS-80-Model I G E1, the printed circuit board in 3D

    TRS-80-Model I G E1

    RetroStack/TRS-80-Model-I-G-E1

    Hardware Replica of the TRS-80 Model I Revision G

    230 parts57MIT
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56
  • 2 layers350 × 224.3 mmConsole, the printed circuit board in 3D

    Console

    danwerner21/TI99_22

    a 2022 replica of the classic TI/994a, using obtainable parts

    251 parts50
  • 2 layers100 × 100 mmFloppyExerciser, the printed circuit board in 3D

    FloppyExerciser

    schlae/FloppyExerciser

    Simple tool for testing and repairing floppy drives

    118 parts47

Questions

How big is the Glue PCB?

It measures 23 × 37 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Glue use?

6 parts, built around the 74LS32SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Glue KiCad files?

From the jtsiomb/m68kcomputer repository on GitHub, at the commit this page was made from: the board is hw/glue.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Glue design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).