Skip to the content
2 layers20.3 × 58.4 mmMSPY FR2355, the printed circuit board in 3D

Dev board based on the MSP430FR2355 MCU from TI

Size
20.3 × 58.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
51
Pads
120
Tracks, vias
340, 7
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Oct 2021
Updated
18 Oct 2021

Overview

MSPY FR2355 is an open-source printed circuit board by jrmcauliffe, from the jrmcauliffe/MSPY-FR2355 repository on GitHub. It is a 2-layer board of 20.3 × 58.4 mm with 12 parts on 51 nets, routed with 340 tracks and 7 vias.

It is built around the MSP430FR2355TPT. Its parts include 5 capacitors, 3 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the MSP430 boards of this library.

Main components

1

Parts

12
QtyValueFootprintReferences
2CCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC4, C5
2Conn_01x23Connector_PinHeader_2.54mm:PinHeader_1x23_P2.54mm_VerticalJ1, J2
10.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC1
110uFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC3
11nFCapacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolderC2
147kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ3
1Crystal_GND24Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mmY1
1MSP430FR2355TPTPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H5mmSW1

Similar boards

  • 4 layers90 × 90 mmRF Board, the printed circuit board in 3D

    RF Board

    jbrown3859/EE175-SeniorDesign

    CubeSat Flight Computer and Radio - EE175 Senior Design F22

    130 parts3
  • 2 layers63.5 × 78.7 mmMonitor PCB, the printed circuit board in 3D

    Monitor PCB

    AkilaA25/Spoilage-Monitor_PCB

    Battery-powered PCB that detects food spoilage in a fridge using a BME680 (VOC/humidity) and SCD40 (CO₂) sensor pair, an MSP430FR2355 MCU, and an IoT module header for phone connectivity.

    60 parts1
  • 4 layers38 × 35 mmRemex v4, the printed circuit board in 3D

    Remex v4

    Montana-Tech-NRMC/remex

    23 parts1
  • 2 layersPlan, the printed circuit board in 3D

    Plan

    runariel/Fuzzy_Car

    Planing to make a self driving car by Arduino

    67 parts1
  • 2 layers63.5 × 78.7 mmComplete PCB, the printed circuit board in 3D

    Complete PCB

    ahmedaltell1/MCU-Power-Board

    Custom MSP430-based PCB integrating regulated power delivery, sensor interfaces, ultrasonic water-level detection, and IoT communication modules.

    69 parts
  • 2 layers63.5 × 78.7 mmProject 06, the printed circuit board in 3D

    Project 06

    lucadaloia/MSP430-LDR_ECE492

    This project involved the design and manufacturing of a microcontroller-based system focused on analog signal acquisition and real-time user interaction.

    61 partsMIT
  • 2 layers75 × 80.2 mmPCB MiSE, the printed circuit board in 3D

    PCB MiSE

    ManuelArgibay/PCB-RC-Car-Project

    PCB diseñada para la asignatura de Microcontroladores i Sistemes Empotrats (MiSE) de la Universitat de Barcelona. El diseño fue realizado íntegramente en KiCad, incluyendo esquemático, layout y exportación de Gerbers.

    39 parts

Questions

How big is the MSPY FR2355 PCB?

It measures 20.3 × 58.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MSPY FR2355 use?

12 parts, built around the MSP430FR2355TPT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MSPY FR2355 KiCad files?

From the jrmcauliffe/MSPY-FR2355 repository on GitHub, at the commit this page was made from: the board is MSPY-FR2355.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the MSPY FR2355 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jrmcauliffe before reusing the design.