2 layers
2 layers17 × 19 mm
328RFStamp
jp112sdl/328RFStamp8328RFStamp - Miniplatine für CC1101 und 328P
- Size
- 17 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 31
- Pads
- 68
- Tracks, vias
- 210, 20
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Oct 2019
- Updated
- 12 Jan 2022
Overview
328RFStamp is an open-source printed circuit board by jp112sdl, from the jp112sdl/328RFStamp repository on GitHub. It is a 2-layer board of 17 × 19 mm with 20 parts on 31 nets, routed with 210 tracks and 20 vias.
It is built around the ATMEGA328P-AU and CC1101RGP. Its parts include 12 connectors, 4 capacitors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs
README
README.md328RFStamp
universelle Trägerplatine für ein CC1101 Funkmodul und einen ATmega328P in kleinstmöglicher Abmessung.
- ISP Anschluss erfolgt über die Pins des CC1101.
- FTDI Pins sind 2mm-RM!
Parts
| Anzahl | Ref | Typ | Bezeichnung |
|---|---|---|---|
| 1 | U1 | AVR | ATMega 328P-AU |
| 1 | IC1 | RF-Module | CC1101 |
| 1 | R1 | Widerstand 10k | RND 0805 10k |
| 1 | R2 | Widerstand 330 | RND 0805 330 |
| 3 | C1, C2, C4 | Kondensator 100n | X7R-G0805 100N |
| 1 | C3 | Kondensator Tantal 10µ | T491B 10U 16 |
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4 |
| 1 | + | TestPoint:TestPoint_Pad_D1.5mm | J8 |
| 1 | - | TestPoint:TestPoint_Pad_D1.5mm | J9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 14 | TestPoint:TestPoint_Pad_D1.0mm | J11 |
| 1 | 15 | TestPoint:TestPoint_Pad_D1.0mm | J13 |
| 1 | 22µ | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C3 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 4 | TestPoint:TestPoint_Pad_D1.5mm | J5 |
| 1 | 5 | TestPoint:TestPoint_Pad_D1.5mm | J1 |
| 1 | 6 | TestPoint:TestPoint_Pad_D1.5mm | J6 |
| 1 | 7 | TestPoint:TestPoint_Pad_D1.5mm | J2 |
| 1 | 8 | TestPoint:TestPoint_Pad_D1.5mm | J3 |
| 1 | 9 | TestPoint:TestPoint_Pad_D1.5mm | J4 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | CC1101 | Connector_PinHeader_2.00mm:PinHeader_1x08_P2.00mm_Vertical | IC1 |
| 1 | FTDI | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J7 |
| 1 | RST | TestPoint:TestPoint_Pad_D1.5mm | J10 |
Similar boards
- 2 layers51 × 61 mm
- 2 layers49.5 × 45 mm
- 2 layers20 × 40 mm
HM LC SW1-BA PCB mini MAX1724
der-pw/HM-LC-SW1-BA-PCB_mini_MAX1724
AskSin++ Batterieaktor mit MAX1724 Stepup
30 parts6 - 2 layers200.8 × 100.3 mm
- 2 layers17.8 × 24 mm
HM LC Sw1-Pl DN R1 OBII
der-pw/HM-LC-Sw1-Pl-DN-R1_OBII
Dieses Werk ist lizenziert unter einer Creative Commons Namensnennung - Nicht-kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International Lizenz.
9 parts3 - 2 layers32.4 × 16.4 mm
- 2 layers53.1 × 26.9 mm
HM LC Bl1-FM DC
stan23/HM-LC-Bl1-FM-DC
Nachbau HM-LC-Bl1-FM Rollladenaktor für Gleichstrommotoren (z.B. Plissee)
32 parts2
Questions
How big is the 328RFStamp PCB?
It measures 17 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 328RFStamp use?
20 parts, built around the ATMEGA328P-AU and CC1101RGP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 328RFStamp KiCad files?
From the jp112sdl/328RFStamp repository on GitHub, at the commit this page was made from: the board is 328RFStamp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 328RFStamp design in my own project?
Its repository states no licence, so its author keeps all rights: ask jp112sdl before reusing the design.