
Blinky bowtie
joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021

Slides and Design Files for BSides Canberra 2021
Module pcb is an open-source printed circuit board by joshajohnson, from the joshajohnson/bsidescbr2021 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 29 parts on 16 nets, routed with 192 tracks and 25 vias.
It is built around the 0805ZD104KAT2A and WS2812B. Its parts include 12 capacitors, 12 diodes and 2 connectors.
Slides and Design Files for BSides Canberra 2021
slides-ehd slides for my "Electronic Hardware Design" talk.pcb-ehd design files for my "Electronic Hardware Design" talk.
pcb-ehd/integrated-pcb is the fully integrated bow tie.pcb-ehd/module-pcb is the circular PCB using a Feather and microphone breakout.pcb-ehd/parts-lib are custom footprints used in the above projects.pcb-sao-magpie design files for the Magpie SAO.NOTE: Both of the pcb-ehd projects have major issues with footprints and layout. DO NOT manufacture these designs. The Magpie SAO can however be manufactured if desired.
The pcb-ehd files require a recent KiCad Nightly build to open, whereas the SAO can be opened in KiCad 5.
In each of the project folders, you will find the below files:
proj.kicad_pro is the overall KiCad project (.pro for V5).proj.kicad_sch is the schematic (.sch for V5).proj.kicad_pcb is the physical layout.outputs/schematic.pdf is a PDF of the schematic.outputs/assembly.html is a "Human Pick and Place" file which will help you hand assemble the board.outputs/bom.csv is the bill of materials required to populate the boards. I have not fully specified the resistors and capacitors for the integrated PCB.| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 12 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 2 | M5 | MountingHole:MountingHole_5mm | H1, H2 |
| 1 | Feather | ehd:featherwing | J2 |
| 1 | JMP3 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | Mic-Breakout | ehd:Mic-Breakout | J1 |

joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021


M4a1x/nmr-spectrometer
My master thesis at D-CHAB (ETH Zürich) - Building a 25MHz NMR spectrometer

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)


29 parts, built around the 0805ZD104KAT2A and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joshajohnson/bsidescbr2021 repository on GitHub, at the commit this page was made from: the board is pcb-ehd/module-pcb/module-pcb.kicad_pcb and its schematic pcb-ehd/integrated-pcb/blinky-bowtie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).