2 layers60.5 × 43.4 mm
2 layers41.7 × 58.7 mm
Biot node
jonkster/biot2Refactored BIOT system code
- Size
- 41.7 × 58.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 23
- Pads
- 66
- Tracks, vias
- 155, 5
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Mar 2017
- Updated
- 24 May 2018
Overview
Biot node is an open-source printed circuit board by jonkster, from the jonkster/biot2 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 41.7 × 58.7 mm with 17 parts on 23 nets, routed with 155 tracks and 5 vias.
It is built around the ATSAMR21B18-MZ210PA and LP2985-33DBV. Its parts include 5 connectors, 2 capacitors, 2 resistors, 2 ICs and 2 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
2ATSAMR21B18-MZ210PA
--1dBm -40℃~+125℃ 11.8mA 13.8mA 2.4GHz 2.7V~3.6V Integrated temperature sensor、Integrated antenna、AES encryption、Integrated balun On-board PCB Antenna SPI、UART - RF Modules ROHSMicrochip TechnologyRF Modules
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
READMEBiotz2
This is a new implementation of Biotz stuff - based on lessons learnt from first Biotz project (see ../biotz)
NB when commiting changes to RIOT do: git push originNew ('git push' will try and push to the real RIOT repository and you will be refused).
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 20mA | LEDs:LED_1206 | D1, D2 |
| 2 | 68 | Resistors_SMD:R_1210 | R1, R2 |
| 1 | 1uF | Capacitors_SMD:C_1206 | C1 |
| 1 | 4.7uF | Capacitors_SMD:C_1206 | C2 |
| 1 | ATMEL-CORTEX | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J4 |
| 1 | ATSAMR21B18-MZ210PA | atsamr21:ATSAMR21B18-MZ210PA | U1 |
| 1 | Battery | atsamr21:varta3v200h | 3.6VNiMH1 |
| 1 | FTDI/Serial | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm_SMD_Pin1Right | P1 |
| 1 | LP2985-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | MPU9250 connection | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J2 |
| 1 | SW_Reset | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | on/off | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Right | J3 |
| 1 | test points | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Right | J1 |
The 15 most common of 17 parts.
Questions
How big is the Biot node PCB?
It measures 41.7 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Biot node use?
17 parts, built around the ATSAMR21B18-MZ210PA and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Biot node KiCad files?
From the jonkster/biot2 repository on GitHub, at the commit this page was made from: the board is hardware/biot-node.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Biot node design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from jonkster/biot2
1Similar boards
- 2 layers100 × 100 mm
- 2 layers53.2 × 34.5 mm
- 2 layers50.5 × 128.5 mm
- 2 layers36.5 × 56 mm
- 2 layers135 × 100 mm
Z80vga
anjennings/Tom80
2B is the "definitive" version so all code going forward is designed for that version of the board. Minor hardware differences mean that code for 2.0 may not work on 2.0B without tweaks (mostly related to ram banking)
53 parts94MIT - 4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0 - 4 layers58.4 × 101.9 mm
Up5k osc
emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.
137 parts36MIT - 2 layers160 × 112 mm
