

Utility board
Refactored BIOT system code
- Size
- 60.5 × 43.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 12
- Pads
- 45
- Tracks, vias
- 111, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Mar 2017
- Updated
- 24 May 2018
Overview
Utility board is an open-source printed circuit board by jonkster, from the jonkster/biot2 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 60.5 × 43.4 mm with 8 parts on 12 nets, routed with 111 tracks and 0 vias.
It is built around the L7805. Its parts include 5 connectors, 1 resistor, 1 IC and 1 switch.
Main components
1README
READMEBiotz2
This is a new implementation of Biotz stuff - based on lessons learnt from first Biotz project (see ../biotz)
NB when commiting changes to RIOT do: git push originNew ('git push' will try and push to the real RIOT repository and you will be refused).
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 3.2K | Resistors_SMD:R_1210 | R1 |
| 1 | ATMEL-CORTEX | Pin_Headers:Pin_Header_Straight_2x05_Pitch1.27mm_SMD | J3 |
| 1 | External Charge Power | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm_SMD_Pin1Right | J4 |
| 1 | FTDI/Serial | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm_SMD_Pin1Right | P1 |
| 1 | Interface | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm_SMD | J1 |
| 1 | L7805 | TO_SOT_Packages_SMD:TO-263-3_TabPin2 | U1 |
| 1 | SW_Reset | Buttons_Switches_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | test points | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm_SMD_Pin1Right | J2 |
More from jonkster/biot2
1- 2 layers41.7 × 58.7 mm

Similar boards
- 2 layers40.6 × 110 mm

Europi surface mount
Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico
92 parts584CC0-1.0 - 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers59.7 × 57.5 mm

- 2 layers90.8 × 35.6 mm

ERCF easy brd
Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode
28 parts195GPL-3.0 - 2 layers111.3 × 106.4 mm

Super Sixteen v1
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
141 parts171 - 2 layers91.4 × 71.1 mm

Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers144.1 × 182.2 mm

SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0 - 2 layers106.1 × 155 mm

Motherboard
Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
84 parts94
Questions
How big is the Utility board PCB?
It measures 60.5 × 43.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Utility board use?
8 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Utility board KiCad files?
From the jonkster/biot2 repository on GitHub, at the commit this page was made from: the board is hardware/utility-board/utility-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Utility board design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).