

Biot node 1.0
Code for simple biot nodes.
- Size
- 53.2 × 34.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 43
- Pads
- 98
- Tracks, vias
- 207, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Apr 2016
- Updated
- 30 Oct 2016
Overview
Biot node 1.0 is an open-source printed circuit board by jonkster, from the jonkster/biot repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.2 × 34.5 mm with 23 parts on 43 nets, routed with 207 tracks and 10 vias.
It is built around the ATSAMR21B18-MZ210PA, MPU-9250 and MBRA140. Its parts include 6 capacitors, 5 connectors, 4 resistors, 3 diodes and 2 ICs. It belongs with the SAM D and SAM boards of this library.
Main components
3ATSAMR21B18-MZ210PA
--1dBm -40℃~+125℃ 11.8mA 13.8mA 2.4GHz 2.7V~3.6V Integrated temperature sensor、Integrated antenna、AES encryption、Integrated balun On-board PCB Antenna SPI、UART - RF Modules ROHSMicrochip TechnologyRF ModulesMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersMBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdExperimental code for a sensor network using ATMEL atsamr21g microcontrollers.
#About Biotz
Biotz nodes are small devices that gather and relay data about where they are physically located (eg their orientation in space, current movement etc). A group of Biotz nodes can be joined into a network and can provide information about complex movements of an assembly of parts.
For example, a human body may be considered as an assembly of various limbs. If a number of Biotz nodes are attached to locations around the body, the movement of the limbs can be monitored or recorded.
The prototype Biotz nodes were initially implemented using ATSAMR21ZLL-EK and ATSAMR21-XPRO boards, the latest version uses an ATSAMR21B-MZ210PA module and MPU9250 IMU device.
The nodes run a forked version of RIOT OS (see https://github.com/RIOT-OS/RIOT for the 'real' RIOT not my hacked up one). My forked version is at https://github.com/jonkster/RIOT and is forked to allow me to support the (currently) unsupported ATSAMR21ZLL-EK boards, the ATSAMR21B-MZ210PA module and the MPU9250 IMU device and also some customised bits I have added to the ATSAMR21-XPRO boards. NB the coding standard for my changes is not production quality and shouldn't be pushed back into the 'real' RIOT without significant refactoring - my stuff is prototype/proof of concept only!).
The nodes communicate using 6lowPAN with an edge router (currently an ATSAMR21-ZLLK board with a SLIP network interface to the wider network). The edge router is the root of a number of Biotz sensor devices.
This stuff is very experimental and a work in progress. Code quality (my code anyway) ranges from crap to even worse. You have been warned. :)
Current Structure
├── biot-applications
│ ├── biot - the sensor node code for the ZLL-EK and XPRO boards
│ ├── router - the edge router code
│ ├── modules - components common to the router and sensor nodes
│ └── utils - some stuff to assist flashing and working with the boards (cruddy but handy)
├── biot-broker - a nodejs based web service run on the PC that provides information on the Biotz network to other applications
└── biot-interface - a browser based user interface to the Biotz network
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitors_SMD:C_1206 | C3, C4 |
| 2 | 39R | Resistors_SMD:R_1210 | R3, R4 |
| 2 | Red | LEDs:LED_1206 | D1, D2 |
| 1 | 1.5V | atmelSAM:AAA_x1_Battery_Holder | BT1 |
| 1 | 100nF | Capacitors_SMD:C_1206 | C2 |
| 1 | 10k | Resistors_SMD:R_1210 | R1 |
| 1 | 10nF | Capacitors_SMD:C_1206 | C1 |
| 1 | 10uF | Capacitors_SMD:C_1206 | C6 |
| 1 | 330R | Resistors_SMD:R_1210 | R2 |
| 1 | 47uH | Inductors:Inductor_1212 | L1 |
| 1 | 68uF | Capacitors_SMD:C_1206 | C5 |
| 1 | ATSAMR21B18-MZ210PA | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.00mm | P1 |
| 1 | Cortex Header | atmelSAM:ATMEL_cortex_header_smd | P4 |
| 1 | FTDI | Pin_Headers:Pin_Header_Straight_1x06 | P3 |
| 1 | MBRA140 | Diodes_SMD:DO-214AB | D3 |
| 1 | MCU Test Points | Pin_Headers:Pin_Header_Straight_1x05 | P2 |
| 1 | MPU-9250 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U1 |
| 1 | NCP1402 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | ON/OFF | Pin_Headers:Pin_Header_Straight_1x03 | P5 |
| 1 | SPST | Buttons_Switches_SMD:SW_SPST_EVPBF | SW1 |
More from jonkster/biot
2- 2 layers98 × 84.1 mm

- 2 layers72 × 29 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers41.7 × 58.7 mm

- 2 layers49.9 × 39.4 mm

ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers35.6 × 66.5 mm

- 2 layers73.1 × 87.8 mm

- 2 layers68.6 × 53.3 mm

- 2 layers91 × 154.9 mm

- 2 layers

Questions
How big is the Biot node 1.0 PCB?
It measures 53.2 × 34.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Biot node 1.0 use?
23 parts, built around the ATSAMR21B18-MZ210PA, MPU-9250 and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Biot node 1.0 KiCad files?
From the jonkster/biot repository on GitHub, at the commit this page was made from: the board is hardware/biot_node_1.0/kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Biot node 1.0 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).