
ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD

Lipo Charger is an open-source printed circuit board by CrockerC, from the CrockerC/Lipo-Charger repository on GitHub. It is a 2-layer board with 18 parts on 14 nets, routed with 98 tracks and 0 vias.
It is built around the MBRA140. Its parts include 6 connectors, 4 resistors, 4 diodes, 2 capacitors and 1 IC. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J5, J6 |
| 2 | Conn_01x02_Female | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J3, J4 |
| 2 | MBRA140 | Diode_SMD:D_SOD-123F | D1, D2 |
| 1 | 1.7uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 2k | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 330 | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 4.7uF | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder | C2 |
| 1 | DNP | LED_SMD:LED_0201_0603Metric | D3 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | POWER_JACKSMD | Connector_BarrelJack:BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 1 | PROG | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | RED | LED_SMD:LED_0201_0603Metric | D4 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J2 |

whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD







18 parts, built around the MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CrockerC/Lipo-Charger repository on GitHub, at the commit this page was made from: the board is LipoCharger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CrockerC before reusing the design.