

BNO085
KiCad project files for a BNO085 breakout board.
- Size
- 28.6 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 33
- Pads
- 90
- Tracks, vias
- 197, 28
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 2 Mar 2026
- Updated
- 2 Mar 2026
Overview
BNO085 is an open-source printed circuit board by jo5huajohn, from the jo5huajohn/BNO085-PCB repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 28.6 × 25 mm with 25 parts on 33 nets, routed with 197 tracks and 28 vias.
It is built around the BNO08X. Its parts include 10 resistors, 5 capacitors, 3 connectors, 1 IC and 1 diode.
Main components
1README
README.mdBNO085 Breakout Board
Built using KiCad.
PCB

Schematic

3D Renders
Front Render
Back Render
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5, R6, R9, R10 |
| 4 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7, R8 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | BNO08X | IMU:BNO08X_LGA | U1 |
| 1 | COMM PROTOCOL SELECT | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | I2C ADDR | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | I2C PUPR | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | LEFT CONN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | RESET SWITCH | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | RIGHT CONN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | SPI WAKE | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
Similar boards
- 2 layers37 × 37 mm

- 2 layers

Bioin tacto bno08x
thiagoeustakio/bioin_tacto
This repository include all design files and source code for the sensing module describe in "BioIn-Tacto: A compliant multi-modal tactile sensing module for robotic tasks".
11 parts5GPL-3.0 - 2 layers30 × 30 mm

- 2 layers30 × 60 mm

SlimeVR
R-Josef/SlimeVR-Hardware
This is a SlimeVR hardware project, including a PCB file and case models.
10 parts2 - 2 layers

- 2 layers114.3 × 114.3 mm

- 2 layers56.6 × 56.4 mm

- 2 layers159.5 × 30 mm

Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
25 parts3kApache-2.0
Questions
How big is the BNO085 PCB?
It measures 28.6 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BNO085 use?
25 parts, built around the BNO08X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BNO085 KiCad files?
From the jo5huajohn/BNO085-PCB repository on GitHub, at the commit this page was made from: the board is BNO085.kicad_pcb and its schematic BNO085.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BNO085 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).