2 layers37 × 37 mm
2 layers114.3 × 114.3 mm
PCB Sensor
Greatreyhan/Sensor_AGV_PCB- Size
- 114.3 × 114.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 84
- Pads
- 219
- Tracks, vias
- 448, 26
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jan 2024
- Updated
- 24 Jan 2024
Overview
PCB Sensor is an open-source printed circuit board by Greatreyhan, from the Greatreyhan/Sensor_AGV_PCB repository on GitHub. It is a 2-layer board of 114.3 × 114.3 mm with 54 parts on 84 nets, routed with 448 tracks and 26 vias.
It is built around the DHT22, 74HC595 and AMS1117-5.0, with the BNO08X among its other parts. Its parts include 30 connectors, 6 capacitors, 6 resistors, 4 diodes and 4 switches. It belongs with the sensors and measurement boards and the ESP8266 boards of this library.
Main components
4
DHT22
插件-40℃~+80℃ 3.3V 5%RH~99%RH 500uA ±3%RH 插件 Temperature and Humidity Sensor ROHSHAIGUTemperature And Humidity Sensor
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BNO08X
LGA-28(3.8x5.2)LGA-28(3.8x5.2) New Arrivals ROHSCEVAUncategorised
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R5, R6 |
| 4 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4, C5, C6 |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C1, C2 |
| 2 | 5K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3 |
| 1 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | ALERT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BATTMCU | XT60:AMASS_XT60-M | J6 |
| 1 | BLED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | BLLED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | BNO08X | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | BTN1 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | BTN2 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | BTN3 | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | BlackPill_STLINK | kicad_blackpill-main:BlackPill_STLINK | U1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | COM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | CURRENTSENSOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | DHT22 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | DRV_A | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | DRV_B | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J16 |
| 1 | DRV_C | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J17 |
| 1 | DRV_D | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J18 |
| 1 | DRV_ENCA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J23 |
| 1 | DRV_ENCB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J24 |
| 1 | DRV_ENCC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J25 |
| 1 | DRV_ENCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J26 |
| 1 | ENCA | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J27 |
| 1 | ENCB | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J29 |
| 1 | ENCC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J28 |
| 1 | ENCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J30 |
| 1 | ESP01A | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | ESP01B | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | GLED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | LCDDATA | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J12 |
| 1 | LCDTOUCH | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J13 |
| 1 | LOADCELL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | MTR_A | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J19 |
| 1 | MTR_B | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J20 |
| 1 | MTR_C | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J21 |
| 1 | MTR_D | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J22 |
| 1 | PRGM | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | RLED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW4 |
| 1 | UWB | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J11 |
| 1 | VOLTSENSOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers
Bioin tacto bno08x
thiagoeustakio/bioin_tacto
This repository include all design files and source code for the sensing module describe in "BioIn-Tacto: A compliant multi-modal tactile sensing module for robotic tasks".
11 parts5GPL-3.0 - 2 layers30 × 30 mm
- 2 layers30 × 60 mm
SlimeVR
R-Josef/SlimeVR-Hardware
This is a SlimeVR hardware project, including a PCB file and case models.
10 parts2 - 2 layers
- 2 layers28.6 × 25 mm
- 2 layers56.6 × 56.4 mm
- 2 layers99.5 × 99.5 mm
ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT
Questions
How big is the PCB Sensor PCB?
It measures 114.3 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB Sensor use?
54 parts, built around the DHT22, 74HC595, AMS1117-5.0 and BNO08X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Sensor KiCad files?
From the Greatreyhan/Sensor_AGV_PCB repository on GitHub, at the commit this page was made from: the board is PCB_Sensor.kicad_pcb and its schematic PCB_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Greatreyhan before reusing the design.