2 layers25.9 × 13.5 mm
2 layers
Movement tracker
evolutek/movement-tracker- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 71
- Pads
- 253
- Tracks, vias
- 586, 94
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Sep 2023
- Updated
- 30 Mar 2026
Overview
Movement tracker is an open-source printed circuit board by evolutek, from the evolutek/movement-tracker repository on GitHub. It is a 2-layer board with 61 parts on 71 nets, routed with 586 tracks and 94 vias.
It is built around the MCP2551-I/SN-HG, BNO08X and 150121YV74000. Its parts include 25 capacitors, 11 resistors, 6 diodes, 5 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Main components
3
MCP2551-I/SN-HG
SOP-8SOP-8 CAN Transceivers ROHSHGSEMICAN Transceivers
BNO08X
LGA-28(3.8x5.2)LGA-28(3.8x5.2) New Arrivals ROHSCEVAUncategorised
150121YV74000
1210130° 2V 40mcd、120mcd 570nm、590nm 572nm、595nm Water Clear Yellow, Emerald Green 1210 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C8, C9, C11, C13, C16, C18, C20, C21, C23 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C14, C15, C19, C22 |
| 4 | 510 | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C12 |
| 3 | D | Diode_SMD:D_SOD-523 | D1, D2, D6 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C24, C25 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_3x5.4 | C1 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 150121YV74000 | ComponentsEvo:WL-SBCW_1210 | D4 |
| 1 | 16 MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | 32.768 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 435431019840 | ComponentsEvo:435431019840 | SW1 |
| 1 | 470pF | Capacitor_SMD:C_0603_1608Metric | C17 |
| 1 | BNO08x | ComponentsEvo:BNO085 | U5 |
| 1 | Bus Actuators | ConnectorsEvo:690367281076 | J2 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D5 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | LOGO | ComponentsEvo:logo-evo-micro | G*** |
| 1 | MCP2551-I-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NCP718xSN330 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | PAA5163E1 | ComponentsEvo:PAA5163E1 | U4 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | STLINK | ConnectorsEvo:62701420621 | J3 |
| 1 | STM32G491KEUx | ComponentsEvo:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm-Without thermal pad | U3 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | USB_B_Mini | ConnectorsEvo:651005136421 | J1 |
| 1 | ~ | MarkingEvo:CAN ID lablel | LB1 |
More from evolutek/movement-tracker
4- 2 layers24.6 × 13.5 mm
- 2 layers24.6 × 13.5 mm
- 2 layers18.6 × 13.5 mm
Similar boards
- 2 layers37 × 37 mm
- 2 layers
Bioin tacto bno08x
thiagoeustakio/bioin_tacto
This repository include all design files and source code for the sensing module describe in "BioIn-Tacto: A compliant multi-modal tactile sensing module for robotic tasks".
11 parts5GPL-3.0 - 2 layers30 × 30 mm
- 2 layers30 × 60 mm
SlimeVR
R-Josef/SlimeVR-Hardware
This is a SlimeVR hardware project, including a PCB file and case models.
10 parts2 - 2 layers114.3 × 114.3 mm
- 2 layers28.6 × 25 mm
- 2 layers56.6 × 56.4 mm
- 4 layers100 × 50 mm
Questions
What parts does the Movement tracker use?
61 parts, built around the MCP2551-I/SN-HG, BNO08X and 150121YV74000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Movement tracker KiCad files?
From the evolutek/movement-tracker repository on GitHub, at the commit this page was made from: the board is V4/movement-tracker.kicad_pcb and its schematic V1/module-optique-grand/module-optique-grand.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Movement tracker design in my own project?
Its repository states no licence, so its author keeps all rights: ask evolutek before reusing the design.