

2r2 dac r3
A simple dip sw to DAC circuit.
- Size
- 34.3 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 17
- Pads
- 69
- Tracks, vias
- 115, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Feb 2024
- Updated
- 1 Mar 2024
Overview
2r2 dac r3 is an open-source printed circuit board by jerryok826, from the jerryok826/dip_sw_dac repository on GitHub, published under the MIT licence. It is a 2-layer board of 34.3 × 28 mm with 17 parts on 17 nets, routed with 115 tracks and 21 vias.
It is built around the 74AHC04D. Its parts include 4 capacitors, 3 resistors, 2 ICs, 1 connector and 1 switch. It belongs with the audio and music boards of this library.
Main components
1README
README.mddip_sw_dac

Project Description
Dip_sw_dac is an attempt to build a simple but precise digital potentiometer. It takes the VCC input of 5v or 3.3v and produces a selectable output in 64 steps. It can replace a three turn potentiometer in some adjustment use cases. The right most switch selects vcc/2. The left most switch is vcc/64. So for example if the two rightmost switches are on the board will output 3.75 Volts with a 5V VCC. Enabling the leftmost switch will increase the output by 0.078 volts or 1/64 of 5V.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 100pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H1, H2 |
| 1 | 10K_NET | Resistor_THT:R_Array_SIP7 | RN2 |
| 1 | 2R2_Network10_US | Resistor_THT:R_Array_SIP10 | RN1 |
| 1 | 74AHC04 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | DAC | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | DAC1 |
| 1 | DNL | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | GND1 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | GND1 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SW_DIP_x06 | Package_DIP:DIP-12_W7.62mm | SW1 |
Similar boards
- 4 layers141.9 × 131.1 mm

- 4 layers368.2 × 159.8 mm

- 4 layers130.5 × 171 mm

UniMixBase
jarekkt/UniController
This is a off-spin from my commercial controller for industrial ink printers. It is designed for pick & place machines controlled by OpenPnp
157 parts6 - 2 layers320 × 220 mm

D lev AIO Rev2
lens42/D-Lev-All-in-One-PCB
This integrates the excellent D-Lev digital theremin design at D-Lev.com into a single surface mount PCB
202 parts4MIT - 2 layers115.8 × 85.9 mm

Pypilot mfd
pypilot/pypilot_mfd
lcd display for various types of marine data including nmea0183, signalk and pypilot
103 parts4 - 2 layers41.3 × 38.1 mm

- 2 layers410.2 × 181.6 mm

- 2 layers209 × 175 mm

Excalibur64
Cptscorcher/Excallibur-64
A reimagining of the seminal Excalibur 64 Computer
126 partsGPL-3.0
Questions
How big is the 2r2 dac r3 PCB?
It measures 34.3 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 2r2 dac r3 use?
17 parts, built around the 74AHC04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 2r2 dac r3 KiCad files?
From the jerryok826/dip_sw_dac repository on GitHub, at the commit this page was made from: the board is Hardware/2r2_dac_r3.kicad_pcb and its schematic Hardware/2r2_dac_r3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 2r2 dac r3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).