

Control interface
KiCAD projects for RTL-SDR coherency projects
- Size
- 41.3 × 38.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 42
- Pads
- 220
- Tracks, vias
- 251, 214
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Mar 2021
- Updated
- 16 Mar 2022
Overview
Control interface is an open-source printed circuit board by zleffke, from the zleffke/kicad_rtl_cohere repository on GitHub, published under the MIT licence. It is a 2-layer board of 41.3 × 38.1 mm with 78 parts on 42 nets, routed with 251 tracks and 214 vias.
It is built around the ILD207T, 74AHC04D and SPX3819M5-L-3-3, with the SPX3819M5-L-5-0, IRLML6344TRPBF and BAS16W among its other parts. Its parts include 29 resistors, 12 capacitors, 7 transistors, 5 ICs and 4 switches. It belongs with the interfaces and adapters boards of this library.
Main components
6ILD207T
SO-8-150mil-55℃~+100℃ 1.2V 100% 2 200% 30mA 3us@2mA,100Ω 4.7us 400mV@2.5mA,10mA 4kV 6V 70V DC Phototransistor SO-8-150mil Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators74AHC04D
SOIC-14-40℃~+125℃ 1 1.5V~3.85V 1.9V、2.9V、4.4V 2V~5.5V 2uA 500mV~1.65V 6 7.5ns@5V,50pF 74AHC 8mA 8mA SOIC-14 Inverters ROHSNexperiaInvertersSPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSPX3819M5-L-5-0
SOT-23-5-40℃~+85℃@(Ta) 1 20V 350mV@(100mA) 500mA 5V 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsIRLML6344TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.1V 1.3W 29mΩ@4.5V 30V 46pF 5A 6.8nC 650pF SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETsBAS16W
SOT-323Switching DiodesLGE
README
README.mdKiCAD PCBs For RTL-SDR Coherent Receiver Projects
KiCAD projects for RTL-SDR coherency projects
Board Descriptions
| Board | Description |
|---|---|
| clk_dist_4chan | 4 channel clock distribution |
| clk_dist_8chan | 8 channel clock distribution |
| external_clock | External clock interface to RTL-SDR V3 header |
| rf_split | 4 channel rf splitter for calibration noise distribution, two versions |
Credit where its due!
This project is heavily inspired by the awesome work at coherent-receiver.com. I plan to make use of some common features, but also plan to do my own customized PCB layouts. My work will be nowhere near as professional as theirs. I highly recommend interested readers check out their page.
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R9, R10, R11, R12, R13, R26, R27, R28, R29 |
| 11 | 1k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R8, R14, R15, R16, R17, R20, R25 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C9, C10 |
| 5 | IRLML6344TRPBF | digikey-footprints:SOT-23-3 | Q1, Q2, Q3, Q4, Q5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2, TP5, TP6 |
| 2 | 0.01uF | Capacitor_SMD:C_0805_2012Metric | C11, C12 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C8 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | BAS16W | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D2 |
| 2 | ILD207T | digikey-footprints:SOIC-8_W3.9mm | U4, U5 |
| 2 | NOISE_SRC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | NOISE1, TP_GND1 |
| 1 | +12V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 2.5k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_2.0x2.0mm | TP7 |
| 1 | 3~DIS | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP8 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 5~DIS | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | 74AHC04 | digikey-footprints:SOIC-14_W3.9mm | U1 |
| 1 | 8k | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | CLOCK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | IRLML9301 | digikey-footprints:SOT-23-3 | Q7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | LED1 |
| 1 | MMBTA06LT1G | digikey-footprints:SOT-23-3 | Q6 |
| 1 | No_SW_1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | No_SW_2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 1 | No_SW_3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW3 |
| 1 | No_SW_4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW4 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SPX3819M5-L-5-0 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
More from zleffke/kicad_rtl_cohere
10- 2 layers50.8 × 28.6 mm

- 2 layers25.4 × 31.8 mm

- 2 layers25.4 × 31.8 mm

- 2 layers28.6 × 31.8 mm

Active rf split 4way
zleffke/kicad_rtl_cohere
KiCAD projects for RTL-SDR coherency projects
35 parts3MIT - 2 layers28.6 × 31.8 mm

Active rf split 4way
zleffke/kicad_rtl_cohere
KiCAD projects for RTL-SDR coherency projects
34 parts3MIT - 2 layers31.8 × 21.6 mm

- 2 layers31.8 × 21.6 mm

- 2 layers31.8 × 21.6 mm

- 2 layers25.4 × 6.4 mm

- 2 layers9.5 × 8.9 mm

Similar boards
- 2 layers30 × 60 mm

SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 6 layers44 × 68 mm

- 2 layers153 × 61.5 mm

- 2 layers156 × 66 mm

Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers230 × 84.9 mm

- 4 layers110 × 90 mm

PLC V1
paulmartinezcuenta/UltiCore-V1-PLC
Custom industrial-grade PLC and logic controller engineered around the ESP32 platform.
202 parts1MIT - 2 layers138.5 × 84 mm

PowerCommander
reaktor23/pwrcmder
Reaktor23 Power Commander https://reaktor23.org/projects/pwrcmdr2/
127 partsMIT - 2 layers

PLC V1
JosueHerrera05/Josue_Herrera_Electiva_2026_C2
Repositorio Electíva Diseño Mecatrónico 2026-C2
59 partsMIT
Questions
How big is the Control interface PCB?
It measures 41.3 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control interface use?
78 parts, built around the ILD207T, 74AHC04D, SPX3819M5-L-3-3 and SPX3819M5-L-5-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control interface KiCad files?
From the zleffke/kicad_rtl_cohere repository on GitHub, at the commit this page was made from: the board is control_interface/v1_rev-/control_interface.kicad_pcb and its schematic clock_source/v1_rev-A/clock_source_4chan.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control interface design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).