Skip to the content
2 layers209 × 175 mmExcalibur64, the printed circuit board in 3D

A reimagining of the seminal Excalibur 64 Computer

Size
209 × 175 mm
Copper layers
2
Thickness
1.58 mm
Parts
126
Nets
225
Pads
786
Tracks, vias
2,827, 146
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 May 2025
Updated
3 Feb 2026

Overview

Excalibur64 is an open-source printed circuit board by Cptscorcher, from the Cptscorcher/Excallibur-64 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 209 × 175 mm with 126 parts on 225 nets, routed with 2,827 tracks and 146 vias.

It is built around the 74HC367D, 74HCT244D and MAX232N, with the LM348N, 74AHC04D and 74HC138 among its other parts. Its parts include 32 capacitors, 25 resistors, 21 ICs, 19 connectors and 17 diodes.

Main components

12

README

README.md

Excallibur-64

A reimagining of the seminal Excalibur 64 Computer This is version 4 - now have the UART working. Was a bit of pig becasue I used an OKI UART which has some different status register bits + some reset timing requirements. Keyboard works, using an orginal keyboard. Still need to test on this board:

  1. Audio, code done but need to test hardware.
  2. Tape, as above code done but needs testing.

Changed compiler from sjasmplus to z88dk, my asm skills aren't good enough to make something decent. There is no video yet, that is a separate beast.

Goal for this project

Design build a new version of the Excalibur 64. First major goal is to get all but the video going. Final version will have video as per original design.

Design requirements

  1. Needs to have the same look and feel of a real Excalibur 64. So the circuit for the sound and, parallel and keyboard is the same but with CMOS where possible.
  2. Same goes for the video but need to think about a work around for the 6331-1 PROM.
  3. There are some differences for practically and cost. For example using a single SRAM and single Flash ROM instead of two ROMs. Burning ROMs is a pain maybe when I do a 'pitch perfect' PCB I'll use DRAM and PROMS. The power supply is also different. At $25 I'm not using a LM323 for a +5 reg and since we are using a RS232 line driver IC there is no need for -12v. The reset circuit is different, that was simply because I don't understand how the original reset circuit worked. Its great to be authentic but a different power circuit isn't going to change the experience.

Future plans

  1. Build a Disk Drive controller based on the WD2793 as per the original. (UPDATE [30/6/25]: Started work on this with the help of the orginal designer)
  2. Build a HI-RES board.
  3. Build some of the other boards featured in the Excalibur 64 users group newsletters.
  4. All the parts used on the original are still available so would be great to build one as the founders intended. All hail the founders!!

Credits

All the original schematics + more is available from https://www.microbee-mspp.org/repository/ . Info from here was what this design is based on.

Parts

126
QtyValueFootprintReferences
161uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115, C116
101N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D21, D22
61uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC7, C121, C123, C124, C125, C126
54µ7 25VCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2, C23, C27, C38, C41
410KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR16, R17, R112, R113
42K2Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR18, R23, R25, R111
490Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR108, R109, R116, R117
318KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR19, R21, R114
2100nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC36, C42
210KResistor_THT:R_Array_SIP5RN1, RN101
2560Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R10
2BC548Package_TO_SOT_THT:TO-92_HandSolderQ1, Q102
2GNDTestPoint:TestPoint_Plated_Hole_D2.0mmTP2, TP103
2GreenLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderLED102, LED104
2REDLED_THT:LED_D5.0mmD9, D14
2RedLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderLED101, LED103
110Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR38
110kResistor_THT:R_Array_SIP9RN2
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC26
118Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR115
118RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR20
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR22
1220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
12200µ 25VCapacitor_THT:CP_Radial_D22.0mm_P10.00mm_3pin_SnapInC37
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR101
1500mAFuse:Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_HorizontalF1
156nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC25
15vConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ4
168KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR24
174AHC04Package_DIP:DIP-14_W7.62mm_Socket_LongPadsIC29
174HC138Package_DIP:DIP-16_W7.62mm_LongPadsIC25
174HC138Package_DIP:DIP-16_W7.62mm_Socket_LongPadsIC32
174HC139Package_DIP:DIP-16_W7.62mm_Socket_LongPadsIC18
174HC161Package_DIP:DIP-16_W7.62mm_Socket_LongPadsIC56
174HC273Package_DIP:DIP-20_W7.62mm_SocketIC31
174HC32Package_DIP:DIP-14_W7.62mm_LongPadsIC27
174HC367Package_DIP:DIP-16_W7.62mm_Socket_LongPadsIC49
174HC86Package_DIP:DIP-14_W7.62mm_Socket_LongPadsU104
174HCT244Package_DIP:DIP-20_W7.62mm_LongPadsIC1
174LS157Package_DIP:DIP-16_W7.62mm_Socket_LongPadsIC26
17805Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownIC38
1820Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR39
18251Package_DIP:DIP-28_W15.24mm_LongPadsIC22
18253Package_DIP:DIP-24_W15.24mmIC15
182C55APackage_DIP:DIP-40_W15.24mmIC35
1BZX79-B2V4Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalDZ101
1CASSETTEConnector_DIN:DIN_5J108
1CH 16-24Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_VerticalJ6
1CS Test PointsConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ101
1CS4_AUXConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1CXO_DIP8Oscillator:Oscillator_SeikoEpson_SG-8002DCY1
1Conn_01x06Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ9
1Conn_02x08_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ5
1DS1813Package_TO_SOT_THT:TO-92IC30
1DebugConnector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_HorizontalJ2
1DecoderConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ7
1GREENLED_THT:LED_D5.0mmD10
1HM62256ALSPPackage_DIP:DIP-28_W15.24mmIC7
1KeyboardConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ111
1LM348NPackage_DIP:DIP-14_W7.62mm_LongPadsIC42
1MAX232Package_DIP:DIP-16_W7.62mm_LongPadsIC102
1PARALLEL OUTPUT PORTConnector_IDC:IDC-Header_2x17_P2.54mm_Latch_HorizontalJ110
1PowerConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1PowerMFS201N-16-Z_NDC:MFS201N-16-Z_NDCSW1
1RTS - DSRConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ109
1ResetButton_Switch_THT:Tact_switch_angledSW101
1RxConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ103
1SPEAKERConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ104
1SST39SF010Socket:DIP_Socket-32_W11.9_W12.7_W15.24_W17.78_W18.5_3M_232-1285-00-0602JIC17
1SerialConnector_Dsub:DSUB-9_Pins_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset4.94mmJ112
1TTL SerialConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ105
1TxConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ102
1UpperROMConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ106
1Z80 CPUPackage_DIP:DIP-40_W15.24mm_LongPadsIC16

More from Cptscorcher/Excallibur-64

3
  • 2 layersVideoBoard, the printed circuit board in 3D

    VideoBoard

    Cptscorcher/Excallibur-64

    A reimagining of the seminal Excalibur 64 Computer

    126 partsGPL-3.0
  • 2 layers143 × 175 mmVideoBoard, the printed circuit board in 3D

    VideoBoard

    Cptscorcher/Excallibur-64

    A reimagining of the seminal Excalibur 64 Computer

    55 partsGPL-3.0
  • 2 layers121 × 107.3 mmFDD Excalibur Interface, the printed circuit board in 3D

    FDD Excalibur Interface

    Cptscorcher/Excallibur-64

    A reimagining of the seminal Excalibur 64 Computer

    47 partsGPL-3.0

Similar boards

  • 4 layers100 × 100 mmEth, the printed circuit board in 3D

    Eth

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    101 parts145
  • 2 layers177.8 × 130.8 mmDurango, the printed circuit board in 3D

    Durango

    zuiko21/minimOS

    Scalable OS for 6502/65816

    159 parts23MIT
  • 4 layers304.5 × 217.2 mmLatest Full Backplane, the printed circuit board in 3D

    Latest Full Backplane

    Trilobyte-CPU/8-bit-computer

    A DIY 8-bit computer built mostly with discrete logic chips

    478 parts2
  • 2 layers210 × 170 mmTB04addr8bit ctrl, the printed circuit board in 3D

    TB04addr8bit ctrl

    Myuu1967/TB-04

    4bitCPU(TB-04)に関するリポジトリです

    102 parts
  • 2 layers178 × 711 mmMSAP-2 rev.A SMD, the printed circuit board in 3D

    MSAP-2 rev.A SMD

    mehrantsi/MSAP-2

    An 8-bit computer. Successor to MSAP-1

    658 parts13MIT
  • 2 layers101.6 × 55.9 mmOutput register, the printed circuit board in 3D

    Output register

    ifilot/sap-smd

    Modular 8-bit computer built with TTL logic units to create a "Simple as Possible" system

    30 parts2CERN-OHL-S-2.0
  • 2 layers167.6 × 134.6 mmMotherboard, the printed circuit board in 3D

    Motherboard

    rjhelms/compe6502

    Homebrew 6502 system

    110 parts2

Questions

How big is the Excalibur64 PCB?

It measures 209 × 175 mm and has 2 copper layers, 1.58 mm thick.

What parts does the Excalibur64 use?

126 parts, built around the 74HC367D, 74HCT244D, MAX232N and LM348N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Excalibur64 KiCad files?

From the Cptscorcher/Excallibur-64 repository on GitHub, at the commit this page was made from: the board is Kicad/Excalibur64.kicad_pcb and its schematic Kicad/1_Reset_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Excalibur64 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).