

TI-99/4A to Raspberry PI messaging through console sideport
- Size
- 78.7 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 112
- Pads
- 268
- Tracks, vias
- 944, 66
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jan 2017
- Updated
- 30 Aug 2025
Overview
Tipi is an open-source printed circuit board by jedimatt42, from the jedimatt42/tipi repository on GitHub. It is a 2-layer board of 78.7 × 56.5 mm with 32 parts on 112 nets, routed with 944 tracks and 66 vias.
It is built around the 74HCT245, 27C256-17/J and LM1117-3.3. Its parts include 11 capacitors, 6 resistors, 4 ICs, 1 diode and 1 transistor. It belongs with the FPGA and CPLD boards of this library.
Main components
374HCT245
DIP-20-40℃~+85℃ 28ns@4.5V 4.5V~5.5V 6mA 6mA 74HCT 8 8uA Bidirectional TTL-compatible CMOS Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core Elec74 Series27C256-17/J
-0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdTIPI
(Pronounced tip-ee)
Turn a Raspberry PI and some glue hardware into a TI Disk Drive and Network interface.
Keep it open for further device extension.
Branching
(For end users starting from an SD card image, you are already on the correct branch)
- End users must be on one of the
_releasebranches for physical TIPI mainbranch is full of stuff that doesn't work, won't upgrade correctly, and certainly won't downgrademainbranch is expert mode only
Branches:
main - current development for latest Raspberry PI OS
bookworm_release - Current release branch based on Raspberry PI OS 12 - bookworm
bullseye_release - (legacy) end of life, as new bookworm_release branch is available
buster_dev - (legacy) for patching upstream of buster_release
buster_release - (legacy) for Raspberry PI 2W - 4B+ or Qemu use.Documentation
Please refer to the wiki
License
The hardware design files and TI-99 DSR ROM code are in the hardware folder and free for use under the UNLICENSE.txt
The remaining software contained in this repository are licensed under the terms of GPLv3
These files are part of TIPI.
TIPI is free hardware design and software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
TIPI is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with TIPI SD Card Image. If not, see GNU Licenses.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uf | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 5 | TEST_1P | Wire_Pads:SolderWirePad_single_0-8mmDrill | T1, T2, T3, T4, T5 |
| 3 | 10k | Resistors_SMD:R_0805_HandSoldering | R4, R5, R6 |
| 2 | 1k | Resistors_SMD:R_0805_HandSoldering | R1, R3 |
| 1 | 10uf | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 22uf | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 27C256 | Housings_DIP:DIP-28_W15.24mm_Socket | U2 |
| 1 | 330 | Resistors_SMD:R_0805_HandSoldering | R2 |
| 1 | 74HCT245 | SMD_Packages:SSOP-20 | U3 |
| 1 | AVR-JTAG-10 | Connect:IDC_Header_Straight_10pins | JTAG1 |
| 1 | CONN_02X04 | Pin_Headers:Pin_Header_Straight_2x04_Pitch2.54mm | CRUBASE1 |
| 1 | LED_ALT | LEDs:LED_D3.0mm | D1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U4 |
| 1 | Q_NPN_BCE | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | RPI_CONN_02X05 | Connect:IDC_Header_Straight_10pins | RPi1 |
| 1 | TI32kSideport | Pin_Headers:Pin_Header_Straight_2x22_Pitch2.54mm | J1 |
| 1 | XC95144XL-TQ100 | Housings_QFP:TQFP-100_14x14mm_Pitch0.5mm | U1 |
More from jedimatt42/tipi
2- 2 layers237.7 × 146.1 mm

- 2 layers115.7 × 56 mm

Similar boards
- 2 layers100 × 56.5 mm

Tipi
lucedoriente/TI99-4A-internal-TIPI
This TIPI board is for use with danwerner21 (https://github.com/danwerner21/TI99_22.git) TI99-22 project
32 parts6 - 4 layers318.4 × 124.5 mm

- 2 layers218 × 125 mm

EVA1 v2
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
160 parts - 2 layers129.2 × 50 mm

- 4 layers184.9 × 243.8 mm

Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 2 layers104.1 × 87.6 mm

- 2 layers100 × 77.5 mm

- 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56
Questions
How big is the Tipi PCB?
It measures 78.7 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tipi use?
32 parts, built around the 74HCT245, 27C256-17/J and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tipi KiCad files?
From the jedimatt42/tipi repository on GitHub, at the commit this page was made from: the board is hardware/tipi-sideport/kicad/tipi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tipi design in my own project?
Its repository states no licence, so its author keeps all rights: ask jedimatt42 before reusing the design.