

This TIPI board is for use with danwerner21 (https://github.com/danwerner21/TI99_22.git) TI99-22 project
- Size
- 100 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 112
- Pads
- 268
- Tracks, vias
- 1,819, 169
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Apr 2024
- Updated
- 18 Oct 2026
Overview
Tipi is an open-source printed circuit board by lucedoriente, from the lucedoriente/TI99-4A-internal-TIPI repository on GitHub. It is a 2-layer board of 100 × 56.5 mm with 32 parts on 112 nets, routed with 1,819 tracks and 169 vias.
It is built around the 74HCT245, 27C256-17/J and LM1117-3.3. Its parts include 11 capacitors, 6 resistors, 4 ICs, 1 diode and 1 transistor. It belongs with the FPGA and CPLD boards of this library.
Main components
374HCT245
DIP-20-40℃~+85℃ 28ns@4.5V 4.5V~5.5V 6mA 6mA 74HCT 8 8uA Bidirectional TTL-compatible CMOS Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core Elec74 Series27C256-17/J
-0℃~+70℃ 256Kbit 4.5V~5.5V EPROM Parallel Port (Parallel) - Non-Volatile Memory (ROM)Microchip TechnologyNon-Volatile Memory (ROM)LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdThis projct born to integrate the ElectricLab & Jedimatt42 TIPI board in the new TI99/4A version by Dan Werner. I like so much this project and adding TIPI features without external box or usin PEB seems to me a great idea. Maybe it's not but I like it.
License The original project was licensed under the Creative Commons - Attribution - ShareAlike 3.0 License
Attribution This board was derrived from works by, uses design elements from, or contains sofware writen by the following:
Matthew Splett - jedimatt42 (https://github.com/jedimatt42/tipi.git)
Inspired by the Dan Werner beautiful TI99-22 project:
Dan Werner (https://github.com/danwerner21/TI99_22.git)
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 5 | TEST_1P | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | T1, T2, T3, T4, T5 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 27C256 | Package_DIP:DIP-28_W15.24mm_Socket | U2 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 74HCT245 | Package_SO:SSOP-20_3.9x8.7mm_P0.635mm | U3 |
| 1 | AVR-JTAG-10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | JTAG1 |
| 1 | CONN_02X04 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | CRUBASE1 |
| 1 | LED_ALT | LED_THT:LED_D3.0mm | D1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U4 |
| 1 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RPI_CONN_02X05 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | RPi1 |
| 1 | TI32kSideport | Connector_PinSocket_2.54mm:PinSocket_2x22_P2.54mm_Vertical | J1 |
| 1 | XC95144XL-TQ100 | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
Similar boards
- 2 layers237.7 × 146.1 mm

- 4 layers318.4 × 124.5 mm

- 2 layers218 × 125 mm

EVA1 v2
roberto314/EVA-1_Reproduction
Recreation of the very rare K-K Systems EVA-1 Display Adapter for the Epson HX-20 Computer
160 parts - 2 layers129.2 × 50 mm

- 4 layers184.9 × 243.8 mm

Project NuXT
monotech/NuXT
MicroATX Turbo XT Motherboard, with VGA, Floppy, CF, Serial
223 parts121GPL-3.0 - 2 layers104.1 × 87.6 mm

- 2 layers100 × 77.5 mm

- 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56
Questions
How big is the Tipi PCB?
It measures 100 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tipi use?
32 parts, built around the 74HCT245, 27C256-17/J and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tipi KiCad files?
From the lucedoriente/TI99-4A-internal-TIPI repository on GitHub, at the commit this page was made from: the board is tipi.kicad_pcb and its schematic tipi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tipi design in my own project?
Its repository states no licence, so its author keeps all rights: ask lucedoriente before reusing the design.