

Spekky Matrix
Spectrum analyser displayed on a LED matrix board connected to a STM32 device
- Size
- 153 × 95.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 390
- Nets
- 110
- Pads
- 939
- Tracks, vias
- 2,666, 731
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Apr 2024
- Updated
- 24 Oct 2026
Overview
Spekky Matrix is an open-source printed circuit board by jc-SpaceXp, from the jc-SpaceXp/Spekky-Matrix repository on GitHub, published under the MIT licence. It is a 2-layer board of 153 × 95.8 mm with 390 parts on 110 nets, routed with 2,666 tracks and 731 vias.
It is built around the STM32G431K8T6, STP16CP05XT and LMS1585AIS-3.3, with the LTST-C190KRKT, RT0603DRE071KL and RT0603FRE0710RL among its other parts. Its parts include 260 diodes, 31 resistors, 15 capacitors, 8 transistors and 5 ICs. It belongs with the lEDs and displays and sensors and measurement boards and the STM32 boards of this library.
Main components
12STM32G431K8T6
LQFP-32(7x7)1.71V~3.6V 12bit 12bit 170MHz 26 64KB ARM Cortex-M Series FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)STP16CP05XT
TSSOP-24-EP-40℃~+125℃ 100mA 16 20V 30MHz 3V~5.5V 5% Built-in TSSOP-24-EP LED Drivers ROHSSTMicroelectronicsLED DriversLMS1585AIS-3.3
TO-263-3-40℃~+125℃ 0.003%Vout 1 1.2V@(5A) 2mA 3.3V 5A 72dB@(120Hz) 7V Fixed Over Current Protection、Over Temperature Protection Positive DDPAK-3(TO-263-3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLTST-C190KRKT
0603-30℃~+85℃ 130° 20mA 2V 62.5mW 631nm 639nm 99mcd Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteRT0603DRE071KL
0603-55℃~+155℃ 100mW 1kΩ 75V Thin Film Resistor ±0.5% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0603FRE0710RL
0603Chip Resistor - Surface MountYAGEORT0603FRE075K1L
0603-55℃~+155℃ 100mW 5.1kΩ 75V Thin Film Resistor ±1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountDMP3125L-7
SOT-23-55℃~+150℃ 1 P-Channel 2.5A 254pF 3.1nC@4.5V 30V 650mW 7pF 95mΩ@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsEDH106M016A9BAA
SMD,D4xL5.4mm-40℃~+105℃ 10uF 16V 2000hrs@105℃ 28mA@120Hz Polarized ±20% SMD,D4xL5.4mm Aluminum Electrolytic Capacitors - SMD ROHSKEMETAluminum Electrolytic Capacitors - SMDPESD5V0X1UAB
SC-79(SOD-523)-55℃~+150℃ 1 1.55pF 1nA 2A@8/20us 5.8V 5V 9V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SC-79(SOD-523) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)RP73PF1J100KBTDF
0603-55℃~+155℃ 100V 100kΩ 167mW Thin Film Resistor ±0.1% ±25ppm/℃ 0603 Chip Resistor - Surface Mount ROHSTE ConnectivityChip Resistor - Surface MountRT0603FRE0710KL
0603-55℃~+155℃ 100mW 10kΩ 75V Thin Film Resistor ±1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface Mount
Parts
390| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | LED Matrix (RED) | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115, D116 +240 |
| 37 | TestPoint_2Pole | Diode_SMD:D_0805_2012Metric | TP2, TP11, TP16, TP24, TP25, TP26, TP27, TP28, TP29, TP30, TP31, TP32, TP33, TP34, TP35, TP36 +21 |
| 23 | TestPoint_2Pole | Diode_SMD:D_MicroMELF | TP1, TP3, TP10, TP12, TP13, TP14, TP15, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP56, TP57 +7 |
| 13 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R4, R13, R14, R15, R16, R17, R18, R19, R20, R29, R30, R31 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C6, C7, C8, C11, C12, C13, C14, C15 |
| 8 | 10R | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9, R10, R11, R12 |
| 8 | 5K1 | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R25, R26, R27, R28 |
| 8 | DMP3125L-7 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | STP16CP05XT | Package_SO:HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm | U3, U4, U5 |
| 2 | 10u | Capacitor_SMD:CP_Elec_4x4.5 | C3, C4 |
| 2 | PESD5V0X1UAB | Diode_SMD:D_SOD-523 | D1, D3 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 2K2 | Potentiometer_THT:Potentiometer_Bourns_3386F_Vertical | RV1 |
| 1 | 300R @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 3V3 LED (RED) | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | GPIO Debug LED (GREEN) | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | LMS1585AIS-3.3 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U1 |
| 1 | MSM261S4030H0R I2S Mic | spekky_matrix:LGA-8_2x4_3.0x4.0mm_P1.0mm_Hand_Solder | MK1 |
| 1 | STM32G431K8Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | Short RV1 (Open) | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118194-0001LF_Horizontal | J1 |
Similar boards
- 2 layers50 × 100 mm

- 2 layers102 × 103 mm

- 2 layers116.2 × 95.4 mm

- 4 layers85 × 57.5 mm

- 2 layers109.8 × 109.9 mm

LightBoxNano
TimGremalm/LightBoxNano
a generic PCB for controlling LED's both LED strip and WS2812
76 parts6GPL-3.0 - 2 layers100 × 51.3 mm

Desk controller
FLRHW/Desk_controller
Standing desk controller - Touch display as HMI and servo motor interface
105 parts - 2 layers54 × 75 mm

- 4 layers65 × 45 mm

Questions
How big is the Spekky Matrix PCB?
It measures 153 × 95.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spekky Matrix use?
390 parts, built around the STM32G431K8T6, STP16CP05XT, LMS1585AIS-3.3 and LTST-C190KRKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spekky Matrix KiCad files?
From the jc-SpaceXp/Spekky-Matrix repository on GitHub, at the commit this page was made from: the board is pcb/kicad/spekky_matrix.kicad_pcb and its schematic pcb/kicad/I2S_MIC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spekky Matrix design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).