

Macropad
STM32F103C8T6 based macropad
- Size
- 116.2 × 95.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 99
- Nets
- 110
- Pads
- 495
- Tracks, vias
- 737, 263
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Feb 2026
- Updated
- 10 Jul 2026
Overview
Macropad is an open-source printed circuit board by sarthakmmishra, from the sarthakmmishra/macropad repository on GitHub. It is a 2-layer board of 116.2 × 95.4 mm with 99 parts on 110 nets, routed with 737 tracks and 263 vias.
It is built around the STM32F103C8T6, RT8010-33GQW and DW01A, with the TP4056, AC0603JRX7R9BB104 and GCM0335C1H180FA16D among its other parts. Its parts include 31 capacitors, 24 resistors, 12 switches, 9 ICs and 9 connectors. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
12STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)RT8010-33GQW
WDFN-6(2x2)-40℃~+85℃@(TA) 1 1.5MHz 1A 2.5V~5.5V 3.3V 50uA Buck Buck Built-in Fixed Yes WDFN-6(2x2) DC-DC Converters ROHSRichtek TechDC-DC ConvertersDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementAC0603JRX7R9BB104
0603100nF 50V X7R ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTGCM0335C1H180FA16D
020118pF 50V C0G ±1% 0201 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMTAC0603FR-071KL
0603-55℃~+155℃ 100mW 1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0603FRE075K1L
0603-55℃~+155℃ 100mW 5.1kΩ 75V Thin Film Resistor ±1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0603FRE071K5L
0603-55℃~+155℃ 1.5kΩ 100mW 75V Thin Film Resistor ±1% ±50ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountCRCW06031M00FKEAC
0603-55℃~+155℃ 100mW 1MΩ Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface MountUMK212B7105KGHT
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTTMK107BBJ225KAHT
06032.2uF 25V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdEE2504: Hybrid Macropad (Wired + Dongle)
Team
| Name | Roll Number |
|---|---|
| Sarthak Kumar Mishra | EE24BTECH11221 |
| Naman Singh | EE24BTECH11216 |
| Dhawal Saini | EE24BTECH11015 |
| Sidharth V | EE24BTECH11224 |
| Vantaku Sai Yashwant | EE24BTECH11225 |
| Sriram Nulu | EE24BTECH11217 |
Details
- 2 Layer PCB for Macropad+Dongle Pair
- STM32F103C8T6 Based
- Programmed with
libopencm3 - ssd1306 display integrated
- CAD Model designed to be 3D Printed for keycaps, encoder caps and casing.
microuibased key-map programming interface
Instruction
- Make the libraries (
libopencm3) - Make and flash bootloader using
make flash - Make and flash macropad firmware using
make flashor the dfu script - Generate keymaps and flash using
mapping_gen
Current Status
- PCB Ordered
Wired
- Bootloader Firmware
- USB HID Firmware
- DFU Firmware
- Encoder Firmware
- Display Firmware
- All module integration
- Multi key mapping
- Multi key sequential mapping
Wireless
- Dongle testing
- nRF24L01 Firmware
- Battery Charging check
- Soldering SMD Mosfet + nRF modules
- Replacing PROG resistor for TP4056 module
- Complete Integration
Other
- Mapping generation and flashing with DFU
- GUI
- Size Optimization for keymaps
Images
Links
Parts
99| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6, C8, C9, C11, C12, C14, C19, C20, C22, C24, C25 |
| 12 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R3, R5, R11, R12, R13, R14, R17, R18, R19, R20, R23 |
| 9 | SW_Push | keyswitches:Kailh_socket_MX | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 6 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C7, C23, C26, C31 |
| 4 | 18p | Capacitor_SMD:C_0201_0603Metric | C10, C15, C17, C18 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R7, R9 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R15, R16, R24 |
| 2 | 1.5k | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C16, C29 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C13, C28 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C21, C30 |
| 2 | Conn_01x02 | Connector_Hirose:Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical | J3, J10 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D3 |
| 2 | LP2992IM5-3.3/NOPB | LP2992:DBV0005A_N | U1, U9 |
| 2 | NRF24L01_Breakout | nrf24l01:nRF24L01_Breakout | U3, U5 |
| 2 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm | SW12, SW13 |
| 2 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2, U4 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 100 | Resistor_SMD:R_0201_0603Metric | R10 |
| 1 | 2.2uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 8Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 8Mhz C_L=12pF | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x02 | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J8 |
| 1 | Conn_01x03_Socket | Connector_Hirose:Hirose_DF13-03P-1.25DSA_1x03_P1.25mm_Vertical | J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D2 |
| 1 | FS8205A | FS8205A:SOP65P640X120-8N | Q2 |
| 1 | Q_PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | RT8010 | RT8010:WDFN-6L | U10 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_SPDT | SS12F23L5:SS12F23L5 spdt | SW10 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U6 |
| 1 | USB_A | usbA:U-G-O4DD-W-1 | J9 |
| 1 | USB_C_Receptacle_USB2.0_16P | usbc:TYPE-C-SMD_U263-163N-4GS1735 | J2 |
| 1 | display(4x1) | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
The 93 most common of 99 parts.
Similar boards
- 4 layers90.4 × 56 mm

- 2 layers153 × 95.8 mm

Spekky Matrix
jc-SpaceXp/Spekky-Matrix
Spectrum analyser displayed on a LED matrix board connected to a STM32 device
390 parts1MIT - 2 layers100 × 100.1 mm

Diploma
t3ry4git/stm32Co2
A simple CO2 and environmental monitor based on the STM32F103C8 microcontroller. The firmware reads temperature and humidity from a DHT22 sensor, measures CO2 concentration using an MHZ19B module and displays values on…
62 parts - 2 layers55 × 80 mm

- 2 layers100 × 83.3 mm

- 2 layers95 × 95 mm

- 4 layers74 × 114 mm

- 2 layers192.4 × 50 mm

Questions
How big is the Macropad PCB?
It measures 116.2 × 95.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macropad use?
99 parts, built around the STM32F103C8T6, RT8010-33GQW, DW01A and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad KiCad files?
From the sarthakmmishra/macropad repository on GitHub, at the commit this page was made from: the board is hardware/macropad/macropad.kicad_pcb and its schematic hardware/macropad/dongle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask sarthakmmishra before reusing the design.