4 layers85 × 55 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
29 parts2
4 layers100 × 60 mm
Device
jayis1/hacker-devices2Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
- Size
- 100 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 31
- Pads
- 64
- Tracks, vias
- 9, 5
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20231007)
- Created
- 12 Jun 2026
- Updated
- 6 Nov 2026
Overview
Device is an open-source printed circuit board by jayis1, from the jayis1/hacker-devices repository on GitHub. It is a 4-layer board of 100 × 60 mm with 17 parts on 31 nets, routed with 9 tracks and 5 vias.
It is built around the STM32H743VIT6, MP1584EN and OPA380, with the S1223 among its other parts. Its parts include 5 ICs, 3 capacitors, 3 diodes, 2 resistors and 2 connectors. It belongs with the STM32 boards of this library.
Main components
4
STM32H743VIT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 12bit 16bit 1MB 2MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC ConvertersOPA380
UncategorisedTexas InstrumentsS1223
Throughhole插件 New Arrivals ROHSHAMAMATSUUncategorised
README
README.mdHacker Devices — Open Hardware for Security Research
A collection of fully open-source hardware designs for legitimate security research and pentesting. Every device is complete end-to-end: engineering docs, KiCad schematics & PCB layouts, production C/Python firmware, and React Native companion apps. Build it, flash it, run the app, start researching.
What's Inside Every Device
No half-finished reference designs. Each device folder contains the full stack:
| Category | Files | Description |
|---|---|---|
| Engineering Docs | phase1_conceptual_architecture.md → phase4_software_stack.md | 4-phase design process: requirements, BOM & netlists, PCB layout rules, software stack |
| KiCad Schematics | kicad/*.kicad_pro, *.kicad_sch, *.kicad_pcb | Full schematic with real component symbols, net labels, power flags, and board outline with placed footprints |
| C/Python Firmware | firmware/main.c, registers.h, board.h, drivers/, Makefile | Production-quality MCU firmware — init code, drivers with DMA, USB descriptors, wire protocol |
| React Native App | app/App.js, screens/, components/, utils/protocol.js, package.json | Companion mobile app for device control, configuration, real-time status, and data capture |
Design Methodology
Every device follows a rigorous 4-phase process:
| Phase | Document | Contents |
|---|---|---|
| Phase 1 | phase1_conceptual_architecture.md | Purpose, performance targets, constraints, block diagram, bus topology, power domains |
| Phase 2 | phase2_component_selection_schematics.md | BOM with real part numbers, pinouts/MUX tables, decoupling networks, netlists, impedance matching |
| Phase 3 | phase3_pcb_blueprints_layout.md | PCB stackup, routing rules, length matching, via strategy, thermal management, DFM notes |
| Phase 4 | phase4_software_stack.md | MMIO/register defs, clock & GPIO init (production C), critical device driver, device tree, bootloader |
Devices
| # | Device | Status | Description |
|---|---|---|---|
| 1 | wifi-pentest-dongle/ | ✅ Complete | 802.11ax monitor/inject, deauth, PMKID capture |
| 2 | rf-transceiver-tool/ | ✅ Complete | Sub-GHz + 2.4GHz multi-protocol (CC1101 + nRF24) |
| 3 | badusb-injector | ⏳ Queued | HID emulation payload injector, multi-profile |
| 4 | nfc-rfid-cloner | ⏳ Queued | 13.56MHz + 125kHz, Mifare/EM4100 |
| 5 | network-tap-mitm | ⏳ Queued | 2× GbE transparent bridge, packet capture |
| 6 | can-bus-analyzer | ⏳ Queued | OBD-II + CAN-FD, automotive pentest |
| 7 | sdr-keyfob-replay | ⏳ Queued | 433/315MHz keyfob capture & replay |
| 8 | ble-sniffer-spoofer | ⏳ Queued | nRF52, advertisement inject, GATT fuzz |
| 9 | imsi-catcher-detector | ⏳ Queued | LTE/4G SDR analysis |
| 10 | biometric-bypass-toolkit | ⏳ Queued | Fingerprint emulation, RFID clone for access control |
Constraints
- BOM target: Under $100 per device
- Form factor: Portable, USB-powered or battery-operated
- All designs use real, purchasable components with exact part numbers
- KiCad schematics are valid KiCad 7+ format — open them directly
- Firmware is production-quality C — not stubs or pseudocode
- React Native apps have working UI with proper state management and wire protocol matching the firmware
License
| Component | License |
|---|---|
| Hardware design (KiCad) | CERN-OHL-S v2 |
| C firmware & drivers | GPL-2.0 |
| Python tools & scripts | MIT |
| React Native companion apps | MIT |
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 4u7H | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | LED_GREEN | Package_LED:LED_0603_1608Metric | D3 |
| 1 | LED_RED | Package_LED:LED_0603_1608Metric | D4 |
| 1 | LT3045IDE | Package_DFN_QFN:DFN-12-1EP_3x3mm_P0.45mm | U5 |
| 1 | MP1584EN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | OPA380 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | S1223 | Package_TO_SOT_THT:TO-5-2_Window | D2 |
| 1 | STM32H743VIT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SW_SPST_KEYED | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | iC-HK | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm | U2 |
Questions
How big is the Device PCB?
It measures 100 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Device use?
17 parts, built around the STM32H743VIT6, MP1584EN, OPA380 and S1223. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Device KiCad files?
From the jayis1/hacker-devices repository on GitHub, at the commit this page was made from: the board is lumen-tap/kicad/device.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Device design in my own project?
Its repository states no licence, so its author keeps all rights: ask jayis1 before reusing the design.
More from jayis1/hacker-devices
12- 70 × 40 mm
Silent symphony
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
27 parts2 - 4 layers65 × 30 mm
Chronos phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
26 parts2 - 4 layers70 × 45 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
25 parts2 - 4 layers85 × 24 mm
Trace reaper
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
24 parts2 - 4 layers86 × 55 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
22 parts2 - 4 layers120 × 22 mm
Acoustic phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 4 layers80 × 40 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 4 layers85 × 54 mm
Rf transceiver tool
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
20 parts2 - 2 layers118 × 68 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
19 parts2 - 4 layers50 × 24 mm
Ghostbus
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
18 parts2 - 4 layers22 × 18 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
18 parts2
Similar boards
- 2 layers
- 2 layers80 × 294 mm
Cubesat panel
SFUSatClub/xy-Panel
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
68 parts - 2 layers80 × 80 mm
Z panel
SFUSatClub/z-panel
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
43 parts - 2 layers18.5 × 4.3 mm
PHOTOBOARD
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
11 parts11 - 4 layers81.6 × 88.8 mm
Cheetah MX4-Mini
KaiPereira/Cheetah-MX4-Mini
A powerful yet compact 3D printer motherboard that supports TMC stepsticks, fans, heaters, screens and thermistors
171 parts179 - 4 layers200 × 100 mm
Heteromycin
hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
373 parts40 - 2 layers100 × 84 mm
MIxer SPDIF V1.0
DADDesign-Projects/Asynchronous-SPDIF-Mixer
"Asynchronous SPDIF Mixer" synchronizes and mixes up to three asynchronous S/PDIF streams into a 48 kHz output. Running on an STM32H743 and developed in C++ with CubeIDE, it compensates for drift with interpolation.
141 parts13MIT - 4 layers188.1 × 79 mm
