2 layers
OPA380
Texas Instruments
- Part id
- ti/OPA380
- Category
- Uncategorised
- Pins
- 5
- Used on
- 6 open-source boards
Overview
The OPA380 is an uncategorised made by Texas Instruments with 5 pins.
PCBKit's library has its KiCad symbol (Celestial_Opamp:TI OPA380, from Altium's library), ready for a KiCad board. 6 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
The library has no footprint for this part yet.
Pinout
5| Pin | Name | Type |
|---|---|---|
| 2 | - | Passive |
| 3 | + | Passive |
| 4 | V- | Passive |
| 6 | OUT | Passive |
| 7 | V+ | Passive |
Open-source boards using it
6- 2 layers80 × 294 mm
Cubesat panel
SFUSatClub/xy-Panel
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
68 parts - 2 layers80 × 80 mm
Z panel
SFUSatClub/z-panel
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
43 parts - 2 layers18.5 × 4.3 mm
PHOTOBOARD
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
11 parts11 - 2 layers315.8 × 53.1 mm
Thermoboard
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
344 parts11 - 4 layers100 × 60 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
17 parts2
Questions
Is there a KiCad symbol and footprint for the OPA380?
Yes. The symbol is Celestial_Opamp:TI OPA380, both drawn on this page. PCBKit places them on a board for you when you design with it.
Which open-source boards use the OPA380?
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.