2 layers
2 layers80 × 80 mm
Z panel
SFUSatClub/z-panelThis repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
- Size
- 80 × 80 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 43
- Nets
- 19
- Pads
- 110
- Tracks, vias
- 211, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Feb 2018
- Updated
- 2 Jun 2018
Overview
Z panel is an open-source printed circuit board by SFUSatClub, from the SFUSatClub/z-panel repository on GitHub. It is a 2-layer board of 80 × 80 mm with 43 parts on 19 nets, routed with 211 tracks and 33 vias.
It is built around the OPA380. Its parts include 16 resistors, 8 connectors, 4 capacitors, 4 ICs and 4 diodes.
Main components
1README
README.mdZ Face Panel
KiCad project for the outside panel attached to the z faces of the cubesat. The panel contains a SMT GPS antenna and 4 sun sensors. The interface is a MCX jack for the GPS and a 14 pin ribbon cable for the sun sensor power and IO.
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
1. Open a git shell
2. Navigate to the directory you wish to place the repository inside
3. git clone --recursive "https://github.com/SFUSatClub/z-panel.git"If you modify either the component schematic or footprint libraries you must push those changes to the SFUSatClub/KiCad-Lib repository, then commit the project repository.
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0R | SFUSat-res:R_0402 | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | 0.1uF | Capacitors_SMD:C_0402 | C100, C110, C120, C130 |
| 4 | 2K2 | Resistors_SMD:R_0402 | R100, R110, R120, R130 |
| 4 | DNP | Resistors_SMD:R_0402 | R101, R111, R121, R131 |
| 4 | D_Photo | SFUSat:SFH2430 | D100, D110, D120, D130 |
| 4 | OPA380 | SFUSat:VSSOP_8 | U100, U110, U120, U130 |
| 4 | PC104PTH | SFUSat:PC104PTH | J2, J3, J4, J5 |
| 2 | TEST_1P | SFUSat:via-0.97mm | J7, J8 |
| 1 | GPS_ANTENNA | SFUSat:GPS_ANT_4mm | A1 |
| 1 | LOGO | SFUSat:SFUSat_15mm_2 | G*** |
| 1 | MOLEX_FFC-14 | SFUSat:MOLEX_FFC-14 | J1 |
| 1 | TEST_1P | SFUSat:vis-0.6mm | J6 |
The 38 most common of 43 parts.
Similar boards
- 2 layers80 × 294 mm
Cubesat panel
SFUSatClub/xy-Panel
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
68 parts - 2 layers18.5 × 4.3 mm
PHOTOBOARD
ParadigmHyperloop/electrical
All schematics and layouts in KiCad, plus some simulations
11 parts11 - 4 layers100 × 60 mm
Device
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
17 parts2 - 2 layers52.2 × 52.2 mm
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
43 parts3kApache-2.0 - 2 layers146.1 × 49.5 mm
Breakout 121pin 368255-2-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
43 parts1.2k - 2 layers33 × 34 mm
- 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR RIGHT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
43 parts431
Questions
How big is the Z panel PCB?
It measures 80 × 80 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Z panel use?
43 parts, built around the OPA380. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Z panel KiCad files?
From the SFUSatClub/z-panel repository on GitHub, at the commit this page was made from: the board is z-panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Z panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask SFUSatClub before reusing the design.