

STM32F042F6P6
My own custom development boards
- Size
- 22.9 × 25.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 30
- Pads
- 105
- Tracks, vias
- 260, 45
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Nov 2023
- Updated
- 8 Sep 2024
Overview
STM32F042F6P6 is an open-source printed circuit board by jay94ks, from the jay94ks/elecdev repository on GitHub, published under the MIT licence. It is a 2-layer board of 22.9 × 25.5 mm with 23 parts on 30 nets, routed with 260 tracks and 45 vias.
It is built around the XC6220B331MR and 1N5819WS. Its parts include 8 capacitors, 6 resistors, 4 connectors, 3 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
2XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
README
stm32/g030f6/README.mdSTM32 G030F6Px
ARM® Cortex®-M0, 32bit, TSOC-20.
Features: 64 MHz MAX, 32K Flash, 8K RAM, USART, SPI, I2C.
Board Size: 17.78 mm * 25.4 mm.
Price: about 2,800 KRW, 2.11 USD.
Gerber files.
Download: https://github.com/jay94ks/elecdev/blob/main/stm32/g030f6/STM32G030F6P6_v1.zip
Schematic.

Board Rendering.

Artwork.
Top side

Bottom side

Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C9 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2, C5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C10 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 56k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | L | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | R | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | STLINK | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | USB_C_REC_16PIN | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U1 |
More from jay94ks/elecdev
9- 2 layers78.1 × 61 mm

- 2 layers40.6 × 51 mm

- 2 layers22.9 × 28.9 mm

- 2 layers17.8 × 25.4 mm

- 2 layers22.8 × 41.4 mm

- 2 layers22.9 × 38.2 mm

- 2 layers18.2 × 25.5 mm

- 2 layers18.2 × 25.4 mm

- 2 layers17.5 × 13.7 mm

Similar boards
- 2 layers106.5 × 125.4 mm

- 2 layers40 × 33 mm

- 2 layers34.8 × 14.8 mm

MicroBot
Rishabh416/microbot
My first fully custom project inspired by the microbots from the movie Big Hero 6. My goal is to get into swarm robotics and I believe this is a HUGE leap in that direction, but a good moment to learn.
68 parts - 2 layers42 × 67 mm

- 4 layers49.5 × 29 mm

XESC2
ClemensElflein/xESC
The xESC is an easy to use, low cost electronic speed controller (ESC) design for sensored brushless DC (BLDC) motors.
114 parts378 - 2 layers192.4 × 50 mm

- 2 layers87.6 × 73 mm

Stemcell panel
megamind4089/STeMCell
STM32F4 breakout board in pro micro pinout. Designed mainly for ergo split keyboards.
258 parts123 - 2 layers271.5 × 91.8 mm

Questions
How big is the STM32F042F6P6 PCB?
It measures 22.9 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F042F6P6 use?
23 parts, built around the XC6220B331MR and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F042F6P6 KiCad files?
From the jay94ks/elecdev repository on GitHub, at the commit this page was made from: the board is stm32/f042f6/STM32F042F6P6.kicad_pcb and its schematic misc/USB_C_BREAKOUT/USB_C_BREAKOUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F042F6P6 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).