4 layers170 × 105.1 mm
2 layers40 × 33 mm
- Size
- 40 × 33 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 157
- Nets
- 114
- Pads
- 476
- Tracks, vias
- 1,238, 299
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Feb 2026
- Updated
- 11 Feb 2026
Overview
Recab is an open-source printed circuit board by hung1508, from the hung1508/Recab_mini_HW repository on GitHub. It is a 2-layer board of 40 × 33 mm with 157 parts on 114 nets, routed with 1,238 tracks and 299 vias.
It is built around the ESP32-S3-WROOM-1-N8, ES8311 and MT29F2G01ABAGDWB-IT:G, with the NS4150B, ICS-43434 and TP4056 among its other parts. Its parts include 70 capacitors, 35 resistors, 8 inductors, 7 ICs and 6 diodes. It belongs with the ESP32 boards of this library.
Main components
12
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ES8311
QFN-20-EP(3x3)-40℃~+105℃ 0uA 1.8V~3.3V QFN-20-EP(3x3) Audio Interface ICs ROHSEverest-semiSignal Switches, Multiplexers, Decoders
MT29F2G01ABAGDWB-IT:G
UPDFN-8-40℃~+85℃ 10 years 100,000 cycles 133MHz 2.7V~3.6V 220us 2Gbit 2ms Read buffer function、ECC error correction function、OTP region write protection and lock function、Hardware write protection function、Write enable latch、Software write protection function、Hardware reset function SPI Yes U-PDFN-8(6x8) NAND FLASH ROHSMicron TechNAND FLASH
NS4150B
MSOP-8-40℃~+85℃ -80dB 0.1% 1 Pair Differential Inputs 1-Channel 3V~5.25V 3Wx1@4Ω 4mA 88%、90% Automatic mute/no-noise switch、Enable/shutdown function、Filterless architecture、ESD protection Class D MSOP-8 Audio Amplifiers ROHSShenzhen Nsiway TechAudio Amplifiers
ICS-43434
LGA-6(3.5x2.7)-26dB -40℃~+85℃ 0.98mm 1.65V~3.63V 2.65mm 3.5mm 550uA 64dB I2S Omnidirectional Omnidirectional pickup LGA-6(3.5x2.7) MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
ESD9L5.0ST5G
SOD-9230.5pF 100nA 40W@8/20us 4A 5V 7.8V 9V ESD Unidirectional SOD-923 ESD and Surge Protection (TVS/ESD) ROHSMSKSEMIESD And Surge Protection (TVS/ESD)
SI1308EDL
SC-70-3-55℃~+150℃ 1 N-channel 1.4nC@10V 1.5A 1.5V 105pF 11pF 132mΩ@10V 23pF 30V 400mW N-Channel SOT-323 MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
157| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 1uF | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14, C21, C22, C27, C29, C34, C37, C41, C42, C44, C47, C52, C53, C54 +9 |
| 20 | ~ | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP10, TP11, TP12, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28 +4 |
| 14 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C11, C28, C31, C39, C43, C46, C49, C50, C51, C55, C66, C67, C75 |
| 9 | 22pF | Capacitor_SMD:C_0402_1005Metric | C25, C26, C30, C32, C33, C60, C62, C64, C65 |
| 8 | 0R | Resistor_SMD:R_0402_1005Metric | R9, R11, R12, R15, R16, R18, R32, R39 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric | R13, R14, R19, R21, R28, R29, R35, R41 |
| 7 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C23, C24, C38, C48 |
| 4 | ~ | Inductor_SMD:L_0603_1608Metric | L3, L7, L8, L9 |
| 3 | 100K | Resistor_SMD:R_0402_1005Metric | R17, R20, R40 |
| 3 | 22R | Resistor_SMD:R_0402_1005Metric | R4, R5, R37 |
| 3 | 330pF | Capacitor_SMD:C_0402_1005Metric | C70, C71, C73 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D6, D7, D8 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW4, SW5, SW6 |
| 2 | 100uF | Capacitor_SMD:C_0805_2012Metric | C58, C59 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C9, C35 |
| 2 | 120Ω@100MHz | Inductor_SMD:L_0402_1005Metric | L11, L12 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C19 |
| 2 | 200K 1% | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 33K | Resistor_SMD:R_0402_1005Metric | R34, R38 |
| 2 | 47R | Resistor_SMD:R_0603_1608Metric | R30, R31 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | SW_Push | TL6340AF160Q:SW_TL6340AF160Q | SW2, SW3 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C36 |
| 1 | 0.47R | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 0R | Resistor_SMD:R_1206_3216Metric | R33 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D2 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 2K4 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 470uF 10V | Capacitor_SMD:CP_Elec_3x5.3 | C1 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C74 |
| 1 | 47uH/1.5A | Inductor_SMD:L_Cenker_CKCS4020 | L1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Conn_01x06 | Connector_Audio:Jack_3.5mm_PJ311_Horizontal | J2 |
| 1 | ES8311 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | U1 |
| 1 | ESD9L5.0ST5G | Diode_SMD:D_SOD-923 | D3 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U3 |
| 1 | GDEY027T91 | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | P1 |
| 1 | ICS-43434 | Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mm | U6 |
| 1 | LEDR | LED_SMD:LED_0402_1005Metric | D4 |
| 1 | MT29F2G01ABAGDWB-IT:G | MT29F2G01ABAGDWB-IT_G:SON127P600X800X65-8N | U5 |
| 1 | NS4150B | Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm_ThermalVias | U7 |
| 1 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | TP4056 | TP4056:SOP127P600X175-9N | U2 |
| 1 | TP_VSYS_5V | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | XC6220B331MR | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ~ | Inductor_SMD:L_0805_2012Metric | L10 |
Similar boards
- 4 layers74.1 × 130 mm
- 2 layers60 × 150 mm
Phone
TheEinfachFelix/CampPhone
Warum habe ich mich dagegen entschieden, das Sim Modul selber zu implementieren? Ich habe kein Chip gefunden, der günstiger als das fertige Modul war, und ein Datenblatt in Englischer Sprache hat.
137 parts - 2 layers45 × 45 mm
Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130 - 2 layers35 × 45 mm
Aether
EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration
57 parts129 - 4 layers70.2 × 71 mm
C3-27-epaper touch
martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)
64 parts32Apache-2.0 - 2 layers
HabitReminderEPaper
Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done
52 parts - 2 layers65.4 × 71 mm
Questions
How big is the Recab PCB?
It measures 40 × 33 mm and has 2 copper layers, 1 mm thick.
What parts does the Recab use?
157 parts, built around the ESP32-S3-WROOM-1-N8, ES8311, MT29F2G01ABAGDWB-IT:G and NS4150B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Recab KiCad files?
From the hung1508/Recab_mini_HW repository on GitHub, at the commit this page was made from: the board is Recab.kicad_pcb and its schematic Recab.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Recab design in my own project?
Its repository states no licence, so its author keeps all rights: ask hung1508 before reusing the design.