
HabitReminder
Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done
HabitReminderEPaper is an open-source printed circuit board by Rikeroo, from the Rikeroo/habit-reminder repository on GitHub. It is a 2-layer board with 52 parts on 91 nets.
It is built around the ESP32-WROOM-32D, AMS1117-3.3 and MBR0530, with the WS2812B, S8050 and 1N5819WS among its other parts. Its parts include 18 capacitors, 9 resistors, 8 diodes, 5 switches and 3 ICs. It belongs with the ESP32 boards of this library.
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1uF | Capacitor_SMD:C_0201_0603Metric | C1, C2, C4, C5, C6, C7, C8, C9, C10, C18 |
| 4 | 10uF | Capacitor_SMD:C_0201_0603Metric | C12, C13, C16, C17 |
| 3 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C3, C14, C15 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4, D5, D6 |
| 2 | 12K | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R4, R5 |
| 2 | 5.11K | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R7, R8 |
| 2 | S8050 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q3 |
| 1 | 0.47 | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R3 |
| 1 | 10K | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R1 |
| 1 | 10k | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | PWR_C1 |
| 1 | 1M | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R6 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D7 |
| 1 | 2.2K | PCM_Resistor_SMD_AKL:R_0201_0603Metric | R9 |
| 1 | 3.3 LED | Diode_SMD:D_0201_0603Metric | D8 |
| 1 | 3/4 LINE SPI | PCM_Jumper_AKL:Jumper_P2.54mm_D0.7mm | JP1 |
| 1 | 4.7uF | Capacitor_SMD:C_0201_0603Metric | C11 |
| 1 | 68uH | Inductor_SMD:L_0201_0603Metric | L1 |
| 1 | A/B SW | Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Boot | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U1 |
| 1 | PUSH_1 | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | PUSH_2 | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | PUSH_3 | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | Si1308EDL | Package_TO_SOT_SMD:SOT-323_SC-70 | Q1 |
| 1 | UART Pins | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | ~ | Connector_FFC-FPC:Jushuo_AFC07-S24FCA-00_1x24-1MP_P0.50_Horizontal | J1 |

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54



chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.



EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration

martinberlin/bistable-smart-switch
An epaper switch project with 2 PCBs, controller+touch, and 220AC to 3DC with Relay (Latch or solid-state)
52 parts, built around the ESP32-WROOM-32D, AMS1117-3.3, MBR0530 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Rikeroo/habit-reminder repository on GitHub, at the commit this page was made from: the board is pcb/HabitReminderEPaper/HabitReminderEPaper.kicad_pcb and its schematic pcb/HabitReminder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Rikeroo before reusing the design.