
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

JanTec Tensile Testing Machine
Mainboard ATLAS is an open-source printed circuit board by jan-tec, from the jan-tec/tensile-tester repository on GitHub. It is a 2-layer board of 100 × 80 mm with 25 parts on 57 nets, routed with 127 tracks and 0 vias.
It is built around the TSR 1-2450. Its parts include 6 capacitors, 6 connectors, 1 IC, 1 diode and 1 fuse. It belongs with the computers and single-board computers boards of this library.
Custom carrier mainboard of the tensile test machine: hosts the ESP32 DevKit (2x15 pin header footprint), HX711 load-cell breakout, TMC2209 stepper driver breakouts, endstop connectors and the 5 V rail.
Imported 2026-10-10 from the designer's KiCad project (folder raw/,
untracked) into version control. KiCad 9 project.
| File | Purpose |
|---|---|
Mainboard-ATLAS.kicad_sch | Main schematic (ENDSTOP1/ENDSTOP2 nets, power, HX711, drivers) |
Mainboard-ATLAS.kicad_pcb | PCB layout (2-layer) |
Mainboard-ATLAS.kicad_pro / .kicad_prl | KiCad project / board settings |
Breakoutboards.kicad_sym | Custom symbols (ESP32 DevKit, HX711 carrier) |
PEM.kicad_sym | PEM fastener symbols |
Breakoutboard-Footprints.pretty/ | Custom footprints |
fp-lib-table, sym-lib-table | Library tables (use ${KIPRJMOD} relative refs) |
gerber/ | Manufacturing output of record (2026-07-09 fab run) |
.DS_Store, KiCad lock files (~*.lck), fp-info-cache (4 MB cache,
regenerates), Breakoutboards.bak, Mainboard-ATLAS-backups/ (28
auto-backup zips), Experiment.kicad_pcb.zip (predecessor board,
Jan 2026, superseded by Mainboard-ATLAS), gerber.zip (byte-identical
duplicate of gerber/ plus __MACOSX/ AppleDouble junk - content
cmp-verified equal during PR review).
# netlist (net -> pin mapping, e.g. ENDSTOP1):
kicad-cli sch export netlist --format kicadsexpr \
hardware/mainboard-atlas/Mainboard-ATLAS.kicad_sch -o /tmp/atlas.net
# render schematic/PCB to PNG/SVG/PDF:
kicad-cli sch export svg Mainboard-ATLAS.kicad_sch -o out/
kicad-cli pcb export svg Mainboard-ATLAS.kicad_pcb -o out/ --page-size-mode currentPython parsing/writing of these files: kiutils (see repo .venv).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 // 100nF, C4 // 100nF, C6 // 100nF |
| 3 | 100µF/35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 // 100µF, C3 // 100µF, C5 // 100µF |
| 3 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2, J3, LOADCELL |
| 2 | Conn_01x03_Pin | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | ENDSTOP1, ENDSTOP2 |
| 2 | ~ | Module:Pololu_Breakout-16_15.2x20.3mm | TMC2209, TMC2209 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 // 1N5819 |
| 1 | 3.3V OUT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Fuse 2A T | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 // Fuse 2A T |
| 1 | J1 // 24V IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U1 // TSR_1-2450 |
| 1 | ~ | Breakoutboard-Footprints:HX711-Breakout-6-4 | HX711 |
| 1 | ~ | Breakoutboard-Footprints:ESP32_2x15_P254_Row25 | ESP1 |
The 21 most common of 25 parts.

corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

hberntsen/mhi-ac-ctrl-esp32
Control MHI Airconditioning locally using your own ESP32 series chip!




idlehandsdev/shark_bait
The files and firmware for the Shark Bait wireless pumping system.


It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the TSR 1-2450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jan-tec/tensile-tester repository on GitHub, at the commit this page was made from: the board is hardware/mainboard-atlas/Mainboard-ATLAS.kicad_pcb and its schematic hardware/mainboard-atlas/Mainboard-ATLAS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jan-tec before reusing the design.